Correct SEEK command to not transfer anything.
* DiscImageChef.Devices/Device/AtaCommands/AtaCHS.cs:
Correct SEEK command to not transfer anything.
Added differentiation between READ and READ WITH RETRIES for
CHS mode.
Changed blocksize to unsigned on READ LONG.
* DiscImageChef.Devices/Device/AtaCommands/MCPT.cs:
Change MCPT enable and disable commands to use CHS
registers.
* DiscImageChef.Devices/Linux/Command.cs:
Linux kernel granularity for SG_IO is only 1ms, use .NET
counters for faster times. Solves "infinity" speeds on SSDs.
* DiscImageChef/Commands/DumpMedia.cs:
* DiscImageChef/Commands/MediaInfo.cs:
* DiscImageChef/Commands/MediaScan.cs:
* DiscImageChef.Metadata/DeviceReport.cs:
* DiscImageChef/Commands/DeviceReport.cs:
Added support for ATA devices.
* DiscImageChef/Commands/DeviceInfo.cs:
Added support for Media Card Pass Through detection and
information.
* DiscImageChef.CommonTypes/DiscImageChef.CommonTypes.csproj:
Added method to calculate MediaType from SCSI parameters
(mode, density, medium type, device type, etc).
* DiscImageChef.Metadata/DeviceReport.cs:
Added command to guess drive and media parameters and output
an XML report of them.
* DiscImageChef/Commands/DeviceReport.cs:
* DiscImageChef.Metadata/DiscImageChef.Metadata.csproj:
Added command to guess drive and media parameters and output
an XML report of them.
* DiscImageChef/Commands/DumpMedia.cs:
Added preliminary command to dump media. Only SCSI for now.
CDs and tapes are not supported. Errors are blalanty
ignored. Options are incomplete. Not yet usable.
* DiscImageChef/Core/Checksum.cs:
* DiscImageChef/Commands/CreateSidecar.cs:
Moved checksum generation to a separate class.
* CICMMetadata:
Added support for ADIP.
* DiscImageChef.CommonTypes/MediaType.cs:
Added parameters of UDO media.
Moved DataPlay outside of Iomega, as it's not from that
manufacturer.
Added missing Exatape media and corrected 160m XL one.
Added SyJet media.
Added all ECMA defined magneto-optical (sectors calculated
from specifications, unchecked).
Added PD media.
Added Imation 320Gb RDX.
Added generic USB flash drives.
* DiscImageChef.Decoders/SCSI/Enums.cs:
Make enumerations public.
* DiscImageChef.Decoders/SCSI/Inquiry.cs:
* DiscImageChef.Devices/Device/Constructor.cs:
Trim space padded strings on SCSI INQUIRY.
* DiscImageChef.Devices/Device/ScsiCommands/MMC.cs:
Added PREVENT ALLOW MEDIUM REMOVAL.
Added START STOP UNIT.
* DiscImageChef.Devices/Device/ScsiCommands/NEC.cs:
Rename NEC methods.
* DiscImageChef.Devices/Device/ScsiCommands/Pioneer.cs:
Corrected Pioneer transfer length calculation.
* DiscImageChef.Devices/Device/ScsiCommands/Plextor.cs:
Renamed Plextor methods.
* DiscImageChef.Devices/Device/ScsiCommands/SPC.cs:
Renamed SSC PREVENT ALLOW MEDIUM REMOVAL to uncollide with
MMC same name but different command.
* DiscImageChef.Devices/DiscImageChef.Devices.csproj:
Set platform target to x86 (does it really matter?).
* DiscImageChef.Devices/Linux/Command.cs:
Reduced allocation for readlink() to current kernel
MAX_PATH.
* DiscImageChef.Devices/Linux/Enums.cs:
Modified Linux ioctl to 32-bit. Works on 64-bit also. Solves
commands not working on 32-bit environments.
* DiscImageChef.DiscImages/ZZZRawImage.cs:
Changed ECMA-184 and ECMA-183 enums.
* DiscImageChef.Metadata/Dimensions.cs:
Added all ECMA defined magneto-opticals.
Added PD media.
Added 320Gb RDX.
Corrected Exatape 160m XL.
Added Exatape 22m and 28m.
* DiscImageChef.Metadata/MediaType.cs:
Added 356mm magneto-optical media.
Changed ECMA-184 and ECMA-183 enums.
Added USB generic flash drive.
* DiscImageChef/Commands/DeviceInfo.cs:
Corrected SCSI INQUIRY naming.
Corrected SCSI MODE SENSE (6) parameters.
Reduced SCSI MODE SENSE timeout, some devices just get stuck
with unsupported MODE SENSE commanda and must be left to
timeout.
Changed FUJITSU vendor string comparison.
* DiscImageChef/Commands/MediaInfo.cs:
Added method to calculate MediaType from SCSI parameters
(mode, density, medium type, device type, etc).
Changed some error WriteLine() to debug ones. Too much
verbosity.
Added DVD media type decoding from PFI.
Found a drive that dumps ADIP, enabling it again (not
decoded).
* DiscImageChef/Commands/MediaScan.cs:
Added option to generate ImgBurn compatible log to
media-scan command.
* DiscImageChef/DiscImageChef.csproj:
Moved checksum generation to a separate class.
Added command to guess drive and media parameters and output
an XML report of them.
Added preliminary command to dump media. Only SCSI for now.
CDs and tapes are not supported. Errors are blalanty
ignored. Options are incomplete. Not yet usable.
* DiscImageChef/Main.cs:
Added command to guess drive and media parameters and output
an XML report of them.
Added preliminary command to dump media. Only SCSI for now.
CDs and tapes are not supported. Errors are blalanty
ignored. Options are incomplete. Not yet usable.
* DiscImageChef/Options.cs:
Added command to guess drive and media parameters and output
an XML report of them.
Added preliminary command to dump media. Only SCSI for now.
CDs and tapes are not supported. Errors are blalanty
ignored. Options are incomplete. Not yet usable.
Added option to generate ImgBurn compatible log to media-scan
command.
Added support for USB on Linux.
* DiscImageChef/Commands/DeviceInfo.cs:
* DiscImageChef.Devices/Device/Variables.cs:
Added support for USB detection and metadata.
* DiscImageChef.Devices/Linux/Extern.cs:
* DiscImageChef.Devices/Linux/Command.cs:
Added readlink(3) support, for getting symlink destinations.
* DiscImageChef.Decoders/ATA/Errors.cs:
* DiscImageChef/Commands/DeviceInfo.cs:
* DiscImageChef.Devices/Linux/Command.cs:
* DiscImageChef.Devices/Device/Commands.cs:
* DiscImageChef.Devices/Device/AtaCommands.cs:
* DiscImageChef.Devices/Device/Constructor.cs:
* DiscImageChef.Devices/Device/AtapiCommands.cs:
* DiscImageChef.Devices/DiscImageChef.Devices.csproj:
* DiscImageChef.Decoders/DiscImageChef.Decoders.csproj:
Moved ATA register definition to a more common place.
* DiscImageChef.Decoders/SCSI/Sense.cs:
Added information from SAT-4.
* DiscImageChef.Devices/DiscImageChef.Devices.csproj:
Added structs with ATA registers.
* DiscImageChef.Devices/Command.cs:
* DiscImageChef.Devices/Device/Commands.cs:
Added ATA commands.
* DiscImageChef.Devices/Enums.cs:
Added SCSI's ATA Command Pass-Through enumerations.
* DiscImageChef.Devices/Linux/Command.cs:
Added ATA commands using libATA's SATL.
