Asked Copilot to comment the code.

zoo/lzd.c

@@ -1,5 +1,5 @@
 /*
-* This file is part of the Aaru Data Preservation Suite.
+ * This file is part of the Aaru Data Preservation Suite.
  * Copyright (c) 2019-2025 Natalia Portillo.
  *
  * This library is free software; you can redistribute it and/or modify
@@ -19,73 +19,83 @@
 // Lempel-Ziv-Davis compression implementation based on the public domain code from
 // Rahul Dhesi from zoo
 
+#include "lzd.h"
+#include <assert.h>
 #include <stdlib.h>
 #include <string.h>
-#include <assert.h>
-#include "lzd.h"
 #include "../library.h"
 
+// Reset the dictionary to its initial state
 static void init_dict(LZDContext *ctx)
 {
-    ctx->nbits     = 9;
+    ctx->nbits     = 9;           // start with 9‑bit codes
-    ctx->max_code  = 1u << 9;
+    ctx->max_code  = 1u << 9;     // maximum code value for current nbits
-    ctx->free_code = FIRST_FREE;
+    ctx->free_code = FIRST_FREE;  // next free dictionary slot
-    ctx->have_old  = 0;
+    ctx->have_old  = 0;           // no "previous code" yet
 }
 
+// Follow the head[] chain until you get the first literal byte of a code
 static int firstch(LZDContext *ctx, int code)
 {
     int steps = 0;
     while(code > 255)
-    {
+    {                                           // follow links until you hit a literal (0‑255)
-        if((unsigned)code > MAXMAX) return -1;
+        if((unsigned)code > MAXMAX) return -1;  // invalid code range
-        if(++steps > (int)MAXMAX) return -1;
+        if(++steps > (int)MAXMAX) return -1;    // prevent infinite loop
         code = ctx->head[code];
     }
     return code;
 }
 
+// Ensure there are at least nbits available in the bit buffer
 static int fill_bits(LZDContext *ctx)
 {
     while(ctx->bitcount < (int)ctx->nbits)
     {
-        if(ctx->in_pos >= ctx->in_len) return -1;
+        if(ctx->in_pos >= ctx->in_len) return -1;  // no more input available
+        // pull a byte from the input stream into bitbuf at current position
         ctx->bitbuf |= (uint64_t)ctx->in_ptr[ctx->in_pos++] << ctx->bitcount;
         ctx->bitcount += 8;
     }
     return 0;
 }
 
+// Read the next code of nbits from the bit buffer
 static int read_code(LZDContext *ctx)
 {
-    if(fill_bits(ctx) < 0) return -1;
+    if(fill_bits(ctx) < 0) return -1;                   // top up bits if needed
-    int code = (int)(ctx->bitbuf & masks[ctx->nbits]);
+    int code = (int)(ctx->bitbuf & masks[ctx->nbits]);  // mask off the low nbits
-    ctx->bitbuf >>= ctx->nbits;
+    ctx->bitbuf >>= ctx->nbits;                         // consume bits
     ctx->bitcount -= ctx->nbits;
     return code;
 }
 
+// Initialise a decompression context: allocate tables, set up initial dictionary
 LZDStatus LZD_Init(LZDContext *ctx)
 {
     memset(ctx, 0, sizeof *ctx);
+    // allocate head, tail and stack arrays to hold dictionary links and output stack
     ctx->head  = malloc((MAXMAX + 1) * sizeof *ctx->head);
     ctx->tail  = malloc((MAXMAX + 1) * sizeof *ctx->tail);
     ctx->stack = malloc((MAXMAX + 1) * sizeof *ctx->stack);
     if(!ctx->head || !ctx->tail || !ctx->stack) return LZD_NEED_INPUT;
 
+    // initialise first 256 dictionary entries to literal bytes
     for(int i = 0; i < 256; i++)
     {
         ctx->head[i] = -1;
         ctx->tail[i] = (uint8_t)i;
     }
+    // set stack pointers to empty
     ctx->stack_lim = ctx->stack + (MAXMAX + 1);
     ctx->stack_ptr = ctx->stack_lim;
-    init_dict(ctx);
+    init_dict(ctx);  // reset code size/free_code
     ctx->bitbuf   = 0;
     ctx->bitcount = 0;
     return LZD_OK;
 }
 
+// Point the context at a new input buffer
 LZDStatus LZD_Feed(LZDContext *ctx, const unsigned char *in, size_t in_len)
 {
     ctx->in_ptr = in;
@@ -94,26 +104,31 @@ LZDStatus LZD_Feed(LZDContext *ctx, const unsigned char *in, size_t in_len)
     return LZD_OK;
 }
 
+// Pull decompressed bytes into `out` up to out_len or until input is exhausted
 LZDStatus LZD_Drain(LZDContext *ctx, unsigned char *out, size_t out_len, size_t *out_produced)
 {
     size_t outpos = 0;
 
     while(outpos < out_len)
     {
+        // If there are bytes on the stack (from expanding a code), emit them first
         if(ctx->stack_ptr < ctx->stack_lim)
         {
             out[outpos++] = (uint8_t)*ctx->stack_ptr++;
             continue;
         }
 
+        // Otherwise, read the next code from the bitstream
         int raw = read_code(ctx);
         if(raw < 0)
         {
             *out_produced = outpos;
+            // If we emitted something, signal OK; otherwise tell caller we need more input
             return outpos > 0 ? LZD_OK : LZD_NEED_INPUT;
         }
         unsigned code = (unsigned)raw;
 
+        // Special code: CLEAR – reset the dictionary and read a fresh literal
         if(code == CLEAR)
         {
             init_dict(ctx);
@@ -128,6 +143,7 @@ LZDStatus LZD_Drain(LZDContext *ctx, unsigned char *out, size_t out_len, size_t
             out[outpos++] = (uint8_t)lit;
             continue;
         }
+        // Special code: Z_EOF – end of compressed stream
         if(code == Z_EOF)
         {
             *out_produced = outpos;
@@ -135,15 +151,17 @@ LZDStatus LZD_Drain(LZDContext *ctx, unsigned char *out, size_t out_len, size_t
         }
 
         unsigned in_code = code;
+        // Handle KwKwK case: code not yet in the dictionary
         if(code >= ctx->free_code)
         {
             if(!ctx->have_old) return LZD_DONE;
-            int fc = firstch(ctx, ctx->old_code);
+            int fc = firstch(ctx, ctx->old_code);  // get first character of previous code
             if(fc < 0) return LZD_DONE;
             *--ctx->stack_ptr = (char)fc;
             code              = ctx->old_code;
         }
 
+        // Walk backwards through dictionary, pushing bytes onto the stack
         while(code > 255)
         {
             *--ctx->stack_ptr = (char)ctx->tail[code];
@@ -152,11 +170,13 @@ LZDStatus LZD_Drain(LZDContext *ctx, unsigned char *out, size_t out_len, size_t
         uint8_t first_byte = (uint8_t)code;
         *--ctx->stack_ptr  = (char)first_byte;
 
+        // Add new sequence to dictionary if we have a valid previous code
         if(ctx->have_old && ctx->free_code <= MAXMAX)
         {
             ctx->tail[ctx->free_code] = first_byte;
             ctx->head[ctx->free_code] = (int)ctx->old_code;
             ctx->free_code++;
+            // Increase code width when table fills up to current max_code
             if(ctx->free_code >= ctx->max_code && ctx->nbits < MAXBITS)
             {
                 ctx->nbits++;
@@ -171,6 +191,7 @@ LZDStatus LZD_Drain(LZDContext *ctx, unsigned char *out, size_t out_len, size_t
     return LZD_OK;
 }
 
+// Free dynamic allocations inside an LZDContext
 void LZD_Destroy(LZDContext *ctx)
 {
     if(!ctx) return;
@@ -179,12 +200,14 @@ void LZD_Destroy(LZDContext *ctx)
     free(ctx->stack);
 }
 
+// Public API: allocate+initialise a new context
 AARU_EXPORT void AARU_CALL *CreateLZDContext(void)
 {
     LZDContext *c = malloc(sizeof *c);
     return c && LZD_Init(c) == LZD_OK ? c : (free(c), NULL);
 }
 
+// Public API: destroy and free a context
 AARU_EXPORT void AARU_CALL DestroyLZDContext(void *ctx)
 {
     if(ctx)
@@ -194,11 +217,13 @@ AARU_EXPORT void AARU_CALL DestroyLZDContext(void *ctx)
     }
 }
 
+// Public API wrapper to feed new compressed data
 AARU_EXPORT int AARU_CALL LZD_FeedNative(void *ctx, const unsigned char *data, size_t length)
 {
     return (int)LZD_Feed(ctx, data, length);
 }
 
+// Public API wrapper to drain decompressed data
 AARU_EXPORT int AARU_CALL LZD_DrainNative(void *ctx, unsigned char *outBuf, size_t outBufLen, size_t *produced)
 {
     return (int)LZD_Drain(ctx, outBuf, outBufLen, produced);