ASUS BW16D1HT FW 3.00 detects BD-R as BD-ROM #839

Closed
opened 2026-01-29 15:30:44 +00:00 by claunia · 1 comment
Owner

Originally created by @TheRogueArchivist on GitHub (Nov 4, 2021).

Version

5.3.0

Commit hash

No response

Tested debug version?

  • Yes

Which operating systems have you used?

  • Windows
  • Linux
  • macOS
  • Other

What is the architectural bit size you're using?

  • 32-bit
  • 64-bit
  • Unsure or unknown

What processor are you using?

  • An Intel or AMD
  • An ARM or Apple Silicon
  • Unsure or unknown

Device manufacturer

ASUS

Device model

BW16D1HT

Bus the device uses to attach to the computer

  • Parallel ATA
  • Serial ATA
  • SCSI (any)
  • ATAPI (mark above if parallel or serial)
  • USB
  • FireWire
  • PCMCIA
  • SecureDigital
  • MultiMediaCard

USB cable or card reader manufacturer

No response

USB cable or card reader model

No response

What were you doing when it failed?

  • I was dumping media (disk, tape, etc)...
  • I was retrieving media (disk, tape, etc) information...
  • I was scanning media (disk, tape, etc)...
  • I was retrieving device information...

Description

When Aaru identifies the media type of a BD-R on an ASUS BW16D1HT drive on firmware revision 3.00, it gets detected as BD-ROM. I believe this is fixed in later revisions but don't have a more updated drive to test at the moment. BD-RE is correctly identified as itself. I test two separate single layer BD-R discs, which are both affected. These discs were tested on another BD drive, confirming this is at least a drive (if not firmware revision) specific bug.

Exact command line used

aaru m info D:

Expected behavior

Media to be identified as BD-R

Actual behavior

Media is identified as BD-ROM

Output of command execution with debug output enabled

aaru 5.3.0+5c70b325 built by khepri in Debug, modified
Copyright c 2011-2021 Natalia Portillo

DEBUG (Media-Info command): --debug=True
DEBUG (Media-Info command): --device=D:
DEBUG (Media-Info command): --output-prefix=
DEBUG (Media-Info command): --verbose=False
DEBUG (ATA Device): IDENTIFY PACKET DEVICE took 3.9537 ms.
DEBUG (SCSI Device): INQUIRY took 0.128 ms.
DEBUG (ATA Device): IDENTIFY PACKET DEVICE took 0.5695 ms.
DEBUG (SCSI Device): GET CONFIGURATION (Starting Feature Number: 264, Return Type: Single, Sense: False, Last Error: 0) took 0.3192 ms.
DEBUG (SCSI Device): TEST UNIT READY took 0.307 ms.
DEBUG (ATA Device): IDENTIFY PACKET DEVICE took 0.606 ms.
DEBUG (SCSI Device): INQUIRY took 0.1177 ms.
DEBUG (SCSI Device): MODE SENSE(10) took 0.4181 ms.
DEBUG (SCSI Device): GET CONFIGURATION (Starting Feature Number: 0, Return Type: All, Sense: False, Last Error: 0) took 1.0167 ms.
DEBUG (SCSI Device): REPORT ASF (AGID: 0, Sense: False, Last Error: 0) took 0.2004 ms.
DEBUG (SCSI Device): READ CAPACITY took 3.585 ms.
DEBUG (SCSI Device): READ CAPACITY(16) took 0.6255 ms.
DEBUG (SCSI Device): GET CONFIGURATION (Starting Feature Number: 0, Return Type: Current, Sense: False, Last Error: 0) took 0.7062 ms.
DEBUG (Media-Info command): GET CONFIGURATION current profile is 0040h
DEBUG (Media-Info command): READ DISC STRUCTURE: Recognized Format Layers
SCSI SENSE: ILLEGAL REQUEST
ILLEGAL FIELD IN CDB

DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Dvd, Address: 0, Layer Number: 0, Format: WriteProtectionStatus, AGID: 0, Sense: False, Last Error: 0) took 0.1557 ms.
DEBUG (SCSI Device): INVALIDATE AGID (AGID: 0, Sense: True, Last Error: 0) took 0.511 ms.
DEBUG (SCSI Device): REPORT AGID CSS/CPPM (AGID: 0, Sense: True, Last Error: 0) took 3.5985 ms.
DEBUG (SCSI Device): INVALIDATE AGID (AGID: 1, Sense: True, Last Error: 0) took 1.84 ms.
DEBUG (SCSI Device): REPORT AGID CSS/CPPM (AGID: 1, Sense: True, Last Error: 0) took 2.3026 ms.
DEBUG (SCSI Device): INVALIDATE AGID (AGID: 2, Sense: True, Last Error: 0) took 2.7277 ms.
DEBUG (SCSI Device): REPORT AGID CSS/CPPM (AGID: 2, Sense: True, Last Error: 0) took 2.2265 ms.
DEBUG (SCSI Device): INVALIDATE AGID (AGID: 3, Sense: True, Last Error: 0) took 2.1986 ms.
DEBUG (SCSI Device): REPORT AGID CSS/CPPM (AGID: 3, Sense: True, Last Error: 0) took 2.2023 ms.
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Bd, Address: 0, Layer Number: 0, Format: DiscInformation, AGID: 0, Sense: False, Last Error: 0) took 0.1722 ms.
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Bd, Address: 0, Layer Number: 0, Format: Pac, AGID: 0, Sense: False, Last Error: 0) took 0.1827 ms.
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Bd, Address: 0, Layer Number: 0, Format: BurstCuttingArea, AGID: 0, Sense: False, Last Error: 0) took 0.1578 ms.
DEBUG (SCSI Device): READ MEDIA SERIAL NUMBER took 0.1575 ms.
DEBUG (SCSI Device): READ DISC INFORMATION (Data Type: DiscInformation, Sense: False, Last Error: 0) took 0.2737 ms.
DEBUG (SCSI Device): GET CONFIGURATION (Starting Feature Number: 0, Return Type: Current, Sense: False, Last Error: 0) took 0.7053 ms.
DEBUG (Media-Info command): GET CONFIGURATION current profile is 0040h
DEBUG (SCSI Device): READ CD (LBA: 0, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 2.874 ms.
DEBUG (SCSI Device): READ CD (LBA: 0, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 2.9314 ms.
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Bd, Address: 0, Layer Number: 0, Format: DiscInformation, AGID: 0, Sense: False, Last Error: 0) took 0.1602 ms.
DEBUG (SCSI Device): READ (16) took 0.5387 ms.
DEBUG (SCSI Device): READ (12) took 86.0714 ms.
DEBUG (SCSI Device): READ (12) took 0.4081 ms.
DEBUG (SCSI Device): READ (12) took 2.2591 ms.
DEBUG (Media-info Command): PlayStation 2 boot sectors SHA256: de676bae28a480011d3d012db14bef539324e62a841a9627863c689bea168af3
Media has 2992384 blocks of 2048 bytes/each. (for a total of 5.708 GiB)
Blu-ray Disc Information:
DI Unit Sequence: 0
DI Unit Format: 0x01
There are 5 per block
This DI refers to layer 0
This DI starts a new unit
DI Unit is 98 bytes
Disc type identifier: "BDR"
Disc size: 120mm
Disc class: 0
Disc version: 1
This disc has 1 layers
This disc does not contain a DVD layer.
This disc does not contain a CD layer.
Disc uses a 74.5nm channel giving 25 Gb per layer.
Disc uses positive polarity.
Recorded marks have a lower reflectivity than unrecorded ones (HTL disc).
Disc has a BCA.
Disc does not specify a maximum transfer rate.
Last user data PSN for disc: 0
First address unit number of data zone in this layer: 131072
Last address unit number of data zone in this layer: 1658494
Disc manufacturer ID: "VERBAT"
Disc media type ID: "IMe"
Disc timestamp: 0x7DA3
Disc product revison number: 0
Blu-ray DI Unit format dependent contents as hex follows:Offset   00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
000000   01 EC 64 64 28 28 28 28 1E 1E 1E 1E 00 00 00 00   .ìdd((((........
000010   63 66 72 04 04 32 1E 96 80 00 00 00 00 08 08 08   cfr..2..........
000020   08 10 10 10 10 48 00 48 00 48 00 48 00 48 00 48   .....H.H.H.H.H.H
000030   00 48 00 48 00 48 00 48 00 48 00 48 00 80 80 A0   .H.H.H.H.H.H... 
000040   C0 E0                                             Aà

DI Unit Sequence: 1
DI Unit Format: 0x01
There are 5 per block
This DI refers to layer 0
This DI starts a new unit
DI Unit is 98 bytes
Disc type identifier: "BDR"
Disc size: 120mm
Disc class: 0
Disc version: 1
This disc has 1 layers
This disc does not contain a DVD layer.
This disc does not contain a CD layer.
Disc uses a 74.5nm channel giving 25 Gb per layer.
Disc uses positive polarity.
Recorded marks have a lower reflectivity than unrecorded ones (HTL disc).
Disc has a BCA.
Disc does not specify a maximum transfer rate.
Last user data PSN for disc: 0
First address unit number of data zone in this layer: 131072
Last address unit number of data zone in this layer: 1658494
Disc manufacturer ID: "VERBAT"
Disc media type ID: "IMe"
Disc timestamp: 0x7DA3
Disc product revison number: 0
Blu-ray DI Unit format dependent contents as hex follows:Offset   00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
000000   03 D7 64 64 28 2D 2D 2D 1E 23 23 23 00 00 00 00   .xdd(---.###....
000010   70 68 70 04 04 44 1E 82 A0 18 18 18 18 18 18 18   php..D.. .......
000020   18 20 20 20 20 68 00 68 00 68 00 68 00 68 00 68   .    h.h.h.h.h.h
000030   00 68 00 68 00 68 00 68 00 68 00 68 00 A0 A0 D0   .h.h.h.h.h.h.  D
000040   D8 E0                                             Oà

DI Unit Sequence: 2
DI Unit Format: 0x03
There are 5 per block
This DI refers to layer 0
This DI starts a new unit
DI Unit is 81 bytes
Disc type identifier: "BDR"
Disc size: 120mm
Disc class: 0
Disc version: 1
This disc has 1 layers
This disc does not contain a DVD layer.
This disc does not contain a CD layer.
Disc uses a 74.5nm channel giving 25 Gb per layer.
Disc uses positive polarity.
Recorded marks have a lower reflectivity than unrecorded ones (HTL disc).
Disc has a BCA.
Disc does not specify a maximum transfer rate.
Last user data PSN for disc: 0
First address unit number of data zone in this layer: 131072
Last address unit number of data zone in this layer: 1658494
Disc manufacturer ID: "VERBAT"
Disc media type ID: "IMe"
Disc timestamp: 0x7DA3
Disc product revison number: 0
Blu-ray DI Unit format dependent contents as hex follows:Offset   00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
000000   03 D7 64 64 28 2D 2D 2D 1E 23 23 23 00 00 00 00   .xdd(---.###....
000010   65 64 75 9C 04 3A 1E 91 E8 E8 D0 28 28 28 28 28   edu..:..èèD(((((
000020   28 40 40 40 38 38 38 44 44 44 48 48 48 70 B0 C0   (@@@888DDDHHHp°A
000030   D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00   D...............
000040   00 00                                             ..


Blu-ray Burst Cutting Area:
Blu-ray Burst Cutting Area in hex follows:Offset   00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
000000   04 1E 10 15 12 64 03 10 18 03 18 08 30 33 B7 23   .....d......03·#
000010   04 1E 10 15 12 64 03 10 18 03 18 08 30 33 B7 23   .....d......03·#
000020   FC 42 44 52 01 12 01 00 00 00 00 00 00 00 00 00   üBDR............
000030   FC 42 44 52 01 12 01 00 00 00 00 00 00 00 00 00   üBDR............


Standard Disc Information:
Disc type declared as CD-DA or CD-ROM
Disc is finalized
Last session is complete
First track on disc is track 1
Disc has 1 sessions
First track in last session is track 1
Last track in last session is track 1
Last session Lead-In address is 0 (as LBA) or 00:00:00
Last possible Lead-Out address is 0 (as LBA) or 00:00:00
Disc is defined for unrestricted use

Media Serial Number: 564552424154494D657DA300
Media identified as BDROM

Media details

Multiple single layer BD-Rs.
693.zip

Originally created by @TheRogueArchivist on GitHub (Nov 4, 2021). ### Version 5.3.0 ### Commit hash _No response_ ### Tested debug version? - [X] Yes ### Which operating systems have you used? - [X] Windows - [ ] Linux - [ ] macOS - [ ] Other ### What is the architectural bit size you're using? - [ ] 32-bit - [X] 64-bit - [ ] Unsure or unknown ### What processor are you using? - [X] An Intel or AMD - [ ] An ARM or Apple Silicon - [ ] Unsure or unknown ### Device manufacturer ASUS ### Device model BW16D1HT ### Bus the device uses to attach to the computer - [ ] Parallel ATA - [X] Serial ATA - [ ] SCSI (any) - [ ] ATAPI (mark above if parallel or serial) - [ ] USB - [ ] FireWire - [ ] PCMCIA - [ ] SecureDigital - [ ] MultiMediaCard ### USB cable or card reader manufacturer _No response_ ### USB cable or card reader model _No response_ ### What were you doing when it failed? - [X] I was dumping media (disk, tape, etc)... - [X] I was retrieving media (disk, tape, etc) information... - [X] I was scanning media (disk, tape, etc)... - [ ] I was retrieving device information... ### Description When Aaru identifies the media type of a BD-R on an ASUS BW16D1HT drive on firmware revision 3.00, it gets detected as BD-ROM. I believe this is fixed in later revisions but don't have a more updated drive to test at the moment. BD-RE is correctly identified as itself. I test two separate single layer BD-R discs, which are both affected. These discs were tested on another BD drive, confirming this is at least a drive (if not firmware revision) specific bug. ### Exact command line used aaru m info D: ### Expected behavior Media to be identified as BD-R ### Actual behavior Media is identified as BD-ROM ### Output of command execution with debug output enabled ```shell aaru 5.3.0+5c70b325 built by khepri in Debug, modified Copyright c 2011-2021 Natalia Portillo DEBUG (Media-Info command): --debug=True DEBUG (Media-Info command): --device=D: DEBUG (Media-Info command): --output-prefix= DEBUG (Media-Info command): --verbose=False DEBUG (ATA Device): IDENTIFY PACKET DEVICE took 3.9537 ms. DEBUG (SCSI Device): INQUIRY took 0.128 ms. DEBUG (ATA Device): IDENTIFY PACKET DEVICE took 0.5695 ms. DEBUG (SCSI Device): GET CONFIGURATION (Starting Feature Number: 264, Return Type: Single, Sense: False, Last Error: 0) took 0.3192 ms. DEBUG (SCSI Device): TEST UNIT READY took 0.307 ms. DEBUG (ATA Device): IDENTIFY PACKET DEVICE took 0.606 ms. DEBUG (SCSI Device): INQUIRY took 0.1177 ms. DEBUG (SCSI Device): MODE SENSE(10) took 0.4181 ms. DEBUG (SCSI Device): GET CONFIGURATION (Starting Feature Number: 0, Return Type: All, Sense: False, Last Error: 0) took 1.0167 ms. DEBUG (SCSI Device): REPORT ASF (AGID: 0, Sense: False, Last Error: 0) took 0.2004 ms. DEBUG (SCSI Device): READ CAPACITY took 3.585 ms. DEBUG (SCSI Device): READ CAPACITY(16) took 0.6255 ms. DEBUG (SCSI Device): GET CONFIGURATION (Starting Feature Number: 0, Return Type: Current, Sense: False, Last Error: 0) took 0.7062 ms. DEBUG (Media-Info command): GET CONFIGURATION current profile is 0040h DEBUG (Media-Info command): READ DISC STRUCTURE: Recognized Format Layers SCSI SENSE: ILLEGAL REQUEST ILLEGAL FIELD IN CDB DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Dvd, Address: 0, Layer Number: 0, Format: WriteProtectionStatus, AGID: 0, Sense: False, Last Error: 0) took 0.1557 ms. DEBUG (SCSI Device): INVALIDATE AGID (AGID: 0, Sense: True, Last Error: 0) took 0.511 ms. DEBUG (SCSI Device): REPORT AGID CSS/CPPM (AGID: 0, Sense: True, Last Error: 0) took 3.5985 ms. DEBUG (SCSI Device): INVALIDATE AGID (AGID: 1, Sense: True, Last Error: 0) took 1.84 ms. DEBUG (SCSI Device): REPORT AGID CSS/CPPM (AGID: 1, Sense: True, Last Error: 0) took 2.3026 ms. DEBUG (SCSI Device): INVALIDATE AGID (AGID: 2, Sense: True, Last Error: 0) took 2.7277 ms. DEBUG (SCSI Device): REPORT AGID CSS/CPPM (AGID: 2, Sense: True, Last Error: 0) took 2.2265 ms. DEBUG (SCSI Device): INVALIDATE AGID (AGID: 3, Sense: True, Last Error: 0) took 2.1986 ms. DEBUG (SCSI Device): REPORT AGID CSS/CPPM (AGID: 3, Sense: True, Last Error: 0) took 2.2023 ms. DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Bd, Address: 0, Layer Number: 0, Format: DiscInformation, AGID: 0, Sense: False, Last Error: 0) took 0.1722 ms. DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Bd, Address: 0, Layer Number: 0, Format: Pac, AGID: 0, Sense: False, Last Error: 0) took 0.1827 ms. DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Bd, Address: 0, Layer Number: 0, Format: BurstCuttingArea, AGID: 0, Sense: False, Last Error: 0) took 0.1578 ms. DEBUG (SCSI Device): READ MEDIA SERIAL NUMBER took 0.1575 ms. DEBUG (SCSI Device): READ DISC INFORMATION (Data Type: DiscInformation, Sense: False, Last Error: 0) took 0.2737 ms. DEBUG (SCSI Device): GET CONFIGURATION (Starting Feature Number: 0, Return Type: Current, Sense: False, Last Error: 0) took 0.7053 ms. DEBUG (Media-Info command): GET CONFIGURATION current profile is 0040h DEBUG (SCSI Device): READ CD (LBA: 0, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 2.874 ms. DEBUG (SCSI Device): READ CD (LBA: 0, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 2.9314 ms. DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Bd, Address: 0, Layer Number: 0, Format: DiscInformation, AGID: 0, Sense: False, Last Error: 0) took 0.1602 ms. DEBUG (SCSI Device): READ (16) took 0.5387 ms. DEBUG (SCSI Device): READ (12) took 86.0714 ms. DEBUG (SCSI Device): READ (12) took 0.4081 ms. DEBUG (SCSI Device): READ (12) took 2.2591 ms. DEBUG (Media-info Command): PlayStation 2 boot sectors SHA256: de676bae28a480011d3d012db14bef539324e62a841a9627863c689bea168af3 Media has 2992384 blocks of 2048 bytes/each. (for a total of 5.708 GiB) Blu-ray Disc Information: DI Unit Sequence: 0 DI Unit Format: 0x01 There are 5 per block This DI refers to layer 0 This DI starts a new unit DI Unit is 98 bytes Disc type identifier: "BDR" Disc size: 120mm Disc class: 0 Disc version: 1 This disc has 1 layers This disc does not contain a DVD layer. This disc does not contain a CD layer. Disc uses a 74.5nm channel giving 25 Gb per layer. Disc uses positive polarity. Recorded marks have a lower reflectivity than unrecorded ones (HTL disc). Disc has a BCA. Disc does not specify a maximum transfer rate. Last user data PSN for disc: 0 First address unit number of data zone in this layer: 131072 Last address unit number of data zone in this layer: 1658494 Disc manufacturer ID: "VERBAT" Disc media type ID: "IMe" Disc timestamp: 0x7DA3 Disc product revison number: 0 Blu-ray DI Unit format dependent contents as hex follows:Offset 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 000000 01 EC 64 64 28 28 28 28 1E 1E 1E 1E 00 00 00 00 .ìdd((((........ 000010 63 66 72 04 04 32 1E 96 80 00 00 00 00 08 08 08 cfr..2.......... 000020 08 10 10 10 10 48 00 48 00 48 00 48 00 48 00 48 .....H.H.H.H.H.H 000030 00 48 00 48 00 48 00 48 00 48 00 48 00 80 80 A0 .H.H.H.H.H.H...  000040 C0 E0 Aà DI Unit Sequence: 1 DI Unit Format: 0x01 There are 5 per block This DI refers to layer 0 This DI starts a new unit DI Unit is 98 bytes Disc type identifier: "BDR" Disc size: 120mm Disc class: 0 Disc version: 1 This disc has 1 layers This disc does not contain a DVD layer. This disc does not contain a CD layer. Disc uses a 74.5nm channel giving 25 Gb per layer. Disc uses positive polarity. Recorded marks have a lower reflectivity than unrecorded ones (HTL disc). Disc has a BCA. Disc does not specify a maximum transfer rate. Last user data PSN for disc: 0 First address unit number of data zone in this layer: 131072 Last address unit number of data zone in this layer: 1658494 Disc manufacturer ID: "VERBAT" Disc media type ID: "IMe" Disc timestamp: 0x7DA3 Disc product revison number: 0 Blu-ray DI Unit format dependent contents as hex follows:Offset 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 000000 03 D7 64 64 28 2D 2D 2D 1E 23 23 23 00 00 00 00 .xdd(---.###.... 000010 70 68 70 04 04 44 1E 82 A0 18 18 18 18 18 18 18 php..D.. ....... 000020 18 20 20 20 20 68 00 68 00 68 00 68 00 68 00 68 . h.h.h.h.h.h 000030 00 68 00 68 00 68 00 68 00 68 00 68 00 A0 A0 D0 .h.h.h.h.h.h.  D 000040 D8 E0 Oà DI Unit Sequence: 2 DI Unit Format: 0x03 There are 5 per block This DI refers to layer 0 This DI starts a new unit DI Unit is 81 bytes Disc type identifier: "BDR" Disc size: 120mm Disc class: 0 Disc version: 1 This disc has 1 layers This disc does not contain a DVD layer. This disc does not contain a CD layer. Disc uses a 74.5nm channel giving 25 Gb per layer. Disc uses positive polarity. Recorded marks have a lower reflectivity than unrecorded ones (HTL disc). Disc has a BCA. Disc does not specify a maximum transfer rate. Last user data PSN for disc: 0 First address unit number of data zone in this layer: 131072 Last address unit number of data zone in this layer: 1658494 Disc manufacturer ID: "VERBAT" Disc media type ID: "IMe" Disc timestamp: 0x7DA3 Disc product revison number: 0 Blu-ray DI Unit format dependent contents as hex follows:Offset 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 000000 03 D7 64 64 28 2D 2D 2D 1E 23 23 23 00 00 00 00 .xdd(---.###.... 000010 65 64 75 9C 04 3A 1E 91 E8 E8 D0 28 28 28 28 28 edu..:..èèD((((( 000020 28 40 40 40 38 38 38 44 44 44 48 48 48 70 B0 C0 (@@@888DDDHHHp°A 000030 D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 D............... 000040 00 00 .. Blu-ray Burst Cutting Area: Blu-ray Burst Cutting Area in hex follows:Offset 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 000000 04 1E 10 15 12 64 03 10 18 03 18 08 30 33 B7 23 .....d......03·# 000010 04 1E 10 15 12 64 03 10 18 03 18 08 30 33 B7 23 .....d......03·# 000020 FC 42 44 52 01 12 01 00 00 00 00 00 00 00 00 00 üBDR............ 000030 FC 42 44 52 01 12 01 00 00 00 00 00 00 00 00 00 üBDR............ Standard Disc Information: Disc type declared as CD-DA or CD-ROM Disc is finalized Last session is complete First track on disc is track 1 Disc has 1 sessions First track in last session is track 1 Last track in last session is track 1 Last session Lead-In address is 0 (as LBA) or 00:00:00 Last possible Lead-Out address is 0 (as LBA) or 00:00:00 Disc is defined for unrestricted use Media Serial Number: 564552424154494D657DA300 Media identified as BDROM ``` ### Media details Multiple single layer BD-Rs. [693.zip](https://github.com/aaru-dps/Aaru/files/7479358/693.zip)
claunia added the bugdevicemedia labels 2026-01-29 15:30:44 +00:00
Author
Owner

@claunia commented on GitHub (Sep 28, 2025):

Fixed in f5ff4c7.

@claunia commented on GitHub (Sep 28, 2025): Fixed in f5ff4c7.
Sign in to join this conversation.
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: aaru-dps/Aaru-aaru-dps#839