aaru-dps/Aaru.Server
1
0
Fork 0
mirror of https://github.com/aaru-dps/Aaru.Server.git synced 2025-12-16 19:24:27 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
87fa088e8486528e9962bbcdc097f76d894fb44e
Aaru.Server/DiscImageChef.Devices/Enums.cs

2314 lines
83 KiB
C#
Raw Blame History

using System;
namespace DiscImageChef.Devices
{
public static class Enums
{
#region ATA Commands
public enum AtaCommands : byte
{
#region Commands defined on Western Digital WD1000 Winchester Disk Controller
/// <summary>
/// Formats a track
/// </summary>
FormatTrack = 0x50,
/// <summary>
/// Reads sectors
/// </summary>
ReadOld = 0x20,
/// <summary>
/// Reads sectors using DMA
/// </summary>
ReadDmaOld = 0x28,
/// <summary>
/// Calibrates the position of the heads
/// Includes all commands from 0x10 to 0x1F
/// </summary>
Restore = 0x10,
/// <summary>
/// Seeks to a certain cylinder
/// </summary>
Seek = 0x70,
/// <summary>
/// Writes sectors
/// </summary>
WriteOld = 0x30,
#endregion Commands defined on Western Digital WD1000 Winchester Disk Controller
#region Commands defined on ATA rev. 4c
/// <summary>
/// Acknowledges media change
/// </summary>
AckMediaChange = 0xDB,
/// <summary>
/// Sends vendor-specific information that may be required in order to pass diagnostics
/// </summary>
PostBoot = 0xDC,
/// <summary>
/// Prepares a removable drive to respond to boot
/// </summary>
PreBoot = 0xDD,
/// <summary>
/// Checks drive power mode
/// </summary>
CheckPowerMode = 0xE5,
/// <summary>
/// Checks drive power mode
/// </summary>
CheckPowerModeAlternate = 0x98,
/// <summary>
/// Locks the door of the drive
/// </summary>
DoorLock = 0xDE,
/// <summary>
/// Unlocks the door of the drive
/// </summary>
DoorUnLock = 0xDF,
/// <summary>
/// Executes internal drive diagnostics
/// </summary>
ExecuteDriveDiagnostic = 0x90,
/// <summary>
/// Gets a sector containing drive identification and capabilities
/// </summary>
IdentifyDrive = 0xEC,
/// <summary>
/// Requests the drive to enter idle status
/// </summary>
Idle = 0xE3,
/// <summary>
/// Requests the drive to enter idle status
/// </summary>
IdleAlternate = 0x97,
/// <summary>
/// Requests the drive to enter idle status immediately
/// </summary>
IdleImmediate = 0xE1,
/// <summary>
/// Requests the drive to enter idle status immediately
/// </summary>
IdleImmediateAlternate = 0x95,
/// <summary>
/// Changes heads and sectors per cylinder for the drive
/// </summary>
InitializeDriveParameters = 0x91,
/// <summary>
/// Does nothing
/// </summary>
Nop = 0x00,
/// <summary>
/// Reads sectors using PIO transfer
/// </summary>
Read = 0x21,
/// <summary>
/// Reads the content of the drive's buffer
/// </summary>
ReadBuffer = 0xE4,
/// <summary>
/// Reads sectors using DMA transfer
/// </summary>
ReadDma = 0xC9,
/// <summary>
/// Reads sectors using DMA transfer, retrying on error
/// </summary>
ReadDmaRetry = 0xC8,
/// <summary>
/// Reads a sector including ECC bytes without checking them
/// </summary>
ReadLong = 0x23,
/// <summary>
/// Reads a sector including ECC bytes without checking them, retrying on error
/// </summary>
ReadLongRetry = 0x22,
/// <summary>
/// Reads multiple sectors generating interrupts at block transfers
/// </summary>
ReadMultiple = 0xC4,
/// <summary>
/// Reads sectors using PIO transfer, retrying on error
/// </summary>
ReadRetry = 0x20,
/// <summary>
/// Verifies sectors readability without transferring them
/// </summary>
ReadVerify = 0x41,
/// <summary>
/// Verifies sectors readability without transferring them, retrying on error
/// </summary>
ReadVerifyRetry = 0x40,
/// <summary>
/// Moves the heads to cylinder 0
/// </summary>
Recalibrate = Restore,
/// <summary>
/// Sets drive parameters
/// </summary>
SetFeatures = 0xEF,
/// <summary>
/// Enables <see cref="ReadMultiple"/> and <see cref="WriteMultiple"/> and sets the block length for these commands
/// </summary>
SetMultipleMode = 0xC6,
/// <summary>
/// Causes the drive to stop and sleep until a hardware or software reset
/// </summary>
Sleep = 0xE6,
/// <summary>
/// Causes the drive to stop and sleep until a hardware or software reset
/// </summary>
SleepAlternate = 0x99,
/// <summary>
/// Sets the drive to enter Standby mode
/// </summary>
Standby = 0xE2,
/// <summary>
/// Sets the drive to enter Standby mode
/// </summary>
StandbyAlternate = 0x96,
/// <summary>
/// Sets the drive to enter Standby mode, immediately
/// </summary>
StandbyImmediate = 0xE0,
/// <summary>
/// Sets the drive to enter Standby mode, immediately
/// </summary>
StandbyImmediateAlternate = 0x94,
/// <summary>
/// Writes sectors using PIO transfer
/// </summary>
Write = 0x31,
/// <summary>
/// Writes data to the drive's sector buffer
/// </summary>
WriteBuffer = 0xE8,
/// <summary>
/// Writes sectors using DMA transfer
/// </summary>
WriteDma = 0xCB,
/// <summary>
/// Writes sectors using DMA transfer, retrying on error
/// </summary>
WriteDmaRetry = 0xCA,
/// <summary>
/// Writes sectors with custom ECC
/// </summary>
WriteLong = 0x33,
/// <summary>
/// Writes sectors with custom ECC, retrying on error
/// </summary>
WriteLongRetry = 0x32,
/// <summary>
/// Writes several sectors at once setting interrupts on end of block
/// </summary>
WriteMultiple = 0xC5,
/// <summary>
/// Writes the same data to several sector
/// </summary>
WriteSame = 0xE9,
/// <summary>
/// Writes sectors using PIO transfer, retrying on error
/// </summary>
WriteRetry = 0x30,
/// <summary>
/// Writes sectors verifying them immediately after write
/// </summary>
WriteVerify = 0x3C,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_8x = 0x80,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_9A = 0x9A,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_C0 = 0xC0,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_C1 = 0xC1,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_C2 = 0xC2,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_C3 = 0xC3,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_F0 = 0xF0,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_F1 = 0xF1,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_F2 = 0xF2,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_F3 = 0xF3,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_F4 = 0xF4,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_F5 = 0xF5,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_F6 = 0xF6,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_F7 = 0xF7,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_F8 = 0xF8,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_F9 = 0xF9,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_FA = 0xFA,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_FB = 0xFB,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_FC = 0xFC,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_FD = 0xFD,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_FE = 0xFE,
/// <summary>
/// Unknown vendor command
/// </summary>
Vendor_FF = 0xFF,
#endregion Commands defined on ATA rev. 4c
#region Commands defined on ATA-2 rev. 4c
/// <summary>
/// Alters the device microcode
/// </summary>
DownloadMicrocode = 0x92,
/// <summary>
/// Ejects the removable medium on the device
/// </summary>
MediaEject = 0xED,
#endregion Commands defined on ATA-2 rev. 4c
#region Commands defined on ATA-3 rev. 7b
/// <summary>
/// Gets a sector containing drive identification and capabilities
/// </summary>
IdentifyDriveDma = 0xEE,
/// <summary>
/// Disables the security lock
/// </summary>
SecurityDisablePassword = 0xF6,
/// <summary>
/// Enables usage of <see cref="SecurityEraseUnit"/> command
/// </summary>
SecurityErasePrepare = 0xF3,
/// <summary>
/// Erases all user data and isables the security lock
/// </summary>
SecurityEraseUnit = 0xF4,
/// <summary>
/// Sets the security freeze lock preventing any security command from working until hardware reset
/// </summary>
SecurityFreezeLock = 0xF5,
/// <summary>
/// Sets the device user or master password
/// </summary>
SecuritySetPassword = 0xF1,
/// <summary>
/// Unlocks device
/// </summary>
SecurityUnlock = 0xF2,
/// <summary>
/// SMART operations
/// </summary>
Smart = 0xB0,
#endregion Commands defined on ATA-3 rev. 7b
#region Commands defined on CompactFlash Specification
/// <summary>
/// Pre-erases and conditions data sectors
/// </summary>
EraseSectors = 0xC0,
/// <summary>
/// Requests extended error information
/// </summary>
RequestSense = 0x03,
/// <summary>
/// Provides a way to determine the exact number of times a sector has been erases and programmed
/// </summary>
TranslateSector = 0x87,
/// <summary>
/// For CompactFlash cards that do not support security mode, this commands is equal to <see cref="Nop"/>
/// For those that do, this command is equal to <see cref="SecurityFreezeLock"/>
/// </summary>
WearLevel = 0xF5,
/// <summary>
/// Writes a block of sectors without erasing them previously
/// </summary>
WriteMultipleWithoutErase = 0xCD,
/// <summary>
/// Writes sectors without erasing them previously
/// </summary>
WriteWithoutErase = 0x38,
#endregion Commands defined on CompactFlash Specification
#region Commands defined on ATA/ATAPI-4 rev. 18
/// <summary>
/// Resets a device
/// </summary>
DeviceReset = 0x08,
/// <summary>
/// Requests the device to flush the write cache and write it to the media
/// </summary>
FlushCache = 0xE7,
/// <summary>
/// Gets media status
/// </summary>
GetMediaStatus = 0xDA,
/// <summary>
/// Gets a sector containing drive identification and capabilities, for ATA devices
/// </summary>
IdentifyDevice = IdentifyDrive,
/// <summary>
/// Gets a sector containing drive identification and capabilities, for ATAPI devices
/// </summary>
IdentifyPacketDevice = 0xA1,
/// <summary>
/// Locks the media on the device
/// </summary>
MediaLock = DoorLock,
/// <summary>
/// Unlocks the media on the device
/// </summary>
MediaUnLock = DoorUnLock,
/// <summary>
/// Sends a command packet
/// </summary>
Packet = 0xA0,
/// <summary>
/// Queues a read of sectors
/// </summary>
ReadDmaQueued = 0xC7,
/// <summary>
/// Returns the native maximum address in factory default condition
/// </summary>
ReadNativeMaxAddress = 0xF8,
/// <summary>
/// Used to provide data transfer and/or status of a previous command (queue or packet)
/// </summary>
Service = 0xA2,
/// <summary>
/// Redefines the maximum user-accessible address space
/// </summary>
SetMaxAddress = 0xF9,
/// <summary>
/// Queues a write of sectors
/// </summary>
WriteDmaQueued = 0xCC,
#endregion Commands defined on ATA/ATAPI-4 rev. 18
#region Commands defined on ATA/ATAPI-6 rev. 3b
/// <summary>
/// Determines if the device supports the Media Card Pass Through Command feature set
/// </summary>
CheckMediaCardType = 0xD1,
/// <summary>
/// Device Configuration Overlay feature set
/// </summary>
DevideConfiguration = 0xB1,
/// <summary>
/// Requests the device to flush the write cache and write it to the media (48-bit)
/// </summary>
FlushCacheExt = 0xEA,
/// <summary>
/// Reads sectors using DMA transfer, retrying on error (48-bit)
/// </summary>
ReadDmaExt = 0x25,
/// <summary> (48-bit)
/// Queues a read of sectors
/// </summary>
ReadDmaQueuedExt = 0x26,
/// <summary>
/// Reads sectors using PIO transfer, retrying on error (48-bit)
/// </summary>
ReadExt = 0x24,
/// <summary>
/// Returns the indicated log to the host (48-bit)
/// </summary>
ReadLogExt = 0x2F,
/// <summary>
/// Reads multiple sectors generating interrupts at block transfers (48-bit)
/// </summary>
ReadMultipleExt = 0x29,
/// <summary>
/// Returns the native maximum address in factory default condition (48-bit)
/// </summary>
ReadNativeMaxAddressExt = 0x27,
/// <summary>
/// Verifies sectors readability without transferring them, retrying on error (48-bit)
/// </summary>
ReadVerifyExt = 0x42,
/// <summary>
/// Sends a SET MAX subcommand, <see cref="AtaSetMaxSubCommands"/>
/// </summary>
SetMaxCommands = 0xF9,
/// <summary>
/// Redefines the maximum user-accessible address space (48-bit)
/// </summary>
SetMaxAddressExt = 0x37,
/// <summary>
/// Writes sectors using DMA transfer, retrying on error (48-bit)
/// </summary>
WriteDmaExt = 0x35,
/// <summary>
/// Queues a write of sectors (48-bit)
/// </summary>
WriteDmaQueuedExt = 0x36,
/// <summary>
/// Writes sectors using PIO transfer, retrying on error (48-bit)
/// </summary>
WriteExt = 0x34,
/// <summary>
/// Writes data to the indicated log (48-bit)
/// </summary>
WriteLogExt = 0x3F,
/// <summary>
/// Writes several sectors at once setting interrupts on end of block (48-bit)
/// </summary>
WriteMultipleExt = 0x39,
#endregion Commands defined on ATA/ATAPI-6 rev. 3b
#region Commands defined on ATA/ATAPI-7 rev. 4b
/// <summary>
/// Configurates the operating parameters for a stream
/// </summary>
ConfigureStream = 0x51,
/// <summary>
/// Reads data on an alloted time using DMA
/// </summary>
ReadStreamDmaExt = 0x2A,
/// <summary>
/// Reads data on an alloted time using PIO
/// </summary>
ReadStreamExt = 0x2B,
/// <summary>
/// Writes data on an alloted time using DMA
/// </summary>
WriteStreamDmaExt = 0x3A,
/// <summary>
/// Writes data on an alloted time using PIO
/// </summary>
WriteStreamExt = 0x3B,
#endregion Commands defined on ATA/ATAPI-7 rev. 4b
#region Commands defined on ATA/ATAPI-8 rev. 3f
/// <summary>
/// Sends a Non Volatile Cache subcommand. <see cref="AtaNonVolatileCacheSubCommands"/>
/// </summary>
NonVolatileCacheCommand = 0xB6,
/// <summary>
/// Retrieves security protocol information or the results from <see cref="TrustedSend"/> commands
/// </summary>
TrustedReceive = 0x5C,
/// <summary>
/// Retrieves security protocol information or the results from <see cref="TrustedSend"/> commands, using DMA transfers
/// </summary>
TrustedReceiveDma = 0x5D,
/// <summary>
/// Sends one or more Security Protocol commands
/// </summary>
TrustedSend = 0x5E,
/// <summary>
/// Sends one or more Security Protocol commands, using DMA transfers
/// </summary>
TrustedSendDma = 0x5F,
/// <summary>
/// Writes sectors using DMA transfer, retrying on error (48-bit), not returning until the operation is complete
/// </summary>
WriteDmaFuaExt = 0x3D,
/// <summary>
/// Queues a write of sectors (48-bit), not returning until the operation is complete
/// </summary>
WriteDmaQueuedFuaExt = 0x3E,
/// <summary>
/// Writes several sectors at once setting interrupts on end of block (48-bit), not returning until the operation is complete
/// </summary>
WriteMultipleFuaExt = 0xCE,
/// <summary>
/// Writes a sector that will give an uncorrectable error on any read operation
/// </summary>
WriteUncorrectableExt = 0x45,
#endregion Commands defined on ATA/ATAPI-8 rev. 3f
#region Commands defined on ATA/ATAPI Command Set 2 (ACS-2) rev. 2
/// <summary>
/// Provides information for device optimization
/// In SSDs, this contains trimming
/// </summary>
DataSetManagement = 0x06,
/// <summary>
/// Alters the device microcode, using DMA transfers
/// </summary>
DownloadMicrocodeDma = 0x93,
/// <summary>
/// Reads the content of the drive's buffer, using DMA transfers
/// </summary>
ReadBufferDma = 0xE9,
/// <summary>
/// Reads sectors using NCQ
/// </summary>
ReadFpDmaQueued = 0x60,
/// <summary>
/// Returns the indicated log to the host (48-bit)
/// </summary>
ReadLogDmaExt = 0x47,
/// <summary>
/// Requests SPC-4 style error data
/// </summary>
RequestSenseDataExt = 0x0B,
SanitizeCommands = 0xB4,
/// <summary>
/// Executes a Security Protocol command that does not require a transfer of data
/// </summary>
TrustedNonData = 0x5B,
/// <summary>
/// Writes data to the drive's sector buffer, using DMA transfers
/// </summary>
WriteBufferDma = 0xE8,
/// <summary>
/// Writes sectors using NCQ
/// </summary>
WriteFpDmaQueued = 0x61,
#endregion Commands defined on ATA/ATAPI Command Set 2 (ACS-2) rev. 2
#region Commands defined on ATA/ATAPI Command Set 3 (ACS-3) rev. 5
/// <summary>
/// Sends <see cref="AtaNCQQueueManagementSubcommands"/>
/// </summary>
NCQQueueManagement = 0x63,
/// <summary>
/// Sets the device date and time
/// </summary>
SetDateAndTimeExt = 0x77
#endregion Commands defined on ATA/ATAPI Command Set 3 (ACS-3) rev. 5
}
#endregion ATA Commands
#region ATA SMART SubCommands
public enum AtaSmartSubCommands : byte
{
#region Commands defined on ATA-3 rev. 7b
/// <summary>
/// Disables all SMART capabilities
/// </summary>
Disable = 0xD9,
/// <summary>
/// Enables/disables SMART attribute autosaving
/// </summary>
EnableDisableAttributeAutosave = 0xD2,
/// <summary>
/// Enables all SMART capabilities
/// </summary>
Enable = 0xD8,
/// <summary>
/// Returns the device's SMART attributes thresholds
/// </summary>
ReadAttributeThresholds = 0xD1,
/// <summary>
/// Returns the device's SMART attributes values
/// </summary>
ReadAttributeValues = 0xD0,
/// <summary>
/// Communicates device reliability status
/// </summary>
ReturnStatus = 0xDA,
/// <summary>
/// Saves any attribute values immediately
/// </summary>
SaveAttributeValues = 0xD3,
#endregion Commands defined on ATA-3 rev. 7b
#region Commands defined on ATA/ATAPI-4 rev. 18
/// <summary>
/// Causes the device to immediately initiate a SMART data collection and saves it to the device
/// </summary>
ExecuteOfflineImmediate = 0xD4,
/// <summary>
/// Returns the device's SMART attributes values
/// </summary>
ReadData = ReadAttributeValues,
#endregion Commands defined on ATA/ATAPI-4 rev. 18
#region Commands defined on ATA/ATAPI-5 rev. 3
/// <summary>
/// Returns the indicated log to the host
/// </summary>
ReadLog = 0xD5,
/// <summary>
/// Writes data to the indicated log
/// </summary>
WriteLog = 0xD6
#endregion Commands defined on ATA/ATAPI-5 rev. 3
}
#endregion ATA SMART SubCommands
#region ATA Device Configuration Overlay SubCommands
public enum AtaDeviceConfigurationSubCommands : byte
{
#region Commands defined on ATA/ATAPI-6 rev. 3b
/// <summary>
/// Disables any change made by <see cref="Set"/>
/// </summary>
Restore = 0xC0,
/// <summary>
/// Prevents any <see cref="AtaDeviceConfigurationSubCommands"/> from working until a power down cycle.
/// </summary>
FreezeLock = 0xC1,
/// <summary>
/// Indicates the selectable commands, modes, and feature sets the device supports
/// </summary>
Identify = 0xC2,
/// <summary>
/// Modifies the commands, modes and features sets the device will obey to
/// </summary>
Set = 0xC3
#endregion Commands defined on ATA/ATAPI-6 rev. 3b
}
#endregion ATA Device Configuration Overlay SubCommands
#region ATA SET MAX SubCommands
public enum AtaSetMaxSubCommands : byte
{
#region Commands defined on ATA/ATAPI-6 rev. 3b
/// <summary>
/// Redefines the maximum user-accessible address space
/// </summary>
Address = 0x00,
/// <summary>
/// Disables any other <see cref="AtaSetMaxSubCommands"/> until power cycle
/// </summary>
FreezeLock = 0x04,
/// <summary>
/// Disables any other <see cref="AtaSetMaxSubCommands"/> except <see cref="UnLock"/> and <see cref="FreezeLock"/> until power cycle
/// </summary>
Lock = 0x02,
/// <summary>
/// Sets the device password
/// </summary>
SetPassword = 0x01,
/// <summary>
/// Disables <see cref="Lock"/>
/// </summary>
UnLock = 0x03,
#endregion Commands defined on ATA/ATAPI-6 rev. 3b
}
#endregion ATA SET MAX SubCommands
#region ATA Non Volatile Cache SubCommands
public enum AtaNonVolatileCacheSubCommands : byte
{
#region Commands defined on ATA/ATAPI-8 rev. 3f
/// <summary>
/// Adds the specified LBA to the Non Volatile Cache
/// </summary>
AddLbaToNvCache = 0x10,
/// <summary>
/// Ensures there is enough free space in the Non Volatile Cache
/// </summary>
FlushNvCache = 0x14,
/// <summary>
/// Requests a list of LBAs actually stored in the Non Volatile Cache
/// </summary>
QueryNvCachePinnedSet = 0x12,
/// <summary>
/// Requests a list of LBAs accessed but not in the Non Volatile Cache
/// </summary>
QueryNvCacheMisses = 0x13,
/// <summary>
/// Removes the specified LBA from the Non Volatile Cache Pinned Set
/// </summary>
RemoveLbaFromNvCache = 0x11,
/// <summary>
/// Disables the Non Volatile Cache Power Mode
/// <see cref="SetNvCachePowerMode"/>
/// </summary>
ReturnFromNvCachePowerMode = 0x01,
/// <summary>
/// Enables the Non Volatile Cache Power Mode, so the device tries to serve all accesses from the Non Volatile Cache
/// </summary>
SetNvCachePowerMode = 0x00
#endregion Commands defined on ATA/ATAPI-8 rev. 3f
}
#endregion ATA Non Volatile Cache SubCommands
#region ATA Sanitize SubCommands
public enum AtaSanitizeSubCommands : ushort
{
#region Commands defined on ATA/ATAPI Command Set 2 (ACS-2) rev. 2
/// <summary>
/// Causes a block erase on all user data
/// </summary>
BlockEraseExt = 0x0012,
/// <summary>
/// Changes the internal encryption keys. Renders user data unusable
/// </summary>
CryptoScrambleExt = 0x0011,
/// <summary>
/// Fills user data with specified pattern
/// </summary>
OverwriteExt = 0x0014,
/// <summary>
/// Disables all <see cref="AtaSanitizeSubCommands"/> except <see cref="Status"/>
/// </summary>
FreezeLockExt = 0x0020,
/// <summary>
/// Gets the status of the sanitizing
/// </summary>
Status = 0x0000,
#endregion Commands defined on ATA/ATAPI Command Set 2 (ACS-2) rev. 2
#region Commands defined on ATA/ATAPI Command Set 3 (ACS-3) rev. 5
/// <summary>
/// Disables the <see cref="FreezeLockExt"/> command
/// </summary>
AntiFreezeLockExt = 0x0040
#endregion Commands defined on ATA/ATAPI Command Set 3 (ACS-3) rev. 5
}
#endregion ATA Sanitize SubCommands
#region ATA NCQ Queue Management SubCommands
public enum AtaNCQQueueManagementSubcommands : byte
{
#region Commands defined on ATA/ATAPI Command Set 3 (ACS-3) rev. 5
/// <summary>
/// Aborts pending NCQ commands
/// </summary>
AbortNCQQueue = 0x00,
/// <summary>
/// Controls how NCQ Streaming commands are processed by the device
/// </summary>
DeadlineHandling = 0x01,
#endregion Commands defined on ATA/ATAPI Command Set 3 (ACS-3) rev. 5
}
#endregion ATA NCQ Queue Management SubCommands
/// <summary>
/// SASI commands
/// Commands 0x00 to 0x1F are 6-byte
/// Commands 0x20 to 0x3F are 10-byte
/// Commands 0x40 to 0x5F are 8-byte
/// </summary>
#region SASI Commands
public enum SasiCommands : byte
{
#region SASI Class 0 commands
/// <summary>
/// Returns zero status if requested unit is on and ready.
/// SASI rev. 0a
/// </summary>
TestUnitReady = 0x00,
/// <summary>
/// Sets the unit to a specific known state.
/// SASI rev. 0a
/// </summary>
RezeroUnit = 0x01,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
RequestSyndrome = 0x02,
/// <summary>
/// Returns unit sense.
/// SASI rev. 0a
/// </summary>
RequestSense = 0x03,
/// <summary>
/// Formats the entire media.
/// SASI rev. 0a
/// </summary>
FormatUnit = 0x04,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
CheckTrackFormat = 0x05,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
FormatTrack = 0x06,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
FormatBadTrack = 0x06,
/// <summary>
/// Reads a block from the device.
/// SASI rev. 0a
/// </summary>
Read = 0x08,
/// <summary>
/// SASI rev. 0a
/// Unknown
/// </summary>
WriteProtectSector = 0x09,
/// <summary>
/// Writes a block to the device.
/// SASI rev. 0a
/// </summary>
Write = 0x0A,
/// <summary>
/// Moves the device reading mechanism to the specified block.
/// SASI rev. 0a
/// </summary>
Seek = 0x0B,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
VerifyRestore = 0x0D,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
AssignAlternateDiskTrack = 0x0E,
/// <summary>
/// Writes a File Mark on the device.
/// SASI rev. 0c
/// </summary>
WriteFileMark = 0x0F,
/// <summary>
/// Reserves the device for use by the iniator.
/// SASI rev. 0a
/// </summary>
ReserveUnit = 0x12,
/// <summary>
/// Release the device from the reservation.
/// SASI rev. 0a
/// </summary>
ReleaseUnit= 0x13,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
WriteProtectDrive = 0x14,
/// <summary>
/// Writes and verifies blocks to the device.
/// SASI rev. 0c
/// </summary>
WriteVerify = 0x14,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
ReleaseWriteProtect = 0x15,
/// <summary>
/// Verifies blocks.
/// SASI rev. 0c
/// </summary>
Verify = 0x15,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
ReadNoSeek = 0x16,
/// <summary>
/// Gets the number of blocks in device.
/// SASI rev. 0c
/// </summary>
ReadCapacity = 0x16,
/// <summary>
/// Searches data on blocks
/// SASI rev. 0a
/// </summary>
SearchDataEqual = 0x17,
/// <summary>
/// Searches data on blocks using major than or equal comparison
/// SASI rev. 0a
/// </summary>
SearchDataHigh = 0x18,
/// <summary>
/// Searches data on blocks using minor than or equal comparison
/// SASI rev. 0a
/// </summary>
SearchDataLow = 0x19,
/// <summary>
/// Reads analysis data from a device
/// SASI rev. 0a
/// </summary>
ReadDiagnostic = 0x1A,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
VerifyData = 0x1B,
/// <summary>
/// Requests a device to run a diagnostic
/// SASI rev. 0c
/// </summary>
WriteDiagnostic = 0x1B,
/// <summary>
/// Gets information about a device
/// SASI rev. 0c
/// </summary>
Inquiry = 0x1F,
#endregion SASI Class 0 commands
#region SASI Class 1 commands
/// <summary>
/// SASI rev. 0a
/// Unknown
/// </summary>
Copy = 0x20,
/// <summary>
/// SASI rev. 0a
/// Unknown
/// </summary>
Restore = 0x21,
/// <summary>
/// SASI rev. 0a
/// Unknown
/// </summary>
Backup = 0x22,
/// <summary>
/// SASI rev. 0a
/// Unknown
/// </summary>
SetBlockLimitsOld = 0x26,
/// <summary>
/// Sets write or read limits from a specified block
/// SASI rev. 0c
/// </summary>
SetBlockLimits = 0x28,
#endregion SASI Class 1 commands
#region SASI Class 2 commands
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
Load = 0x40,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
Unload = 0x41,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
Rewind = 0x42,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
SpaceForward = 0x43,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
SpaceForwardFileMark = 0x44,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
SpaceReserve = 0x45,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
SpaceReserveFileMark = 0x46,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
TrackSelect = 0x47,
/// <summary>
/// Reads blocks from device
/// SASI rev. 0a
/// </summary>
Read10 = 0x48,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
ReadVerify = 0x49,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
ReadDiagnosticClass2 = 0x4A,
/// <summary>
/// Writes blocks to device
/// SASI rev. 0a
/// </summary>
Write10 = 0x4B,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
WriteFileMarkClass2 = 0x4C,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
WriteExtended = 0x4D,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
WriteExtendedFileMark = 0x4E,
/// <summary>
/// Unknown
/// SASI rev. 0a
/// </summary>
WriteErase = 0x4F,
#endregion SASI Class 2 commands
#region SASI Class 3 commands
/// <summary>
/// SASI rev. 0a
/// </summary>
Skip = 0x60,
/// <summary>
/// SASI rev. 0a
/// </summary>
Space = 0x61,
/// <summary>
/// SASI rev. 0a
/// </summary>
Return = 0x62,
/// <summary>
/// SASI rev. 0a
/// </summary>
Tab = 0x63,
/// <summary>
/// SASI rev. 0a
/// </summary>
ReadControl = 0x64,
/// <summary>
/// SASI rev. 0a
/// </summary>
Write3 = 0x65,
/// <summary>
/// SASI rev. 0a
/// </summary>
WriteControl = 0x66,
#endregion SASI Class 3 commands
#region SASI Class 6 commands
/// <summary>
/// SASI rev. 0a
/// </summary>
DefineFloppyDiskTracFormat = 0xC0,
/// <summary>
/// SASI rev. 0a
/// </summary>
FormatDriveErrorMap = 0xC4,
/// <summary>
/// SASI rev. 0a
/// </summary>
ReadErrorMap = 0xC5,
/// <summary>
/// SASI rev. 0a
/// </summary>
ReadDriveType = 0xC6,
#endregion SASI Class 6 commands
#region SASI Class 7 commands
/// <summary>
/// SASI rev. 0a
/// </summary>
RamDiagnostic = 0xE0,
/// <summary>
/// SASI rev. 0a
/// </summary>
WriteECC = 0xE1,
/// <summary>
/// SASI rev. 0a
/// </summary>
ReadID = 0xE2,
/// <summary>
/// SASI rev. 0a
/// </summary>
DriveDiagnostic = 0xE3
#endregion SASI Class 7 commands
}
#endregion SASI Commands
#region SCSI Commands
public enum ScsiCommands : byte
{
#region SCSI Primary Commands (SPC)
/// <summary>
/// Commands used to obtain information about the access controls that are active
/// SPC-4 rev. 16
/// </summary>
AccessControlIn = 0x86,
/// <summary>
/// Commands used to limit or grant access to LUNs
/// SPC-4 rev. 16
/// </summary>
AccessControlOut = 0x87,
/// <summary>
/// Modifies the operating definition of the device with respect to commmands.
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ChangeDefinition = 0x40,
/// <summary>
/// Compares data between two devices
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Compare = 0x39,
/// <summary>
/// Copies data between two devices
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Copy = 0x18,
/// <summary>
/// Copies data between two devices and verifies the copy is correct.
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
CopyAndVerify = 0x3A,
/// <summary>
/// Copies data between two devices
/// SPC-2 rev. 20
/// </summary>
ExtendedCopy = 0x83,
/// <summary>
/// Requests information about the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Inquiry = 0x12,
/// <summary>
/// Manages device statistics
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
LogSelect = 0x4C,
/// <summary>
/// Gets device statistics
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
LogSense = 0x4D,
/// <summary>
/// Retrieves management protocol information
/// SPC-2 rev. 20
/// </summary>
ManagementProtocolIn = 0xA3,
/// <summary>
/// Transfers management protocol information
/// SPC-2 rev. 20
/// </summary>
ManagementProtocolOut = 0xA4,
/// <summary>
/// Sets device parameters
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ModeSelect = 0x15,
/// <summary>
/// Sets device parameters
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ModeSelect10 = 0x55,
/// <summary>
/// Gets device parameters
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ModeSense = 0x1A,
/// <summary>
/// Gets device parameters
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ModeSense10 = 0x5A,
/// <summary>
/// Obtains information about persistent reservations and reservation keys
/// SPC-1 rev. 10
/// </summary>
PersistentReserveIn = 0x5E,
/// <summary>
/// Reserves a LUN or an extent within a LUN for exclusive or shared use
/// SPC-1 rev. 10
/// </summary>
PersistentReserveOut = 0x5F,
/// <summary>
/// Requests the device to disable or enable the removal of the medium inside it
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
PreventAllowMediumRemoval = 0x1E,
/// <summary>
/// Reads attribute values from medium auxiliary memory
/// SPC-3 rev. 21b
/// </summary>
ReadAttribute = 0x8C,
/// <summary>
/// Reads the device buffer
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReadBuffer = 0x3C,
/// <summary>
/// Reads the media serial number
/// SPC-3 rev. 21b
/// </summary>
ReadSerialNumber = 0xAB,
/// <summary>
/// Receives information about a previous or current <see cref="ExtendedCopy"/>
/// SPC-2 rev. 20
/// </summary>
ReceiveCopyResults = 0x84,
/// <summary>
/// Requests the data after completion of a <see cref="SendDiagnostic"/>
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReceiveDiagnostic = 0x1C,
/// <summary>
/// Releases a previously reserved LUN or extents
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Release = 0x17,
/// <summary>
/// Releases a previously reserved LUN or extents
/// SPC-1 rev. 10
/// </summary>
Release10 = 0x57,
/// <summary>
/// Requests the LUNs that are present on the device
/// SPC-1 rev. 10
/// </summary>
ReportLuns = 0xA0,
/// <summary>
/// Requests the device's sense
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
RequestSense = 0x03,
/// <summary>
/// Reserves a LUN or extent
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Reserve = 0x16,
/// <summary>
/// Reserves a LUN or extent
/// SPC-1 rev. 10
/// </summary>
Reserve10 = 0x56,
/// <summary>
/// Retrieves security protocol information
/// SPC-4 rev. 16
/// </summary>
SecurityProtocolIn = 0xA2,
/// <summary>
/// Transfers security protocol information
/// SPC-4 rev. 16
/// </summary>
SecurityProtocolOut = 0xB5,
/// <summary>
/// Requests the device to perform diagnostics
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SendDiagnostic = 0x1D,
/// <summary>
/// Extended commands
/// SPC-4
/// </summary>
ServiceActionIn = 0x9E,
/// <summary>
/// Extended commands
/// SPC-4
/// </summary>
ServiceActionOut = 0x9F,
/// <summary>
/// Checks if a LUN is ready to access its medium
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
TestUnitReady = 0x00,
/// <summary>
/// Writes attribute values to medium auxiliary memory
/// SPC-3 rev. 21b
/// </summary>
WriteAttribute = 0x8C,
/// <summary>
/// Writes to the device's buffer
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
WriteBuffer = 0x3B,
#endregion SCSI Primary Commands (SPC)
#region SCSI Block Commands (SBC)
/// <summary>
/// Compares blocks with sent data, and if equal, writes those block to device, atomically
/// SBC-3 rev. 25
/// </summary>
CompareAndWrite = 0x89,
/// <summary>
/// Formats the medium into addressable logical blocks
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
FormatUnit = 0x04,
/// <summary>
/// Locks blocks from eviction of device's cache
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
LockUnlockCache = 0x36,
/// <summary>
/// Locks blocks from eviction of device's cache
/// SBC-2 rev. 4
/// </summary>
LockUnlockCache16 = 0x92,
/// <summary>
/// Requests the device to perform the following uninterrupted series of actions:
/// 1.- Read the specified blocks
/// 2.- Transfer blocks from the data out buffer
/// 3.- Perform an OR operation between the read blocks and the buffer
/// 4.- Write the buffer to the blocks
/// SBC-3 rev. 16
/// </summary>
ORWrite = 0x8B,
/// <summary>
/// Transfers requested blocks to devices' cache
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
PreFetch = 0x34,
/// <summary>
/// Transfers requested blocks to devices' cache
/// SBC-3 rev. 16
/// </summary>
PreFetch16 = 0x90,
/// <summary>
/// Reads blocks from device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Read = 0x08,
/// <summary>
/// Reads blocks from device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Read10 = 0x28,
/// <summary>
/// Reads blocks from device
/// SBC-2 rev. 4
/// </summary>
Read16 = 0x88,
/// <summary>
/// Gets device capacity
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReadCapacity = 0x25,
/// <summary>
/// Gets device's defect data
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReadDefectData = 0x37,
/// <summary>
/// Reads blocks from device in a vendor-specific way that should include the ECC alongside the data
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReadLong = 0x3E,
/// <summary>
/// Requests the device to reassign the defective blocks to another area of the medium
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReassignBlocks = 0x07,
/// <summary>
/// Requests the target write to the medium the XOR data generated from the specified source devices
/// SBC-1 rev. 8c
/// </summary>
Rebuild = 0x81,
/// <summary>
/// Requests the target write to the buffer the XOR data from its own medium and the specified source devices
/// SBC-1 rev. 8c
/// </summary>
Regenerate = 0x82,
/// <summary>
/// Requests the device to set the LUN in a vendor specific state
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
RezeroUnit = 0x01,
/// <summary>
/// Searches data on blocks
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SearchDataEqual = 0x31,
/// <summary>
/// Searches data on blocks using major than or equal comparison
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SearchDataHigh = 0x30,
/// <summary>
/// Searches data on blocks using minor than or equal comparison
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SearchDataLow = 0x32,
/// <summary>
/// Requests the device to seek to a specified blocks
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Seek = 0x0B,
/// <summary>
/// Requests the device to seek to a specified blocks
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Seek10 = 0x2B,
/// <summary>
/// Defines the range within which subsequent linked commands may operate
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SetLimits = 0x33,
/// <summary>
/// Requests the device to enable or disable the LUN for media access operations
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
StartStopUnit = 0x1B,
/// <summary>
/// Ensures that the blocks in the cache are written to the medium
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SynchronizeCache = 0x35,
/// <summary>
/// Ensures that the blocks in the cache are written to the medium
/// SBC-2 rev. 4
/// </summary>
SynchronizeCache16 = 0x91,
/// <summary>
/// Unmaps one or more LBAs
/// In SSDs, this is trimming
/// SBC-3 rev. 25
/// </summary>
Unmap = 0x42,
/// <summary>
/// Verifies blocks on the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Verify10 = 0x2F,
/// <summary>
/// Verifies blocks on the device
/// SBC-2 rev. 4
/// </summary>
Verify16 = 0x8F,
/// <summary>
/// Writes blocks to the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Write = 0x0A,
/// <summary>
/// Writes blocks to the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Write10 = 0x2A,
/// <summary>
/// Writes blocks to the device
/// SBC-2 rev. 4
/// </summary>
Write16 = 0x8A,
/// <summary>
/// Writes blocks to the device and then verifies them
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
WriteAndVerify = 0x2E,
/// <summary>
/// Writes blocks to the device and then verifies them
/// SBC-2 rev. 4
/// </summary>
WriteAndVerify16 = 0x8E,
/// <summary>
/// Writes blocks to the device with a vendor specified format that shall include the ECC alongside the data
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
WriteLong = 0x3F,
/// <summary>
/// Writes a single block several times
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
WriteSame = 0x41,
/// <summary>
/// Writes a single block several times
/// SBC-2 rev. 4
/// </summary>
WriteSame16 = 0x93,
/// <summary>
/// Requets XOR data generated by an <see cref="XDWrite"/> or <see cref="Regenerate"/> command
/// SBC-1 rev. 8c
/// </summary>
XDRead = 0x52,
/// <summary>
/// XORs the data sent with data on the medium and stores it until an <see cref="XDRead"/> is issued
/// SBC-1 rev. 8c
/// </summary>
XDWrite = 0x50,
/// <summary>
/// XORs the data sent with data on the medium and stores it until an <see cref="XDRead"/> is issued
/// SBC-1 rev. 8c
/// </summary>
XDWrite16 = 0x80,
/// <summary>
/// Requets the target to XOR the sent data with the data on the medium and return the results
/// </summary>
XDWriteRead = 0x53,
/// <summary>
/// Requests the target to XOR the data transferred with the data on the medium and writes it to the medium
/// SBC-1 rev. 8c
/// </summary>
XPWrite = 0x51,
#endregion SCSI Block Commands (SBC)
#region SCSI Streaming Commands (SSC)
/// <summary>
/// Prepares the medium for use by the LUN
/// SSC-1 rev. 22
/// </summary>
FormatMedium = 0x04,
/// <summary>
/// Erases part of all of the medium from the current position
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Erase = 0x19,
/// <summary>
/// Enables or disables the LUN for further operations
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
LoadUnload = 0x1B,
/// <summary>
/// Positions the LUN to a specified block in a specified partition
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Locate = 0x2B,
/// <summary>
/// Positions the LUN to a specified block in a specified partition
/// SSC-2 rev. 09
/// </summary>
Locate16 = 0x92,
/// <summary>
/// Requests the block length limits capability
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReadBlockLimits = 0x05,
/// <summary>
/// Reads the current position
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReadPosition = 0x34,
/// <summary>
/// Reads blocks from the device, in reverse order
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReadReverse = 0x0F,
/// <summary>
/// Retrieves data from the device buffer that has not been successfully written to the medium (or printed)
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
RecoverBufferedData = 0x14,
/// <summary>
/// Requests information regarding the supported densities for the logical unit
/// SSC-1 rev. 22
/// </summary>
ReportDensitySupport = 0x44,
/// <summary>
/// Seeks the medium to the beginning of partition in current partition
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Rewind = 0x01,
/// <summary>
/// A variety of positioning functions
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Space = 0x11,
/// <summary>
/// A variety of positioning functions
/// SSC-2 rev. 09
/// </summary>
Space16 = 0x91,
/// <summary>
/// Verifies one or more blocks from the next one
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Verify = 0x13,
/// <summary>
/// Writes the specified number of filemarks or setmarks in the current position
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
WriteFileMarks=0x10,
#endregion SCSI Streaming Commands (SSC)
#region SCSI Streaming Commands for Printers (SSC)
/// <summary>
/// Specifies forms or fronts
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Format = 0x04,
/// <summary>
/// Transfers data to be printed
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Print = 0x0A,
/// <summary>
/// Transfers data to be printed with a slew value
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SlewAndPrint = 0x0B,
/// <summary>
/// Halts printing
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
StopPrint = 0x1B,
/// <summary>
/// Assures that the data in the buffer has been printed, or, for other devices, written to media
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SynchronizeBuffer = 0x10,
#endregion SCSI Streaming Commands for Printers (SSC)
#region SCSI Processor Commands
/// <summary>
/// Transfers data from the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Receive = 0x08,
/// <summary>
/// Sends data to the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Send = 0x0A,
#endregion SCSI Processor Commands
#region SCSI Multimedia Commands (MMC)
/// <summary>
/// Erases any part of a CD-RW
/// MMC-1 rev. 9
/// </summary>
Blank = 0xA1,
/// <summary>
/// Closes a track or session
/// MMC-1 rev. 9
/// </summary>
CloseTrackSession = 0x5B,
/// <summary>
/// Gets information about the overall capabilities of the device and the current capabilities of the device
/// MMC-2 rev. 11a
/// </summary>
GetConfiguration = 0x46,
/// <summary>
/// Requests the LUN to report events and statuses
/// MMC-2 rev. 11a
/// </summary>
GetEventStatusNotification = 0x4A,
/// <summary>
/// Provides a mehotd to profile the performance of the drive
/// MMC-2 rev. 11a
/// </summary>
GetPerformance = 0xAC,
/// <summary>
/// Requests the device changer to load or unload a disc
/// MMC-1 rev. 9
/// </summary>
LoadUnloadCd = 0xA6,
/// <summary>
/// Requests the device changer to load or unload a disc
/// MMC-2 rev. 11a
/// </summary>
LoadUnloadMedium = 0xA6,
/// <summary>
/// Requests information about the current status of the CD device, including any changer mechanism
/// MMC-1 rev. 9
/// </summary>
MechanicalStatus = 0xBD,
/// <summary>
/// Requests the device to start or stop an audio play operation
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
PauseResume = 0x4B,
/// <summary>
/// Begins an audio playback
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
PlayAudio = 0x45,
/// <summary>
/// Begins an audio playback
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
PlayAudio12 = 0xA5,
/// <summary>
/// Begins an audio playback using MSF addressing
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
PlayAudioMsf = 0x47,
/// <summary>
/// Begins an audio playback from the specified index of the specified track
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
PlayAudioTrackIndex = 0x48,
/// <summary>
/// Begins an audio playback from the position relative of a track
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
PlayTrackRelative = 0x49,
/// <summary>
/// Begins an audio playback from the position relative of a track
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
PlayTrackRelative12 = 0xA9,
/// <summary>
/// Reports the total and blank area of the device buffer
/// MMC-1 rev. 9
/// </summary>
ReadBufferCapacity = 0x5C,
/// <summary>
/// Reads a block from a CD with any of the requested CD data streams
/// MMC-1 rev. 9
/// </summary>
ReadCd = 0xBE,
/// <summary>
/// Reads a block from a CD with any of the requested CD data streams using MSF addressing
/// MMC-1 rev. 9
/// </summary>
ReadCdMsf = 0xB9,
/// <summary>
/// Returns the recorded size of the CD
/// MMC-1 rev. 9
/// </summary>
ReadCdRecordedCapacity = 0x25,
/// <summary>
/// Gets informationn about all discs: CD-ROM, CD-R and CD-RW
/// MMC-1 rev. 9
/// </summary>
ReadDiscInformation = 0x51,
/// <summary>
/// Reads areas from the DVD or BD media
/// MMC-5 rev. 2c
/// </summary>
ReadDiscStructure = 0xAD,
/// <summary>
/// Reads areas from the DVD media
/// MMC-2 rev. 11a
/// </summary>
ReadDvdStructure = 0xAD,
/// <summary>
/// Requests a list of the possible format capacities for an installed random-writable media
/// MMC-2 rev. 11a
/// </summary>
ReadFormatCapacities = 0x23,
/// <summary>
/// Reads the data block header of the specified CD-ROM block
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReadHeader = 0x44,
/// <summary>
/// Reads the mastering information from a Master CD.
/// MMC-1 rev. 9
/// </summary>
ReadMasterCue = 0x59,
/// <summary>
/// Requests the Q subchannel and the current audio playback status
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReadSubChannel = 0x42,
/// <summary>
/// Requests the medium TOC, PMA or ATIP from the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReadTocPmaAtip = 0x43,
/// <summary>
/// Gets information about a track regardless of its status
/// MMC-1 rev. 9
/// </summary>
ReadTrackInformation = 0x52,
/// <summary>
/// Repairs an incomplete ECC block at the end of an RZone
/// Mt. Fuji ver. 7 rev. 1.21
/// </summary>
RepairRZone = 0x58,
/// <summary>
/// Repairs an incomplete packet at the end of a packet writing track
/// MMC-1 rev. 9
/// </summary>
RepairTrack = 0x58,
/// <summary>
/// Requests the start of the authentication process and provides data necessary for authentication and for generating a Bus Key
/// MMC-2 rev. 11a
/// </summary>
ReportKey = 0xA4,
/// <summary>
/// Reserves disc space for a track
/// MMC-1 rev. 9
/// </summary>
ReserveTrack = 0x53,
/// <summary>
/// Fast-forwards or fast-reverses the audio playback to the specified block. Stops if it encounters a data track
/// MMC-1 rev. 9
/// </summary>
ScanMmc = 0xBA,
/// <summary>
/// Sends a cue sheet for session-at-once recording
/// MMC-1 rev. 9
/// </summary>
SendCueSheet = 0x5D,
/// <summary>
/// Transfer a DVD or BD structure for media writing
/// MMC-5 rev. 2c
/// </summary>
SendDiscStructure = 0xAD,
/// <summary>
/// Transfer a DVD structure for media writing
/// MMC-2 rev. 11a
/// </summary>
SendDvdStructure = 0xAD,
/// <summary>
/// Requests the LUN to process an event
/// MMC-2 rev. 11a
/// </summary>
SendEvent = 0xA2,
/// <summary>
/// Provides data necessary for authentication and for generating a Bus Key
/// MMC-2 rev. 11a
/// </summary>
SendKey = 0xA3,
/// <summary>
/// Restores the Optimum Power Calibration values to the drive for a specific disc
/// MMC-1 rev. 9
/// </summary>
SendOpcInformation = 0x54,
/// <summary>
/// Sets the spindle speed to be used while reading/writing data to a CD
/// MMC-1 rev. 9
/// </summary>
SetCdRomSpeed = 0xBB,
/// <summary>
/// Requests the LUN to perform read ahead caching operations from the specified block
/// MMC-2 rev. 11a
/// </summary>
SetReadAhead = 0xA7,
/// <summary>
/// Indicates the LUN to try to achieve a specified performance
/// MMC-2 rev. 11a
/// </summary>
SetStreaming = 0xB6,
/// <summary>
/// Stops a scan and continues audio playback from current scanning position
/// MMC-1 rev. 9
/// </summary>
StopPlayScan = 0x4E,
#endregion SCSI Multimedia Commands (MMC)
#region SCSI Scanner Commands
/// <summary>
/// Gets information about the data buffer
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
GetDataBufferStatus = 0x34,
/// <summary>
/// Gets information about previously defined windows
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
GetWindow = 0x25,
/// <summary>
/// Provides positioning functions
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ObjectPosition = 0x31,
/// <summary>
/// Begins a scan operation
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Scan = 0x1B,
/// <summary>
/// Specifies one or more windows within the device's scanning range
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SetWindow = 0x24,
/// <summary>
/// Sends data to the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Send10 = 0x2A,
#endregion SCSI Scanner Commands
#region SCSI Block Commands for Optical Media (SBC)
/// <summary>
/// Erases the specified number of blocks
/// </summary>
Erase10 = 0x2C,
/// <summary>
/// Erases the specified number of blocks
/// </summary>
Erase12 = 0xAC,
/// <summary>
/// Searches the medium for a contiguos set of written or blank blocks
/// </summary>
MediumScan = 0x38,
/// <summary>
/// Reads blocks from device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Read12 = 0xA8,
/// <summary>
/// Gets medium's defect data
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReadDefectData12 = 0xB7,
/// <summary>
/// Gets the maxium generation address for the specified block
/// </summary>
ReadGeneration = 0x29,
/// <summary>
/// Reads a specified generation of a specified block
/// </summary>
ReadUpdatedBlock = 0x2D,
/// <summary>
/// Searches data on blocks
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SearchDataEqual12 = 0xB1,
/// <summary>
/// Searches data on blocks using major than or equal comparison
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SearchDataHigh12 = 0xB0,
/// <summary>
/// Searches data on blocks using minor than or equal comparison
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SearchDataLow12 = 0xB2,
/// <summary>
/// Defines the range within which subsequent linked commands may operate
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SetLimits12 = 0xB3,
/// <summary>
/// Replaces a block with data
/// </summary>
UpdateBlock = 0x3D,
/// <summary>
/// Verifies blocks on the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Verify12 = 0xAF,
/// <summary>
/// Writes blocks to the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
Write12 = 0xAA,
/// <summary>
/// Writes blocks to the device and then verifies them
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
WriteAndVerify12 = 0xAE,
#endregion SCSI Block Commands for Optical Media (SBC)
#region SCSI Medium Changer Commands (SMC)
/// <summary>
/// Provides a means to exchange the medium in the source element with the medium at destination element
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ExchangeMedium = 0xA6,
/// <summary>
/// Checks all elements for medium and any other relevant status
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
InitializeElementStatus = 0x07,
/// <summary>
/// Checks all elements for medium and any other relevant status in the specified range of elements
/// SMC-2 rev. 7
/// </summary>
InitializeElementStatusWithRange = 0x37,
/// <summary>
/// Moves a medium from an element to another
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
MoveMedium = 0xA5,
/// <summary>
/// Moves a medium that's currently attached to another element
/// SPC-1 rev. 10
/// </summary>
MoveMediumAttached = 0xA7,
/// <summary>
/// Provides a method to change the open/closed state of the specified import/export element
/// SMC-3 rev. 12
/// </summary>
OpenCloseImportExportElement = 0x1B,
/// <summary>
/// Positions the transport element in front of the destination element
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
PositionToElement = 0x2B,
/// <summary>
/// Requests the status of the elements
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReadElementStatus = 0xB8,
/// <summary>
/// Requests the status of the attached element
/// SPC-1 rev. 10
/// </summary>
ReadElementStatusAttached = 0xB4,
/// <summary>
/// Releases a reserved LUN
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReleaseElement = 0x17,
/// <summary>
/// Releases a reserved LUN
/// SMC-1 rev. 10a
/// </summary>
ReleaseElement10 = 0x57,
/// <summary>
/// Requests information regarding the supported volume types for the device
/// SMC-3 rev. 12
/// </summary>
ReportVolumeTypesSupported = 0x44,
/// <summary>
/// Gets the results of <see cref="SendVolumeTag"/>
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
RequestVolumeElementAddress = 0xB5,
/// <summary>
/// Reserves a LUN
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
ReserveElement = 0x16,
/// <summary>
/// Reserves a LUN
/// SMC-1 rev. 10a
/// </summary>
ReserveElement10 = 0x56,
/// <summary>
/// Transfers a volume tag template to be searched or new volume tag information for one or more elements
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SendVolumeTag = 0xB6,
#endregion SCSI Medium Changer Commands (SMC)
#region SCSI Communication Commands
/// <summary>
/// Gets data from the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
GetMessage = 0x08,
/// <summary>
/// Gets data from the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
GetMessage10 = 0x28,
/// <summary>
/// Gets data from the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
GetMessage12 = 0xA8,
/// <summary>
/// Sends data to the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SendMessage = 0x0A,
/// <summary>
/// Sends data to the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SendMessage10 = 0x2A,
/// <summary>
/// Sends data to the device
/// SCSI-2 X3T9.2/375R rev. 10l
/// </summary>
SendMessage12 = 0xAA,
#endregion SCSI Communication Commands
#region SCSI Controller Commands
/// <summary>
/// Commands that get information about redundancy groups
/// SCC-2 rev. 4
/// </summary>
RedundancyGroupIn = 0xBA,
/// <summary>
/// Commands that set information about redundancy groups
/// SCC-2 rev. 4
/// </summary>
RedundancyGroupOut = 0xBB,
/// <summary>
/// Commands that get information about volume sets
/// SCC-2 rev. 4
/// </summary>
VolumeSetIn = 0xBE,
/// <summary>
/// Commands that set information about volume sets
/// SCC-2 rev. 4
/// </summary>
VolumeSetOut = 0xBF,
#endregion SCSI Controller Commands
#region Pioneer CD-ROM SCSI-2 Command Set
/// <summary>
/// Scans for a block playing a block on each track cross
/// </summary>
AudioScan = 0xCD,
/// <summary>
/// Requests the drive the status from the previous WriteCDP command.
/// </summary>
ReadCDP = 0xE4,
/// <summary>
/// Requests status from the drive
/// </summary>
ReadDriveStatus = 0xE0,
/// <summary>
/// Reads CD-DA data and/or subcode data
/// </summary>
ReadCdDa = 0xD8,
/// <summary>
/// Reads CD-DA data and/or subcode data using MSF addressing
/// </summary>
ReadCdDaMsf = 0xD9,
/// <summary>
/// Reads CD-XA data
/// </summary>
ReadCdXa = 0xDB,
/// <summary>
/// Reads all subcode data
/// </summary>
ReadAllSubCode = 0xDF,
/// <summary>
/// Sets the spindle speed to be used while reading/writing data to a CD
/// </summary>
SetCdSpeed = 0xDA,
#endregion
#region ATA Command Pass-Through
/// <summary>
/// Sends a 24-bit ATA command to the device
/// ATA CPT rev. 8a
/// </summary>
AtaPassThrough = 0xA1,
/// <summary>
/// Sends a 48-bit ATA command to the device
/// ATA CPT rev. 8a
/// </summary>
AtaPassThrough16 = 0x85,
#endregion ATA Command Pass-Through
#region 6-byte CDB aliases
ModeSelect6 = ModeSelect,
ModeSense6 = ModeSense,
Read6 = Read,
Seek6 = Seek,
Write6 = Write,
#endregion 6-byte CDB aliases
#region SCSI Commands with unknown meaning, mostly vendor specific
ZbcOut = 0x94,
ZbcOut2 = 0x95,
SetCdSpeedUnk = 0xB8,
WriteCdMsf = 0xA2,
WriteCd = 0xAA,
ReadDefectTag = 0xB7,
PlayCd = 0xBC,
SpareIn = 0xBC,
SpareOut = 0xBD,
WriteStream16 = 0x9A,
WriteAtomic = 0x9C,
ServiceActionBidirectional = 0x9D,
WriteLong2 = 0xEA,
UnknownCdCommand = 0xD4,
UnknownCdCommand2 = 0xD5,
#endregion SCSI Commands with unknown meaning, mostly vendor specific
#region SEGA Packet Interface (all are 12-byte CDB)
/// <summary>
/// Verifies that the device can be accessed
/// Sega SPI ver. 1.30
/// </summary>
Sega_TestUnit = TestUnitReady,
/// <summary>
/// Gets current CD status
/// Sega SPI ver. 1.30
/// </summary>
Sega_RequestStatus = 0x10,
/// <summary>
/// Gets CD block mode info
/// Sega SPI ver. 1.30
/// </summary>
Sega_RequestMode = 0x11,
/// <summary>
/// Sets CD block mode
/// Sega SPI ver. 1.30
/// </summary>
Sega_SetMode = 0x12,
/// <summary>
/// Requests device error info
/// Sega SPI ver. 1.30
/// </summary>
Sega_RequestError = 0x13,
/// <summary>
/// Gets disc TOC
/// Sega SPI ver. 1.30
/// </summary>
Sega_GetToc = 0x14,
/// <summary>
/// Gets specified session data
/// Sega SPI ver. 1.30
/// </summary>
Sega_RequestSession = 0x15,
/// <summary>
/// Stops the drive and opens the drive tray, or, on manual trays, stays busy until it is opened
/// Sega SPI ver. 1.30
/// </summary>
Sega_OpenTray = 0x16,
/// <summary>
/// Starts audio playback
/// Sega SPI ver. 1.30
/// </summary>
Sega_PlayCd = 0x20,
/// <summary>
/// Moves drive pickup to specified block
/// Sega SPI ver. 1.30
/// </summary>
Sega_Seek = 0x21,
/// <summary>
/// Fast-forwards or fast-reverses until Lead-In or Lead-Out arrive, or until another command is issued
/// Sega SPI ver. 1.30
/// </summary>
Sega_Scan = 0x22,
/// <summary>
/// Reads blocks from the disc
/// Sega SPI ver. 1.30
/// </summary>
Sega_Read = 0x30,
/// <summary>
/// Reads blocks from the disc seeking to another position at end
/// Sega SPI ver. 1.30
/// </summary>
Sega_Read2 = 0x31,
/// <summary>
/// Reads disc subcode
/// Sega SPI ver. 1.30
/// </summary>
Sega_GetSubcode = 0x40,
#endregion SEGA Packet Interface (all are 12-byte CDB)
/// <summary>
/// Variable sized Command Description Block
/// SPC-4 rev. 16
/// </summary>
VariableSizedCDB = 0x7F
}
#endregion SCSI Commands
}
}
Reference in New Issue View Git Blame Copy Permalink