text/microsoft-resx 1.3 System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Querying ATA IDENTIFY... Querying USB information... Querying PCMCIA information... NVMe devices not yet supported. Querying ATAPI IDENTIFY... [olive]Waiting for drive to become ready[/] [red]Device not ready. Sense [green]{0}[/] ASC [teal]{1:X2}h[/] ASCQ [aqua]{2:X2}h[/][/] Got sense status but no sense buffer Drive supports SCSI READ LONG but I cannot find the correct size. Do you want me to try? (This can take hours) Trying READ LONG... Trying READ LONG with a size of {0} bytes... Trying SCSI READ LONG (10)... Trying SCSI READ LONG (16)... Please write the media manufacturer and press enter: MD DATA (140Mb data MiniDisc) 60 minutes rewritable MiniDisc 74 minutes rewritable MiniDisc 80 minutes rewritable MiniDisc Embossed Audio MiniDisc Unknown device type. Device supports the Media Card Pass Through Command Set Device reports incorrect media card type Device contains a Secure Digital card Device contains a MultiMediaCard Device contains a Secure Digital I/O card Device contains a Smart Media card Device contains unknown media card type {0} Media card is write protected Card specific data: 0x{0:X4} Device identified as {0} [bold][blue]ASCII Page[/][/] [italic][teal]{0:X2}h[/][/]: [slateblue1]{1}[/] [bold][blue]Unit Serial Number:[/][/] [italic][teal]{0}[/][/] [bold][blue]ASCII implemented operating definitions:[/][/] [slateblue1]{0}[/] [bold][blue]Manufacturer-assigned Serial Number:[/][/] [italic][teal]{0}[/][/] [bold][blue]TapeAlert Supported Flags Bitmap:[/][/] [italic][teal]0x{0:X16}[/][/] [bold][blue]Automation Device Serial Number:[/][/] [italic][teal]{0}[/][/] [bold][blue]Data Transfer Device Element Address:[/][/] [italic][teal]0x{0}[/][/] [bold][blue]Found undecoded SCSI VPD page[/][/] [italic][teal]0x{0:X2}[/][/] GET CONFIGURATION length is {0} bytes GET CONFIGURATION current profile is {0:X4}h Feature {0:X4}h Found unknown feature code {0:X4}h GET CONFIGURATION returned no feature descriptors [slateblue1]Drive has loaded a total of [teal]{0}[/] discs[/] [slateblue1]Drive has spent [aqua]{0}[/] reading CDs[/] [slateblue1]Drive has spent [aqua]{0}[/] writing CDs[/] [slateblue1]Drive has spent [aqua]{0}[/] reading DVDs[/] [slateblue1]Drive has spent [aqua]{0}[/] writing DVDs[/] [slateblue1]Drive supports PoweRec, is enabled and recommends [lime]{0}[/] Kb/sec.[/] [slateblue1]Drive supports PoweRec and has it enabled.[/] [slateblue1]Selected PoweRec speed for currently inserted media is [lime]{0}[/] Kb/sec ([teal]{1}x[/])[/] [slateblue1]Maximum PoweRec speed for currently inserted media is [lime]{0}[/] Kb/sec ([teal]{1}x[/])[/] [slateblue1]Last used PoweRec was [lime]{0}[/] Kb/sec ([teal]{1}x[/])[/] [slateblue1]Drive supports PoweRec and has it disabled.[/] [slateblue1]Drive supports Plextor SilentMode[/] [slateblue1]Plextor SilentMode is enabled:[/] [slateblue1]Access time is slow[/] [slateblue1]Access time is fast[/] [slateblue1]CD read speed limited to [teal]{0}x[/][/] [slateblue1]DVD read speed limited to [teal]{0}x[/][/] [slateblue1]CD write speed limited to [teal]{0}x[/][/] [slateblue1]Drive supports Plextor GigaRec[/] [slateblue1]Drive supports Plextor SecuRec[/] [slateblue1]Drive supports Plextor SpeedRead[/] [green]Drive supports Plextor SpeedRead and has it enabled[/] [slateblue1]Drive supports hiding CD-Rs and forcing single session[/] [green]Drive currently hides CD-Rs[/] [green]Drive currently forces single session[/] [slateblue1]Drive supports Plextor VariRec[/] [slateblue1]Drive supports Plextor VariRec for DVDs[/] [slateblue1]Drive supports bitsetting DVD+R book type[/] [slateblue1]Drive supports bitsetting DVD+R DL book type[/] [slateblue1]Drive supports test writing DVD+[/] [slateblue1]Can do challenge/response with Xbox discs[/] [slateblue1]Can read and decrypt SS from Xbox discs[/] [slateblue1]Can set xtreme unlock state with Xbox discs[/] [slateblue1]Can set wxripper unlock state with Xbox discs[/] [slateblue1]Can do challenge/response with Xbox 360 discs[/] [slateblue1]Can read and decrypt SS from Xbox 360 discs[/] [slateblue1]Can set xtreme unlock state with Xbox 360 discs[/] [slateblue1]Can set wxripper unlock state with Xbox 360 discs[/] [slateblue1]Can set locked state[/] [slateblue1]Can skip read errors[/] [bold][blue]Block limits for device:[/][/] Generating subchannels... [slateblue1]Writing metadata sidecar[/] [red]Cannot create a sidecar from a directory.[/] Stack trace: {0} [slateblue1]Media has [violet]{0}[/] blocks of [lime]{1}[/] bytes/each. (for a total of [lime]{2}[/])[/] Xbox DMI Xbox 360 DMI [bold][blue]Lead-In CMI:[/][/] Medium Status [bold][blue]DVD-R(W) Pre-Recorded Information:[/][/] [bold][blue]DVD-R(W) PFI:[/][/] [bold][blue]Blu-ray Disc Information:[/][/] [bold][blue]Blu-ray Burst Cutting Area:[/][/] [bold][blue]Blu-ray Disc Definition Structure:[/][/] [bold][blue]Blu-ray Cartridge Status:[/][/] [bold][blue]Blu-ray Spare Area Information:[/][/] Track Resources Information POW Resources Information [bold][blue]Standard Disc Information:[/][/] [bold][blue]Session information:[/][/] [bold][blue]Raw TOC:[/][/] PMA CD-TEXT on Lead-In MCN Track's {0} ISRC Xbox Security Sector Video layer 0 size Video layer 1 size Middle zone size Game data size Total size Real layer break [bold][blue]Media Serial Number:[/][/] [bold][blue]Track calculations:[/][/] [bold][blue]Offsets:[/][/] [red]Drive reading offset not found in database.[/] [red]Disc offset cannot be calculated.[/] [slateblue1]Drive reading offset is [lime]{0}[/] bytes ([teal]{1}[/] samples).[/] [olive]Disc write offset is unknown.[/] [slateblue1]Combined offset is [lime]{0}[/] bytes ([teal]{1}[/] samples).[/] [slateblue1]Took a total of [teal]{0}[/] ([teal]{1}[/] processing commands).[/] [slateblue1]Average speed: [aqua]{0}[/].[/] [slateblue1]Fastest speed burst: [aqua]{0}[/].[/] [slateblue1]Slowest speed burst: [aqua]{0}[/].[/] [bold][blue]Summary[/][/] [lime]{0} sectors took less than 3 ms.[/] [green]{0} sectors took less than 10 ms but more than 3 ms.[/] [darkorange]{0} sectors took less than 50 ms but more than 10 ms.[/] [olive]{0} sectors took less than 150 ms but more than 50 ms.[/] [orange3]{0} sectors took less than 500 ms but more than 150 ms.[/] [red]{0} sectors took more than 500 ms.[/] [maroon][teal]{0}[/] sectors could not be read.[/] [slateblue1]Testing [teal]{0}[/] seeks, longest seek took [aqua]{1:F3}[/] ms, fastest one took [aqua]{2:F3}[/] ms. ([aqua]{3:F3}[/] ms average)[/] [slateblue1]Whole device[/] Device's block size is fixed at {0} bytes Device's maximum block size is {0} bytes Device does not specify a maximum block size Device's minimum block size is {0} bytes Device's needs a block size granularity of 2^{0} ({1} bytes) [bold][slateblue1]Filesystem type:[/][/] [green]{0}[/] [bold][slateblue1]Volume name:[/][/] [rosybrown]{0}[/] [bold][slateblue1]Volume serial:[/][/] [fuchsia]{0}[/] [bold][slateblue1]Application identifier:[/][/] [blue]{0}[/] [bold][slateblue1]System identifier:[/][/] [blue]{0}[/] [bold][slateblue1]Volume set identifier:[/][/] [blue]{0}[/] [bold][slateblue1]Data preparer identifier:[/][/] [blue]{0}[/] [bold][slateblue1]Publisher identifier:[/][/] [blue]{0}[/] [slateblue1]Volume created on[/] [yellow3]{0:F}[/] {0} is date and time [slateblue1]Volume effective from[/] [yellow3]{0:F}[/] {0} is date and time [slateblue1]Volume last modified on[/] [yellow3]{0:F}[/] {0} is date and time [slateblue1]Volume expired on[/] [yellow3]{0:F}[/] {0} is date and time [slateblue1]Volume last backed up on[/] [yellow3]{0:F}[/] {0} is date and time [slateblue1]Volume has [lime]{0}[/] clusters of [teal]{1}[/] bytes each (total of [aqua]{2}[/] bytes)[/] [slateblue1]Volume has [lime]{0}[/] clusters free ([aqua]{1:P}[/])[/] {1} is a percentage [slateblue1]Volume contains [violet]{0}[/] files[/] Filesystem contains boot code Filesystem has not been unmounted correctly or contains errors [slateblue1]Image without headers is [lime]{0}[/] bytes long[/] [slateblue1]Contains a media of [lime]{0}[/] sectors with a maximum sector size of [teal]{1}[/] bytes (if all sectors are of the same size this would be [aqua]{2}[/])[/] Contains a media of type {0} and XML type {1} Was created with {0} version {1} Was created with {0} Created by: {0} {0} is a person's name [slateblue1]Created on[/] [yellow3]{0}[/] [slateblue1]Last modified on[/] [yellow3]{0}[/] [slateblue1]Media is number [teal]{0}[/] on a set of [teal]{1}[/] medias[/] Media manufacturer: {0} Media serial number: {0} Drive serial number: {0} [bold][navy]Session[/][/] [bold][lime]Start[/][/] [bold][purple]First track[/][/] [bold][purple]Last track[/][/] [bold][lime]End[/][/] [bold][teal]Track[/][/] [bold][aqua]Bps[/][/] Bytes per sector [bold][aqua]Raw bps[/][/] Bytes per sector [bold][fuchsia]Subchannel[/][/] [bold][darkgreen]Pregap[/][/] CompactDisc DVD / HD DVD DVD±R(W) Blu-ray Xbox MMC SSC DVD GD-ROM dump support is not yet implemented. GD-ROM scan support is not yet implemented. Scanning Xbox discs is not yet supported. [bold][slateblue1]Partition name:[/][/] [green]{0}[/] [bold][slateblue1]Partition type:[/][/] [yellow]{0}[/] [slateblue1][bold]Partition start:[/] sector [lime]{0}[/], byte [aqua]{1}[/][/] [slateblue1][bold]Partition length:[/] [violet]{0}[/] sectors, [teal]{1}[/] bytes[/] [bold][slateblue1]Partition description:[/][/] Drive identifies as Apple OEM drive {0} sectors [red]Aborting...[/] [slateblue1]Setting speed to [teal]8x[/] for [green]CD-i Ready[/] reading as audio.[/] [red]Aborted![/] [slateblue1]Reading sector [lime]{0}[/] of [violet]{1}[/] ([aqua]{2}[/])[/] [slateblue1]Adding [green]CD-i Ready[/] hole from LBA [lime]{0}[/] to [violet]{1}[/] inclusive.[/] [slateblue1]Setting speed to [teal]8x[/] for audio reading.[/] [slateblue1]Setting speed to [teal]MAX[/] for data reading[/] [slateblue1]Setting speed to [teal]{0}x[/] for data reading.[/] READ error: {0} [slateblue1]Skipping [violet]{0}[/] blocks from errored block [lime]{1}[/].[/] [olive]Failed crossing into Lead-Out, dump may not be correct.[/] Raw CD dumping not yet implemented [red]Could not get tracks![/] [red]Drive does not support the requested subchannel format, not continuing...[/] [olive]Output format does not support subchannels, continuing...[/] [red]Output format does not support subchannels, not continuing...[/] [slateblue1]Checking if drive supports reading without subchannel...[/] [slateblue1]Drive does not support [fuchsia]READ CD[/], trying [fuchsia]SCSI READ[/] commands...[/] [slateblue1]Checking if drive supports [fuchsia]READ(6)[/]...[/] [slateblue1]Checking if drive supports [fuchsia]READ(10)[/]...[/] [slateblue1]Checking if drive supports [fuchsia]READ(12)[/]...[/] [slateblue1]Checking if drive supports [fuchsia]READ(16)[/]...[/] [red]Cannot read from disc, not continuing...[/] [slateblue1]Drive supports [fuchsia]READ(6)[/]...[/] [slateblue1]Drive supports [fuchsia]READ(10)[/]...[/] [slateblue1]Drive supports [fuchsia]READ(12)[/]...[/] [slateblue1]Drive supports [fuchsia]READ(16)[/]...[/] [slateblue1]Drive can read without subchannel...[/] [slateblue1]Full raw subchannel reading supported...[/] [slateblue1]PQ subchannel reading supported...[/] [olive][bold]WARNING:[/] If disc says [red]CD+G[/], [red]CD+EG[/], [red]CD-MIDI[/], [red]CD Graphics[/] or [red]CD Enhanced Graphics[/], dump will be incorrect![/] [slateblue1]Drive returns subchannel in [rosybrown]BCD[/]...[/] [slateblue1]Drive does not returns subchannel in [rosybrown]BCD[/]...[/] [slateblue1]Calculating [italic]pregaps[/], can take [italic]some time[/]...[/] [red]Output format does not support storing raw data, this may end in a loss of data, not continuing...[/] [olive]Output format does not support storing raw data, this may end in a loss of data, continuing...[/] [red]Output format does not support audio tracks, cannot continue...[/] [red]Output format does not support pregaps, this may end in a loss of data, not continuing... [olive]Output format does not support pregaps, this may end in a loss of data, continuing...[/] [red]Cannot dump blank media.[/] [red]Could not process resume file, not continuing...[/] [red]Output format does not support [orange3]{0}[/], continuing...[/] {0} is media tag name [red]Output format does not support [orange3]{0}[/], not continuing...[/] [slateblue1]Solving [italic]lead-outs[/]...[/] [slateblue1]Detecting disc type...[/] [olive]Disc contains a hidden track...[/] [slateblue1]Checking mode for track [teal]{0}[/]...[/] [olive]Unable to guess mode for track [teal]{0}[/], continuing...[/] [slateblue1]Track [teal]{0}[/] is [green]MODE1[/][/] [slateblue1]Track [teal]{0}[/] is [green]MODE2[/][/] [slateblue1]Track [teal]{0}[/] is [green]MODE2 FORM 2[/][/] [slateblue1]Track [teal]{0}[/] is [green]MODE2 FORM 1[/][/] [slateblue1]Track [teal]{0}[/] is unknown mode [teal]{1}[/][/] [red]Output format does not support more than 1 track, not continuing..[/] [red]Output format does not support audio tracks, not continuing...[/] [red]Output format only supports MODE 1 tracks, not continuing...[/] [olive]Output format does not support CD first track pregap, continuing...[/] [red]Output format does not support CD first track pregap, not continuing..[/] Device error {0} trying to guess ideal transfer length. [slateblue1]Reading [violet]{0}[/] sectors at a time.[/] [slateblue1]Device reports [violet]{0}[/] blocks ([lime]{1}[/] bytes).[/] [slateblue1]Device can read [violet]{0}[/] blocks at a time.[/] [slateblue1]Device reports [lime]{0}[/] bytes per logical block.[/] [slateblue1]SCSI device type: [italic][rosybrown]{0}[/][/].[/] [slateblue1]Media identified as [fuchsia]{0}[/].[/] [red]Error creating output image, not continuing.[/] [red]Error sending tracks to output image, not continuing.[/] [slateblue1]Creating subchannel log in[/] [green]{0}[/] [slateblue1]Setting flags for track [teal]{0}[/]...[/] [slateblue1]Found Media Catalogue Number:[/] [italic][teal]{0}[/][/] [slateblue1]Found ISRC for track [teal]{0}[/]:[/] [italic][navy]{1}[/][/] [slateblue1]Resuming from block [lime]{0}[/].[/] [slateblue1]Track [teal]{0}[/] starts at LBA [lime]{1}[/] and ends at LBA [lime]{2}[/][/] [green]No audio tracks, disabling offset fix.[/] [olive]READ CD command is not supported, disabling offset fix. Dump may not be correct.[/] [olive]There are audio tracks and offset fixing is disabled, dump may not be correct.[/] [olive]Dump may not be correct.[/] [olive]Disc write offset is unknown, dump may not be correct.[/] [slateblue1]Combined disc and drive offsets are [lime]{0}[/] bytes ([teal]{1}[/] samples).[/] [slateblue1]Disc offset is [lime]{0}[/] bytes ([teal]{1}[/] samples)[/] [red]Dumping [green]CD-i Ready[/] requires the output image format to support long sectors.[/] [red]Dumping [green]CD-i Ready[/] requires the drive to support the [fuchsia]READ CD[/] command.[/] [olive]Enabling skipping CD-i Ready hole because drive returns data as audio.[/] [olive]There will be thousand of errors between track 0 and track 1, that is normal and you can ignore them.[/] [slateblue1]Dump finished in [aqua]{0}[/].[/] [slateblue1]Average dump speed: [aqua]{0}[/][/] [slateblue1]Average write speed: [aqua]{0}[/][/] Error: Tag type {0} is null, skipping... Cannot write tag {0}. [red]Sector [teal]{0}[/] could not be read.[/] [slateblue1]Setting [italic]ISRC[/] for track [teal]{0}[/] to [italic][navy]{1}[/][/][/] [slateblue1]Setting disc Media Catalogue Number to [teal]{0}[/][/] [slateblue1]Closing output file.[/] [slateblue1]Closed in [aqua]{0}[/].[/] [slateblue1]Took a total of [aqua]{0}[/] ([aqua]{1}[/] processing commands, [aqua]{2}[/] checksumming, [aqua]{3}[/] writing, [aqua]{4}[/] closing).[/] [maroon][teal]{0}[/] subchannels could not be read.[/] [slateblue1]Sending [fuchsia]MODE SELECT[/] to drive (return damaged blocks).[/] [olive]Drive did not accept [fuchsia]MODE SELECT[/] command for persistent error reading, try another drive.[/] [slateblue1]Retrying sector [lime]{0}[/], pass [teal]{1}[/], recovering partial data, [italic]forward[/][/] [slateblue1]Retrying sector [lime]{0}[/], pass [teal]{1}[/], [italic]forward[/][/] [slateblue1]Retrying sector [lime]{0}[/], pass [teal]{1}[/], recovering partial data, [italic]reverse[/][/] [slateblue1]Retrying sector [lime]{0}[/], pass [teal]{1}[/], [italic]reverse[/][/] [slateblue1]Correctly retried sector [lime]{0}[/] in pass [teal]{1}[/].[/] Sending MODE SELECT to drive (ignore error correction). Trying to get partial data for sector {0} Got partial data for sector {0} in pass {1}. [slateblue1]Sending [fuchsia]MODE SELECT[/] to drive (return device to previous status).[/] [slateblue1]Retrying sector [lime]{0}[/] subchannel, pass [teal]{1}[/], [italic]forward[/][/] [slateblue1]Retrying sector [lime]{0}[/] subchannel, pass [teal]{1}[/], [italic]reverse[/][/] [slateblue1]Correctly retried sector [lime]{0}[/] subchannel in pass [teal]{1}[/].[/] Reading lead-outs Reading sector {0} at lead-out ({1}) [slateblue1]Reading first track pregap[/] [slateblue1]Trying to read first track pregap sector [lime]{0}[/] ([aqua]{1}[/])[/] [slateblue1]Got [violet]{0}[/] first track pregap sectors.[/] Subchannel is BCD Subchannel is not BCD Could not detect drive subchannel BCD Could not detect if drive subchannel is BCD or not, pregaps could not be calculated, dump may be incorrect... Skipping track {0} Skipping track {0} due to Plextor firmware bug Track {0} LBA: {0}, Try {1}, Sense {2} {0} is LBA number, {1} is try number, {2} is error message LBA: {0}, Try {1}, Sense {2}, Q: {3:X2} {4:X2} {5:X2} {6:X2} {7:X2} {8:X2} {9:X2} {10:X2} {11:X2} {12:X2} CRC 0x{13:X2}{14:X2}, Calculated CRC: 0x{15:X2}{16:X2} 0 is LBA number, 1 is try number, 2 is sense message, 3 to 12 are Q subchannel hex values, 13 to 16 are CRC hex values LBA: {0}, Try {1}, Sense {2}, Q (FIXED): {3:X2} {4:X2} {5:X2} {6:X2} {7:X2} {8:X2} {9:X2} {10:X2} {11:X2} {12:X2} CRC 0x{13:X2}{14:X2}, Calculated CRC: 0x{15:X2}{16:X2} 0 is LBA number, 1 is try number, 2 is sense message, 3 to 12 are Q subchannel hex values, 13 to 16 are CRC hex values Could not read subchannel for this track, supposing 150 sectors. Could not read subchannel for this track, supposing {0} sectors. Could not read subchannel for sector {0} Could not get correct subchannel for sector {0} All Q empty for LBA {0} Invalid Q position for LBA {0}, got {1} [slateblue1]Pregap for track [teal]{0}[/]: [violet]{1}[/][/] [slateblue1]Track [teal]{0}[/] pregap is [violet]{1}[/] sectors[/] [olive][green]{0}[/] sectors at the end of the disc are unreadable. This is normal in CD-R(W) discs as these sectors are created by burning software as part of the recording process. Empty ones will be generated and stored in the image.[/] [slateblue1]Checking if drive supports full raw subchannel reading...[/] [slateblue1]Checking if drive supports PQ subchannel reading...[/] [slateblue1]Reading [italic]ATIP[/][/] [slateblue1]Reading [italic]Disc Information[/].[/] [slateblue1]Reading [italic]PMA[/][/] [slateblue1]Reading [italic]Session Information[/][/] [slateblue1]Reading [italic]CD-Text from Lead-In[/][/] [slateblue1]Reading [italic]full TOC[/][/] [slateblue1]Building track map...[/] [red]Cannot read [italic]RAW TOC[/], requesting processed one...[/] [red]Could not read TOC, if you want to continue, use force, and will try from LBA [lime]0[/] to [lime]360000[/]...[/] [red]No tracks found, adding a single track from [lime]0[/] to [italic]Lead-Out[/][/] [red]Could not find [italic]Lead-Out[/], if you want to continue use force option and will continue until [lime]360000[/] sectors...[/] [olive][bold]WARNING:[/] Could not find [italic]Lead-Out[/] start, will try to read up to [violet]360000[/] sectors, probably will fail before...[/] [slateblue1]Trimming skipped sectors[/] [slateblue1]Trimming sector [lime]{0}[/][/] [slateblue1]Trimming finished in [aqua]{0}[/].[/] [red]Could not read..[/]. [red]Retrode partition not recognized, not dumping...[/] [slateblue1]Reading root directory in sector [lime]{0}[/]...[/] [red]No cartridge found, not dumping...[/] [red]The specified format does not support the inserted cartridge...[/] Error {0} creating output image, not continuing. [slateblue1]Reading byte [lime]{0}[/] of [violet]{1}[/] ([aqua]{2}[/])[/] [slateblue1]Skipping [violet]{0}[/] bytes from errored byte [lime]{1}[/].[/] [red]Image is not writable, aborting...[/] [red]Could not detect capacity...[/] [red]ERROR: Unable to read medium or empty medium present...[/] [red]Unable to read medium or empty medium present...[/] [slateblue1]Media detected as [fuchsia]MemoryStick Pro Duo[/]...[/] [slateblue1]Media detected as [fuchsia]MemoryStick Duo[/]...[/] [slateblue1]Correctly retried block [lime]{0}[/] in pass [teal]{1}[/].[/] [slateblue1]Creating sidecar.[/] [red]Error [orange3]{0}[/] opening created image.[/] [slateblue1]Sidecar created in [aqua]{0}[/].[/] [slateblue1]Average checksum speed: [aqua]{0}[/][/] [slateblue1]Found filesystem [green]{0}[/] at sector [lime]{1}[/][/] [red]Selected output format does not support MemoryStick Duo or UMD, cannot dump...[/] [slateblue1]Checking if media is UMD or MemoryStick...[/] [red]Could not get MODE SENSE...[/] [red]Could not decode MODE SENSE...[/] [slateblue1]FAT starts at sector [lime]{0}[/] and runs for [violet]{1}[/] sectors...[/] [slateblue1]Reading FAT...[/] [slateblue1]Traversing FAT...[/] [red]The specified image format cannot represent optical discs.[/] [slateblue1]Device reports [lime]{0}[/] bytes per physical block.[/] [slateblue1]Media part number is [green]{0}[/].[/] Error retrieving CMI for sector {0} Error retrieving title key for sector {0} INSITE floptical drives get crazy on the SCSI bus when an error is found, stopping so you can reboot the computer or reset the SCSI bus appropriately. [slateblue1]Initializing reader.[/] [slateblue1]Requesting [fuchsia]MODE SENSE (10)[/].[/] [slateblue1]Requesting [fuchsia]MODE SENSE (6)[/].[/] [red]MiniDisc albums, NetMD discs or user-written audio MiniDisc cannot be dumped.[/] [red]ERROR: Cannot find correct read command: {0}.[/] Unable to read medium. [red]ERROR: Cannot get blocks to read: {0}.[/] [slateblue1]SCSI medium type: [teal]{0}[/].[/] [slateblue1]SCSI density type: [teal]{0}[/].[/] [slateblue1]SCSI floppy mode page present: [rosybrown]{0}[/].[/] [red]Device doesn't seem capable of reading raw data from media.[/] Device is capable of reading raw data but I've been unable to guess correct sector size. Not continuing. If you want to continue reading cooked data when raw is not available use the force option. Continuing dumping cooked data. [slateblue1]Reading [lime]{0}[/] raw bytes ([lime]{1}[/] cooked bytes) per sector.[/] [red]Output format does not support [orange3]{0}[/].[/] [olive]Several media tags not supported, continuing...[/] [red]Several media tags not supported, not continuing...[/] [olive]Image does not support multiple sessions in non Compact Disc dumps, continuing...[/] [red]Image does not support multiple sessions in non Compact Disc dumps, not continuing...[/] [olive]Image does not support multiple tracks in non Compact Disc dumps, continuing...[/] [red]Image does not support multiple tracks in non Compact Disc dumps, not continuing...[/] [slateblue1]Setting geometry to [lime]{0}[/] cylinders, [lime]{1}[/] heads, [lime]{2}[/] sectors per track[/] [olive]Creating single track as could not retrieve track list from drive.[/] [slateblue1]Setting speed to [teal]MAX[/].[/] [slateblue1]Setting speed to [teal]{0}x[/].[/] [olive]Title keys dumping is enabled. This will be very slow.[/] [slateblue1]Reading USB descriptors.[/] Cannot write USB descriptors. [slateblue1]Requesting [fuchsia]ATAPI IDENTIFY PACKET DEVICE[/].[/] Cannot write ATAPI IDENTIFY PACKET DEVICE. [slateblue1]Requesting [fuchsia]SCSI INQUIRY[/].[/] Cannot write SCSI INQUIRY. Cannot write SCSI MODE SENSE (10). Cannot write SCSI MODE SENSE (6). Found blank block {0} in pass {1}. [slateblue1]Retrying title key [lime]{0}[/], pass [teal]{1}[/], [italic]forward[/][/] [slateblue1]Retrying title key [lime]{0}[/], pass [teal]{1}[/], [italic]reverse[/][/] [slateblue1]Correctly retried title key [lime]{0}[/] in pass [teal]{1}[/].[/] The current environment doesn't support the MEDIUM SCAN command, dump will take much longer than normal. Please open a bug report in Github with the manufacturer and model of this device, as well as your operating system name and version and this message: This environment correctly supports MEDIUM SCAN command. Scanning for {0} written blocks starting in block {1} Scanning for {0} blank blocks starting in block {1} [red]Cannot dump empty media![/] Found blank block {0}. Raw dumping not yet supported in ATA devices, continuing... Raw dumping not yet supported in ATA devices, aborting... [slateblue1]Requesting [fuchsia]ATA IDENTIFY DEVICE[/].[/] ERROR: Cannot get block size: {0}. [slateblue1]Device reports [lime]{0}[/] cylinders [lime]{1}[/] heads [lime]{2}[/] sectors per track.[/] Output format does not support USB descriptors. Output format does not support PCMCIA CIS descriptors. Output format does not support ATA IDENTIFY. [slateblue1]Reading cylinder [lime]{0}[/] head [lime]{1}[/] sector [lime]{2}[/] ([aqua]{3}[/]) Error reading cylinder {0} head {1} sector {2}. [slateblue1]Reading PCMCIA CIS.[/] [slateblue1]Decoding PCMCIA CIS.[/] Unable to communicate with ATA device. [red]Device not in database, please create a device report and attach it to a Github issue.[/] [slateblue1]Device in database since [yellow3]{0}[/].[/] [red]Could not detect image format.[/] [slateblue1]Device reports current profile is [teal]0x{0:X4}[/][/] [slateblue1]Device reports disc has [violet]{0}[/] blocks[/] [slateblue1]Reading [italic]Physical Format Information[/][/] [red]Dumping Nintendo GameCube or Wii discs is not yet implemented.[/] [slateblue1]Reading [italic]Disc Manufacturing Information[/][/] [red]Dumping Xbox Game Discs requires a drive with Kreon firmware.[/] [slateblue1]Reading [italic]Lead-in Copyright Information[/].[/] [green]Drive reports no copy protection on disc.[/] [olive]Drive reports the disc uses copy protection. The dump will be incorrect unless decryption is enabled.[/] [olive]Drive reports disc uses CSS copy protection.[/] [slateblue1]Reading [italic]disc key[/].[/] [green]Disc and drive authentication succeeded.[/] [green]Disc and drive regions match.[/] [red]Disc and drive regions do not match. The dump will be incorrect[/] [green]Decrypting disc key.[/] [green]Decryption of disc key succeeded.[/] [red]Decryption of disc key failed.[/] [red]Drive reports disc uses [darkorange]{0}[/] copy protection. This is not yet supported and the dump will be incorrect.[/] [slateblue1]Reading [italic]Burst Cutting Area[/].[/] [slateblue1]Reading [italic]Disc Description Structure[/].[/] [slateblue1]Reading [italic]Spare Area Information[/].[/] [slateblue1]Reading [italic]Pre-Recorded Information[/].[/] [slateblue1]Reading [italic]Media Identifier[/].[/] [slateblue1]Reading [italic]Recordable Physical Information[/].[/] [slateblue1]Reading [italic]ADdress In Pregroove[/].[/] [slateblue1]Reading [italic]Disc Control Blocks[/].[/] [slateblue1]Reading [italic]Disc Definition Structure[/].[/] Resuming CHS devices is currently not supported. Resume file specifies a tape device but you're requesting to dump a not tape device, not continuing... Resume file specifies a not tape device but you're requesting to dump a tape device, not continuing... Resume file specifies a removable device but you're requesting to dump a non removable device, not continuing... Resume file specifies a non removable device but you're requesting to dump a removable device, not continuing... Resume file specifies a device with {0} blocks but you're requesting to dump one with {1} blocks, not continuing... Resume file specifies a device manufactured by {0} but you're requesting to dump one by {1}, not continuing... Resume file specifies a device model {0} but you're requesting to dump model {1}, not continuing... Resume file specifies a device with serial {0} but you're requesting to dump one with serial {1}, not continuing... Resume file specifies a device with firmware version {0} but you're requesting to dump one with firmware version {1}, not continuing... Found corrupt resume file, cannot continue... [bold][red]Please insert media in drive[/][/] Error testing unit was ready: {0} Unknown sense testing unit was ready. Tapes cannot be dumped raw. The specified image format cannot represent streaming tapes. Raw dumping is not supported in MultiMediaCard or SecureDigital devices. Continuing... Raw dumping is not supported in MultiMediaCard or SecureDigital devices. Aborting... [slateblue1]Reading CSD[/] [slateblue1]Reading Extended CSD[/] [slateblue1]Reading OCR[/] [slateblue1]Reading SCR[/] [slateblue1]Reading CID[/] Unable to get device size. [slateblue1]Device reports [violet]{0}[/] blocks.[/] Error {0} reopening device. ERROR: Cannot get blocks to read, device error {0}. [olive]Buffered OS reads are not working, trying direct commands.[/] ERROR: Could not read from device, device error {0}. Device error {0} trying to read from device. [slateblue1]Device can read [violet]{0}[/] blocks at a time using OS buffered reads.[/] [slateblue1]Device can read [violet]{0}[/] blocks using sequential commands.[/] Cannot write CID to output image. Cannot write CSD to output image. Cannot write Extended CSD to output image. Cannot write OCR to output image. Cannot write SCR to output image. [red]Drive has status error, please correct. Sense follows...[/] [blue]Rewinding, [italic]please wait[/]...[/] [red]Drive could not rewind, please correct. Sense follows...[/] [red]Could not get position. Sense follows...[/] [blue]Drive not in partition [teal]0[/]. Rewinding, [italic]please wait[/]...[/] Drive could not rewind to partition 0 but no error occurred... [red]Drive could not return back. Sense follows...[/] [red]Drive could not read. Sense follows...[/] [slateblue1]Blocksize changed to [green]{0}[/] bytes at block [lime]{1}[/][/] [red]Drive could not go back one block. Sense follows...[/] [red]Cannot read device, don't know why, exiting...[/] [slateblue1]Positioning tape to block [lime]1[/].[/] [fuchsia]LOCATE LONG[/] [slateblue1]works.[/] [fuchsia]LOCATE[/] [slateblue1]works.[/] [slateblue1]Positioning tape to block [lime]{0}[/].[/] [red]Could not check current position, unable to resume. If you want to continue use force.[/] [olive]Could not check current position, unable to resume. Dumping from the start.[/] [red]Current position is not as expected, unable to resume. If you want to continue use force.[/] [olive]Current position is not as expected, unable to resume. Dumping from the start.[/] [red]Cannot reposition tape, unable to resume. If you want to continue use force.[/] [olive]Cannot reposition tape, unable to resume. Dumping from the start.[/] [red]Error setting output image in tape mode, not continuing.[/] [slateblue1]Finished partition [teal]{0}[/][/] [slateblue1]Seeking to partition [teal]{0}[/][/] Reading block {0} ({1}) [red]Cannot dump a blank tape...[/] [olive]Found end-of-tape/partition...[/] [olive]Blank block found, end of tape?...[/] [slateblue1]Changed to file [teal]{0}[/] at block [violet]{1}[/][/] [red]Drive could not read block [lime]{0}[/]. Sense cannot be decoded, look at log for dump...[/] [red]Drive could not read block [lime]{0}[/]. Sense bytes follow...[/] [red]Drive could not read block [lime]{0}[/]. Sense follows... [green]{1}[/] [navy]{2}[/][/] [red]Drive could not read block [lime]{0}[/]. Sense follows...[/] [olive]Could not check current position, continuing.[/] [olive]Current position is not as expected, continuing.[/] [red]Cannot position tape to block [lime]{0}[/].[/] Block {0} could not be read. [red]Because of the commands sent to a device, dumping XGD must be done with administrative privileges. Cannot continue.[/] [red]Cannot dump XGD without administrative privileges.[/] [red]Cannot get disc capacity.[/] [red]Cannot get PFI.[/] [slateblue1]Reading Xbox Security Sector.[/] [red]Cannot get Xbox Security Sector, not continuing.[/] [slateblue1]Decoding Xbox Security Sector.[/] [red]Cannot decode Xbox Security Sector, not continuing.[/] [slateblue1]Getting video partition size[/] Locking drive. [red]Cannot lock drive, not continuing.[/] [slateblue1]Video partition total size: [violet]{0}[/] sectors[/] [red]Cannot get DMI.[/] [red]Video partition is too big, did lock work? Trying cold values.[/] [red]Cannot get video partition size, not continuing. Try to eject and reinsert the disc, if it keeps happening, contact support.[/] [slateblue1]Getting game partition size.[/] [slateblue1]Unlocking drive (Xtreme).[/] [red]Cannot unlock drive, not continuing.[/] [slateblue1]Game partition total size: [violet]{0}[/] sectors[/] [slateblue1]Getting middle zone size[/] [slateblue1]Unlocking drive (Wxripper).[/] [slateblue1]Getting disc size.[/] [slateblue1]Unlocked total size: [violet]{0}[/] sectors[/] [red]Cannot decode PFI.[/] [slateblue1][italic]WxRipper[/] PFI's Data Area Start PSN: [lime]{0}[/lime] sectors[/] [slateblue1][italic]WxRipper[/] PFI's Layer [teal]0[/] End PSN: [lime]{0}[/] sectors[/] [slateblue1]Video layer [teal]0[/] size: [violet]{0}[/] sectors[/] [slateblue1]Video layer [teal]1[/] size: [violet]{0}[/] sectors[/] [slateblue1]Middle zone size: [violet]{0}[/] sectors[/] [slateblue1]Game data size: [violet]{0}[/] sectors[/] [slateblue1]Total size: [violet]{0}[/] sectors[/] [slateblue1]Real layer break: [lime]{0}[/][/] [red]Cannot read medium, aborting scan...[/] [slateblue1]Using [fuchsia]SCSI READ (12)[/] command.[/] [slateblue1]Reading game partition.[/] [slateblue1]Writing Middle Zone D (empty).[/] [slateblue1]Reading Video Layer 1.[/] Error code = {0} Error {0} querying ATA IDENTIFY Error {0} querying ATA PACKET IDENTIFY SCSI error: {0} Unknown device type {0}, cannot get information. Trying READ SECTOR(S) in CHS mode... Sense = {0}, Status = 0x{1:X2}, Error = 0x{2:X2}, Length = {3} Trying READ SECTOR(S) RETRY in CHS mode... Trying READ DMA in CHS mode... Trying READ DMA RETRY in CHS mode... Trying SEEK in CHS mode... Sense = {0}, Status = 0x{1:X2}, Error = 0x{2:X2} Trying READ SECTOR(S) in LBA mode... Trying READ SECTOR(S) RETRY in LBA mode... Trying READ DMA in LBA mode... Trying READ DMA RETRY in LBA mode... Trying SEEK in LBA mode... Trying READ SECTOR(S) in LBA48 mode... Trying READ DMA in LBA48 mode... Trying READ LONG in CHS mode... Trying READ LONG RETRY in CHS mode... Trying READ LONG in LBA mode... Trying READ LONG RETRY in LBA mode... Have you previously tried with a GD-ROM disc and did the computer hang or crash? (Y/N): [green]Ejecting disc...[/] Please insert trap disc inside... Press any key to continue... Sending READ FULL TOC to the device... READ FULL TOC failed... Could not decode TOC... [red]Cannot find lead-out...[/] Trap disc shows {0} sectors... Trap disc doesn't have enough sectors... Stopping motor... Please MANUALLY get the trap disc out and put the GD-ROM disc inside... Waiting 5 seconds... Lead-Out has changed, this drive does not support hot swapping discs... Reading LBA 0... Success! FAIL! Reading LBA 0 as audio (scrambled)... Reading LBA 100000 as audio... Reading LBA 50000 as audio... Reading LBA 450000 as audio... Reading LBA 400000 as audio... Reading LBA 45000 as audio... Reading LBA 44990 as audio... Reading LBA 100000 as audio with PQ subchannel... Reading LBA 50000 as audio with PQ subchannel... Reading LBA 450000 as audio with PQ subchannel... Reading LBA 400000 as audio with PQ subchannel... Reading LBA 45000 as audio with PQ subchannel... Reading LBA 44990 as audio with PQ subchannel... Reading LBA 100000 as audio with RW subchannel... Reading LBA 50000 as audio with RW subchannel... Reading LBA 450000 as audio with RW subchannel... Reading LBA 400000 as audio with RW subchannel... Reading LBA 45000 as audio with RW subchannel... Reading LBA 44990 as audio with RW subchannel... Reading LBA 100000... Reading LBA 50000... Reading LBA 450000... Reading LBA 400000... Reading LBA 45000... Reading LBA 44990... Reading LBA 100000 with PQ subchannel... Reading LBA 50000 with PQ subchannel... Reading LBA 450000 with PQ subchannel... Reading LBA 400000 with PQ subchannel... Reading LBA 45000 with PQ subchannel... Reading LBA 44990 with PQ subchannel... Reading LBA 100000 with RW subchannel... Reading LBA 50000 with RW subchannel... Reading LBA 450000 with RW subchannel... Reading LBA 400000 with RW subchannel... Reading LBA 45000 with RW subchannel... Reading LBA 44990 with RW subchannel... The next part of the test will read the whole high density area of a GD-ROM from the smallest known readable sector until the first error happens Do you want to proceed? (Y/N): Reading LBA {0} of {1} Querying MMC GET CONFIGURATION... Querying SCSI READ CAPACITY... Querying SCSI READ CAPACITY (16)... Querying SCSI MODE SENSE (10)... Querying SCSI MODE SENSE... Querying CD TOC... Querying CD Full TOC... Querying CD ATIP... Querying CD PMA... Sense = {0} Querying DVD PFI... Querying DVD DMI... Querying DVD CMI... Querying DVD BCA... Querying DVD AACS... Querying BD BCA... Querying Disc Definition Structure... Querying Spare Area Information... Querying BD DDS... Querying BD SAI... Querying DVD PRI... Querying DVD Media ID... Querying DVD Embossed PFI... Querying DVD ADIP... Querying DVD DCB... Querying HD DVD CMI... Querying DVD Layer Capacity... Querying BD Disc Information... Querying BD PAC... Trying SCSI READ CD scrambled... Trying SCSI READ (6)... Trying SCSI READ (10)... Trying SCSI READ (12)... Trying SCSI READ (16)... Trying SCSI READ CD... Trying SCSI READ CD MSF... Trying SCSI READ CD full sector... Trying SCSI READ CD MSF full sector... Trying to read CD Track 1 pre-gap... Trying to read CD Lead-In... Trying to read CD Lead-Out... Trying to read C2 Pointers... Trying to read subchannels... Trying to read subchannels with C2 Pointers... Trying Plextor READ CD-DA... Trying Pioneer READ CD-DA... Trying Pioneer READ CD-DA MSF... Trying NEC READ CD-DA... Trying Plextor trick to raw read DVDs... Trying HL-DT-ST (aka LG) trick to raw read DVDs... Trying Lite-On trick to raw read DVDs... Trying MediaTek READ DRAM command... Trying MediaTek READ DRAM command for Lead-Out... Could not find second session. Have you inserted the correct type of disc? First session Lead-Out starts at {0:D2}:{1:D2}:{2:D2} Second session starts at {0:D2}:{1:D2}:{2:D2} Trying SCSI READ CD in first session Lead-Out... Trying SCSI READ CD in second session Lead-In... Querying SCSI INQUIRY... Querying list of SCSI EVPDs... Querying SCSI EVPD pages... Querying SCSI EVPD {0:X2}h... Querying all mode pages and subpages using SCSI MODE SENSE (10)... Querying all mode pages and subpages using SCSI MODE SENSE (6)... Trying SCSI READ MEDIA SERIAL NUMBER... Trying to get CID... CID obtained correctly... Could not read CID... Trying to get CSD... CSD obtained correctly... Could not read CSD... Trying to get OCR... OCR obtained correctly... Could not read OCR... Trying to get Extended CSD... Extended CSD obtained correctly... Could not read Extended CSD... Trying to get SCR... SCR obtained correctly... Could not read SCR... Querying SCSI READ BLOCK LIMITS... Querying SCSI REPORT DENSITY SUPPORT... Querying SCSI REPORT DENSITY SUPPORT for medium types... Querying SCSI REPORT DENSITY SUPPORT for current media... Querying SCSI REPORT DENSITY SUPPORT for medium types for current media... [slateblue1]Seeking to sector [lime]{0}[/]...[/] [slateblue1]Seeking to cylinder [lime]{0}[/], head [lime]{1}[/], sector [lime]{2}[/]...[/] Scanning will never be supported on SCSI Streaming Devices. It has no sense to do it, and it will put too much strain on the tape. Error trying to decode TOC... [slateblue1]Using [fuchsia]MMC READ CD[/] command.[/] READ CD error: {0} [slateblue1]Environment does not support setting block count, downgrading to OS reading.[/] [slateblue1]Reading [violet]{0}[/] sectors at a time using OS buffered reads.[/] [slateblue1]Reading [violet]{0}[/] sectors using sequential single commands.[/] Unknown device type {0}. [red]Device needs 48-bit LBA commands but I can't issue them... Aborting.[/] [red]Device needs 28-bit LBA commands but I can't issue them... Aborting.[/] [red]Device needs CHS commands but I can't issue them... Aborting.[/] [slateblue1]Using [fuchsia]ATA READ DMA EXT[/] command.[/] [slateblue1]Using [fuchsia]ATA READ EXT[/] command.[/] [slateblue1]Using [fuchsia]ATA READ DMA[/] command with retries (LBA).[/] [slateblue1]Using [fuchsia]ATA READ DMA[/] command (LBA).[/] [slateblue1]Using [fuchsia]ATA READ[/] command with retries (LBA).[/] [slateblue1]Using [fuchsia]ATA READ[/] command (LBA).[/] [slateblue1]Using [fuchsia]ATA READ DMA[/] command with retries (CHS).[/] [slateblue1]Using [fuchsia]ATA READ DMA[/] command (CHS).[/] [slateblue1]Using [fuchsia]ATA READ[/] command with retries (CHS).[/] [slateblue1]Using [fuchsia]ATA READ[/] command (CHS).[/] [red]Could not get a working read command![/] ATA ERROR: {0} STATUS: {1} Device only supports SCSI READ (6) but has more than {0} blocks ({1} blocks total) Device only supports SCSI READ (10) but has more than {0} blocks ({1} blocks total) [slateblue1]Using [fuchsia]SCSI READ LONG (16)[/] command.[/] [slateblue1]Using [fuchsia]SCSI READ LONG (10)[/] command.[/] [slateblue1]Using [fuchsia]SyQuest READ LONG (10)[/] command.[/] [slateblue1]Using [fuchsia]SyQuest READ LONG (6)[/] command[/] [slateblue1]Using [fuchsia]HL-DT-ST raw DVD[/] reading.[/] [slateblue1]Using [fuchsia]Plextor raw DVD[/] reading.[/] [slateblue1]Using [fuchsia]SCSI READ (6)[/] command.[/] [slateblue1]Using [fuchsia]SCSI READ (10)[/] command.[/] [slateblue1]Using [fuchsia]SCSI READ (16)[/] command.[/] Unable to get media capacity {0} Start logging at {0} Running as superuser: Yes Running as superuser: No ################# Remote information ################# Server: {0} Version: {0} Operating system: {0} {1} Architecture: {0} Protocol version: {0} ###################################################### ################# Device information ################# Manufacturer: {0} Model: {0} Firmware revision: {0} Serial number: {0} Removable device: {0} Device type: {0} CompactFlash device: {0} PCMCIA device: {0} USB device: {0} USB manufacturer: {0} USB product: {0} USB serial: {0} USB vendor ID: {0:X4}h USB product ID: {0:X4}h FireWire device: {0} FireWire vendor: {0} FireWire model: {0} FireWire GUID: 0x{0:X16} FireWire vendor ID: 0x{0:X8} FireWire product ID: 0x{0:X8} ################ Dumping progress log ################ End logging on {0} Start error logging on {0} ATA command {0} operating system error: {1}. ATA command {0} error: status = {1}, error = {2}. ATA reading C/H/S {0}/{1}/{2} operating system error: {3}. ATA reading C/H/S {0}/{1}/{2} error: status = {3}, error = {4}. ATA reading LBA {0} operating system error: {1}. ATA reading LBA {0} error: status = {1}, error = {2}. SCSI command {0} operating system error: {1}. SCSI command {0} error: SENSE {1} ASC {2:X2}h ASCQ {3:X2}h, {4}, {5}. SCSI command {0} error: SENSE {1} ASC {2:X2}h ASCQ {3:X2}h, {4}. SCSI command {0} error: {1}, {2}. SCSI command {0} error: {1} SCSI reading LBA {0} operating system error: {1}. SCSI reading LBA {0} error: SENSE {1} ASC {2:X2}h ASCQ {3:X2}h, {4}, {5}. SCSI reading LBA {0} error: SENSE {1} ASC {2:X2}h ASCQ {3:X2}h, {4}. SCSI reading LBA {0} error: {1}, {2}. SCSI reading LBA {0} error: {1} SD/MMC command {0} operating system error: {1}. SD/MMC command {0} error: {1} SD/MMC reading LBA {0} (byte-addressed) operating system error: {1}. SD/MMC reading LBA {0} (byte-addressed) error: {1} SD/MMC reading LBA {0} (block-addressed) operating system error: {1}. SD/MMC reading LBA {0} (block-addressed) error: {1} Start subchannel logging at {0} Data length is invalid! (GENERATED) A space must be before the parenthesis (FIXED) A space must be before the parenthesis fixed P subchannel using weight average. fixed R-W subchannels writing empty data. fixed Q subchannel with correct ADR. fixed Q subchannel with correct CONTROL. fixed Q subchannel with correct ZERO. fixed Q subchannel with correct TNO. fixed Q subchannel with correct INDEX. fixed Q subchannel with correct RELATIVE POSITION. fixed Q subchannel with correct ABSOLUTE POSITION. fixed Q subchannel with correct CRC. fixed Q subchannel with known good MCN. fixed Q subchannel with known good ISRC. Lead-In Program {0:D2}:{1:D2}:{2:D2} - LBA {3,6}: {4} area, {5} TOC says disc type is CD-i. TOC says disc type is CD-ROM XA. Disc has audio and data tracks, two sessions, and all data tracks are in second session, setting as CD+. Disc has only audio tracks in a single session, setting as CD Digital Audio. Disc has only data tracks in a single session, setting as CD-ROM. Disc has video tracks in a single session, setting as CD Video. Disc has a mode 2 data track, setting as CD-ROM XA. Disc has a hidden CD-i track in track 1's pregap, setting as CD-i Ready. Found Photo CD description file, setting disc type to Photo CD. Found Mega/Sega CD IP.BIN, setting disc type to Mega CD. Found Sega Saturn IP.BIN, setting disc type to Saturn CD. Found Sega Dreamcast IP.BIN, setting disc type to GD-ROM. PlayStation 2 boot sectors SHA256: {0} Found Sony PlayStation 2 boot sectors, setting disc type to PS2 CD. Found Opera filesystem, setting disc type to 3DO. Found FM-Towns boot, setting disc type to FM-Towns. Found Playdia copyright, setting disc type to Playdia. Found PC-Engine CD signature, setting disc type to Super CD-ROM². Found PC-FX copyright, setting disc type to PC-FX. Found Atari signature, setting disc type to Jaguar CD. Found Sega Dreamcast IP.BIN on second session, setting disc type to MilCD. Found VideoNow! Color frame, setting disc type to VideoNow Color. Found enhanced graphics RW packet, setting disc type to CD+EG. Found graphics RW packet, setting disc type to CD+G. Found MIDI RW packet, setting disc type to CD+MIDI. Found CD32.TM file in root, setting disc type to Amiga CD32. Found CDTV.TM file in root, setting disc type to Commodore CDTV. Found correct IPL.TXT file in root, setting disc type to Neo Geo CD. Found Video CD description file, setting disc type to Video CD. Found Super Video CD description file, setting disc type to Super Video CD. Found China Video Disc description file, setting disc type to China Video Disc. Found correct SYSTEM.CNF file in root pointing to existing file in root, setting disc type to PlayStation CD. Found correct SYSTEM.CNF file in root pointing to existing file in root, setting disc type to PlayStation 2 CD. Found Sony PlayStation 2 boot sectors, setting disc type to PS2 DVD. Found Sony PlayStation 3 boot sectors, setting disc type to PS3 Blu-ray. Found Sony PlayStation 3 boot sectors, setting disc type to PS3 DVD. Found Sony PlayStation 4 boot sectors, setting disc type to PS4 Blu-ray. Blu-ray type set to "XG4", setting disc type to Xbox One Disc (XGD4). Found Sony PlayStation 5 boot sectors, setting disc type to PS5 Ultra HD Blu-ray. Blu-ray type set to "BDU", setting disc type to Ultra HD Blu-ray. [olive]Could not find VideoNow Color frame offset, dump may not be correct.[/] [slateblue1]VideoNow Color frame is offset [lime]{0}[/] bytes.[/] READ DISC STRUCTURE: Recognized Format Layers {0} READ DISC STRUCTURE: Write Protection Status {0} READ DISC STRUCTURE: PFI {0} READ DISC STRUCTURE: DMI {0} READ DISC STRUCTURE: CMI {0} READ DISC STRUCTURE: BCA {0} READ DISC STRUCTURE: DVD AACS {0} READ DISC STRUCTURE: DDS {0} READ DISC STRUCTURE: Medium Status {0} READ DISC STRUCTURE: SAI {0} READ DISC STRUCTURE: Last-Out Border RMD {0} READ DISC STRUCTURE: Disc Key {0} READ DISC STRUCTURE: Sector CMI {0} READ DISC STRUCTURE: Pre-Recorded Info {0} READ DISC STRUCTURE: DVD-R Media ID {0} READ DISC STRUCTURE: DVD-R PFI {0} READ DISC STRUCTURE: ADIP {0} READ DISC STRUCTURE: DCB {0} READ DISC STRUCTURE: HD DVD CMI {0} READ DISC STRUCTURE: HD DVD-R Medium Status {0} READ DISC STRUCTURE: Last RMD {0} READ DISC STRUCTURE: Layer Capacity {0} READ MEDIA SERIAL NUMBER {0} READ DISC STRUCTURE: Middle Zone Start {0} READ DISC STRUCTURE: Jump Interval Size {0} READ DISC STRUCTURE: Manual Layer Jump Start LBA {0} READ DISC STRUCTURE: Remap Anchor Point {0} READ DISC STRUCTURE: DI {0} READ DISC STRUCTURE: PAC {0} READ DISC STRUCTURE: Cartridge Status {0} READ DISC STRUCTURE: Raw DFL {0} READ DISC INFORMATION 001b {0} READ DISC INFORMATION 010b {0} READ TOC/PMA/ATIP: TOC {0} READ TOC/PMA/ATIP: ATIP {0} READ TOC/PMA/ATIP: Session info {0} READ TOC/PMA/ATIP: Raw TOC {0} READ TOC/PMA/ATIP: PMA {0} READ TOC/PMA/ATIP: CD-TEXT {0} KREON EXTRACT SS: {0} READ DISC INFORMATION 000b {0} [slateblue1]Found new [italic]ISRC[/] [italic][navy]{0}[/][/] for track [teal]{1}[/].[/] [yellow][italic]ISRC[/] for track [teal]{0}[/] changed from [italic][navy]{1}[/][/] to [italic][navy]{2}[/][/].[/] [slateblue1]Found new [italic]MCN[/] [italic][teal]{0}[/][/].[/] [yellow][italic]MCN[/] changed from [italic][teal]{0}[/][/] to [italic][teal]{1}[/][/].[/] [slateblue1]Pregap for track [teal]{0}[/] set to [violet]{1}[/] sectors.[/] [slateblue1]Setting index [green]{0}[/] for track [teal]{1}[/] to LBA [lime]{2}[/].[/] [olive]Generating subchannel for sector [violet]{0}[/]...[/] [slateblue1]Hashing media tags...[/] [red]Error [orange3]{0}[/] reading sector [lime]{1}[/][/] [slateblue1]Hashing sector [lime]{0}[/] of [violet]{1}[/][/] Hashing partition {0}... [slateblue1]Hashing blocks [lime]{0}[/] of [violet]{1}[/][/] [slateblue1]Hashing file [green]{0}[/]... [slateblue1]Checking filesystems...[/] [slateblue1]Mounting [fuchsia]{0}[/][/] [slateblue1]Saving metadata...[/] Hashing SuperCardPro image... SuperCardPro image do not contain same number of tracks ({0}) than disk image ({1}), ignoring... SuperCardPro image do not contain same number of heads ({0}) than disk image ({1}), ignoring... Hashing KryoFlux images... KryoFlux image does not contain same number of tracks ({0}) than disk image ({1}), ignoring... KryoFlux image does not contain same number of heads ({0}) than disk image ({1}), ignoring... Hashing DiscFerret image... DiscFerret image do not contain same number of tracks ({0}) than disk image ({1}), ignoring... DiscFerret image do not contain same number of heads ({0}) than disk image ({1}), ignoring... Cannot stat {0} [slateblue1]Hashing file [teal]{0}/{1}[/]...[/] [slateblue1]Hashing file byte [lime]{0}[/] of [violet]{1}[/][/] [slateblue1]Track [teal]{0}[/] of [aqua]{1}[/][/] [slateblue1]Hashing subchannel sector [lime]{0}[/] of [violet]{1}[/][/] [slateblue1]Hashing image file...[/] [slateblue1]Hashing image file byte [lime]{0}[/] of [green]{1}[/][/] The specified image says it contains an optical media but at the same time says it does not support them. The specified image says it contains a block addressable media but at the same time says it does not support them. Please open an issue at Github. The specified image says it contains a byte addressable media but at the same time says it does not support them. Not overwriting file {0} Writing {0} to {1} Unable to write file {0} [slateblue1]Sectors [lime]{0}[/][/] [slateblue1]Entropying sector [lime]{0}[/][/] Error {0} while reading sector {1}, continuing... {0} bytes The selected image format does not support tracks. [slateblue1]Entropying track [lime]{0}[/] of [teal]{1}[/][/] Track {0} has {1} sectors [slateblue1]Entropying sector [lime]{0}[/] of track [teal]{1}[/][/] Unable to get separate tracks, not calculating their entropy Error {0} while reading data, not continuing... Unknown error code {0} The specified device cannot be found. Not enough permissions to open the device. The specified device is in use by another process. [red]Cannot open the device in writable mode, as needed by some commands.[/] Tried to open a file instead of a device. Trying plugin {0} [bold][darkgreen]Index[/][/] [bold][blue]Image indexes[/][/] Found {0} @ {1} Found {0} @ 0 Trying {0} @ {1} Got {0} children Got {0} parents Got {0} partitions Found unknown vendor mode page {0:X2}h subpage {1:X2}h Found unknown vendor mode page {0:X2}h Found unknown mode page {0:X2}h subpage {1:X2}h Found unknown mode page {0:X2}h Uploading device report [slateblue1]Creating main database[/] Updating main database Last update: {0} Error {0} when trying to get updated entities. [slateblue1]Adding USB vendors[/] [slateblue1]Added [green]{0}[/] USB vendors[/] [slateblue1]Adding USB products[/] [slateblue1]Added [green]{0}[/] USB products[/] [slateblue1]Adding CompactDisc read offsets[/] [slateblue1]Added [green]{0}[/] CompactDisc read offsets[/] [slateblue1]Adding known devices[/] [slateblue1]Added [green]{0}[/] known devices[/] [slateblue1]Adding known iNES/NES 2.0 headers[/] [slateblue1]Added [green]{0}[/] known iNES/NES 2.0 headers[/] Updating USB vendors Modified {0} USB vendors Updating USB products Modified {0} USB products Updating CompactDisc read offsets Modified {0} CompactDisc read offsets Updating known devices Modified {0} known devices Updating known iNES/NES 2.0 headers Modified {0} known iNES/NES 2.0 headers Exception {0} when updating database. Saving changes... Exception while trying to save statistics: Uploading statistics Uploading partial statistics file {0} [slateblue1]Was created with [italic][rosybrown]{0}[/][/] version [italic][rosybrown]{1}[/][/][/] [slateblue1][bold]Created by:[/][/] [green]{0}[/] [green]Has partitions[/] [red]Doesn't have partitions[/] [green]Has sessions[/] [red]Doesn't have sessions[/] [slateblue1][bold]Comments:[/][/] {0} [bold][slateblue1]Media title:[/][/] [italic]{0}[/] [bold][slateblue1]Media manufacturer:[/][/] [italic]{0}[/] [bold][slateblue1]Media model:[/][/] [italic]{0}[/] [bold][slateblue1]Media serial number:[/][/] [italic]{0}[/] [bold][slateblue1]Media barcode:[/][/] [italic]{0}[/] [bold][slateblue1]Media part number:[/][/] [italic]{0}[/] [bold][slateblue1]Drive manufacturer:[/][/] [italic]{0}[/] [bold][slateblue1]Drive model:[/][/] [italic]{0}[/] [bold][slateblue1]Drive firmware info:[/][/] [italic]{0}[/] [bold][slateblue1]Media geometry:[/] [italic][teal]{0}[/] cylinders, [teal]{1}[/] heads, [teal]{2}[/] sectors per track[/][/] [bold][blue]Contains [teal]{0}[/] readable media tags:[/][/] [bold][blue]Contains [teal]{0}[/] readable sector tags:[/][/] [bold][navy]Manufacturer[/][/] [bold][navy]Model[/][/] [bold][fuchsia]Serial[/][/] As in serial number [bold][red3]Software[/][/] [bold][red3]Version[/][/] [bold][red3]Operating system[/][/] [bold][blue]Dump hardware information[/][/] [bold][blue]Mapping:[/][/] [bold][blue]SCSI INQUIRY contained in image:[/][/] [bold][blue]ATA IDENTIFY contained in image:[/][/] [bold][blue]ATAPI IDENTIFY contained in image:[/][/] [bold][blue]SCSI MODE SENSE (10) contained in image:[/][/] [bold][blue]SCSI MODE SENSE (6) contained in image:[/][/] [bold][blue]CompactDisc Table of Contents contained in image:[/][/] [bold][blue]CompactDisc Absolute Time In Pregroove (ATIP) contained in image:[/][/] [bold][blue]CompactDisc Lead-in's CD-Text contained in image:[/][/] [bold][blue]CompactDisc Media Catalogue Number contained in image:[/][/] [teal]{0}[/] [bold][blue]DVD-R(W) Pre-Recorded Information:[/][/] [bold][blue]DVD Physical Format Information contained in image:[/][/] [bold][blue]DVD-RAM Disc Definition Structure contained in image:[/][/] [bold][blue]DVD-R Physical Format Information contained in image:[/][/] [bold][blue]Blu-ray Disc Information contained in image:[/][/] [bold][blue]Blu-ray Disc Definition Structure contained in image:[/][/] [bold][blue]PCMCIA CIS:[/][/] [bold][blue]SecureDigital CID contained in image:[/][/] [bold][blue]SecureDigital CSD contained in image:[/][/] [bold][blue]SecureDigital SCR contained in image:[/][/] [bold][blue]SecureDigital OCR contained in image:[/][/] [bold][blue]MultiMediaCard CID contained in image:[/][/] [bold][blue]MultiMediaCard CSD contained in image:[/][/] [bold][blue]MultiMediaCard Extended CSD contained in image:[/][/] [bold][blue]MultiMediaCard OCR contained in image:[/][/] [bold][blue]Xbox Physical Format Information contained in image:[/][/] [bold][blue]Xbox DMI contained in image:[/][/] [bold][blue]Xbox 360 DMI contained in image:[/][/] [bold][blue]Xbox Security Sectors contained in image:[/][/] [bold][blue]Image tracks[/][/] [bold][blue]Image sessions[/][/] Please write a description of the media type and press enter: Please write the media model and press enter: Error: {0} [olive][bold]WARNING:[/] The drive has returned incorrect Q positioning when calculating pregaps. A best effort has been tried but they may be incorrect.[/] [red]Output format does not support sessions, this will end in a loss of data, not continuing...[/] [red]Error [orange3]{0}[/] setting metadata, continuing...[/] Could not read subchannel for this track, supposing 0 sectors. ################# System information ################# ################# Program information ################ Running in {0}-bit DEBUG version Command line: {0} [slateblue1]Hashing sectors...[/] [slateblue1]Hashing files...[/] [slateblue1]Hashing tracks...[/] Could not get tracks because {0} {0} is exception message Found undecoded tuple ID {0} Found unknown tuple ID 0x{0:X2} Could not get tuples [bold][orange3]Type[/][/] [bold][blue]Image information:[/][/] [bold][slateblue1]Format:[/][/] [italic][rosybrown]{0}[/][/] [slateblue1]version[/] [rosybrown]{1}[/] [bold][slateblue1]Format:[/][/] [italic][rosybrown]{0}[/][/] [slateblue1]Was created with [italic][rosybrown]{0}[/][/][/] [slateblue1]Contains a media of type [italic][fuchsia]{0}[/][/] and XML type [italic][rosybrown]{1}[/][/][/] [bold]Drive serial number:[/] [italic]{0}[/] [bold][blue]CompactDisc Program Memory Area contained in image:[/][/] [red]Output format does not properly support storing hidden tracks, this will end in a loss of data, not continuing...[/] This image contains low-level flux captures. [bold][blue]Archive information:[/][/] [slateblue1]Using [fuchsia]Lite-On raw DVD[/] reading[/] Error identifying filesystem {0}. Please open a report with the following line in a Github issue. Blu-ray type set to "BDR", setting disc type to BD-R. Running in {0} architecture [slateblue1]Cartridge has [lime]{0} bytes[/] ([lime]{1}[/]).[/] [slateblue1]Contains a media of [lime]{0}[/] sectors[/] [slateblue1]Maximum sector size of [teal]{0}[/] bytes[/] [slateblue1]Would be [aqua]{0}[/][/] [slateblue1]Contains a media of type[/] [italic][fuchsia]{0}[/][/] [slateblue1]XML type:[/] [italic][rosybrown]{0}[/][/] Media identified as [bold][blue]DVD 2nd layer Physical Format Information contained in image:[/][/]