86Box/src/sio/sio_82091aa.c

/*
 * 86Box	A hypervisor and IBM PC system emulator that specializes in
 *		running old operating systems and software designed for IBM
 *		PC systems and compatibles from 1981 through fairly recent
 *		system designs based on the PCI bus.
 *
 *		This file is part of the 86Box distribution.
 *
 *		Emulation of the Intel 82091AA Super I/O chip.
 *
 *
 *
 * Author:	Miran Grca, <mgrca8@gmail.com>
 *		Copyright 2020 Miran Grca.
 */
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <wchar.h>
#include <86box/86box.h>
#include <86box/io.h>
#include <86box/timer.h>
#include <86box/device.h>
#include <86box/lpt.h>
#include <86box/mem.h>
#include <86box/nvr.h>
#include <86box/pci.h>
#include <86box/rom.h>
#include <86box/serial.h>
#include <86box/hdc.h>
#include <86box/hdc_ide.h>
#include <86box/fdd.h>
#include <86box/fdc.h>
#include <86box/sio.h>


typedef struct {
    uint8_t	cur_reg, has_ide,
		regs[81];
    uint16_t	base_address;
    fdc_t *	fdc;
    serial_t *	uart[2];
} i82091aa_t;


static void
fdc_handler(i82091aa_t *dev)
{
    fdc_remove(dev->fdc);
    if (dev->regs[0x10] & 0x01)
	fdc_set_base(dev->fdc, (dev->regs[0x10] & 0x02) ? FDC_SECONDARY_ADDR : FDC_PRIMARY_ADDR);
}


static void
lpt1_handler(i82091aa_t *dev)
{
    uint16_t lpt_port = LPT1_ADDR;

    lpt1_remove();

    switch ((dev->regs[0x20] >> 1) & 0x03) {
	case 0x00:
		lpt_port = LPT1_ADDR;
		break;
	case 1:
		lpt_port = LPT2_ADDR;
		break;
	case 2:
		lpt_port = LPT_MDA_ADDR;
		break;
	case 3:
		lpt_port = 0x000;
		break;
    }

    if ((dev->regs[0x20] & 0x01) && lpt_port)
	lpt1_init(lpt_port);

    lpt1_irq((dev->regs[0x20] & 0x08) ? LPT1_IRQ : LPT2_IRQ);
}


static void
serial_handler(i82091aa_t *dev, int uart)
{
    int reg = (0x30 + (uart << 4));
    uint16_t uart_port = COM1_ADDR;

    serial_remove(dev->uart[uart]);

    switch ((dev->regs[reg] >> 1) & 0x07) {
	case 0x00:
		uart_port = COM1_ADDR;
		break;
	case 0x01:
		uart_port = COM2_ADDR;
		break;
	case 0x02:
		uart_port = 0x220;
		break;
	case 0x03:
		uart_port = 0x228;
		break;
	case 0x04:
		uart_port = 0x238;
		break;
	case 0x05:
		uart_port = COM4_ADDR;
		break;
	case 0x06:
		uart_port = 0x338;
		break;
	case 0x07:
		uart_port = COM3_ADDR;
		break;
    }

    if (dev->regs[reg] & 0x01)
	serial_setup(dev->uart[uart], uart_port, (dev->regs[reg] & 0x10) ? COM1_IRQ : COM2_IRQ);
}


static void
ide_handler(i82091aa_t *dev)
{
    ide_sec_disable();
    ide_set_base(1, (dev->regs[0x50] & 0x02) ? 0x170 : 0x1f0);
    ide_set_side(1, (dev->regs[0x50] & 0x02) ? 0x376 : 0x3f6);
    if (dev->regs[0x50] & 0x01)
	ide_sec_enable();
}


static void
i82091aa_write(uint16_t port, uint8_t val, void *priv)
{
    i82091aa_t *dev = (i82091aa_t *) priv;
    uint8_t index, valxor;
    uint8_t uart = (dev->cur_reg >> 4) - 0x03;
    uint8_t *reg = &(dev->regs[dev->cur_reg]);

    index = (port & 1) ? 0 : 1;

    if (index) {
	dev->cur_reg = val;
	return;
    } else if (dev->cur_reg < 0x51)
	valxor = val ^ *reg;
    else if (dev->cur_reg >= 0x51)
	return;

    switch(dev->cur_reg) {
	case 0x02:
		*reg = (*reg & 0x78) | (val & 0x01);
		break;
	case 0x03:
		*reg = (val & 0xf8);
		break;
	case 0x10:
		*reg = (val & 0x83);
		if (valxor & 0x03)
			fdc_handler(dev);
		break;
	case 0x11:
		*reg = (val & 0x0f);
		if ((valxor & 0x04) && (val & 0x04))
			fdc_reset(dev->fdc);
		break;
	case 0x20:
		*reg = (val & 0xef);
		if (valxor & 0x07)
			lpt1_handler(dev);
		break;
	case 0x21:
		*reg = (val & 0x2f);
		break;
	case 0x30: case 0x40:
		*reg = (val & 0x9f);
		if (valxor & 0x1f)
			serial_handler(dev, uart);
		if (valxor & 0x80)
			serial_set_clock_src(dev->uart[uart], (val & 0x80) ? 2000000.0 : (24000000.0 / 13.0));
		break;
	case 0x31: case 0x41:
		*reg = (val & 0x1f);
		if ((valxor & 0x04) && (val & 0x04))
			serial_reset_port(dev->uart[uart]);
		break;
	case 0x50:
		*reg = (val & 0x07);
		if (dev->has_ide && (valxor & 0x03))
			ide_handler(dev);
		break;
    }
}


uint8_t
i82091aa_read(uint16_t port, void *priv)
{
    i82091aa_t *dev = (i82091aa_t *) priv;
    uint8_t ret = 0xff, index;

    index = (port & 1) ? 0 : 1;

    if (index)
	ret = dev->cur_reg;
    else if (dev->cur_reg < 0x51)
	ret = dev->regs[dev->cur_reg];

    return ret;
}


void
i82091aa_reset(i82091aa_t *dev)
{
    memset(dev->regs, 0x00, 81);

    dev->regs[0x00] = 0xa0;
    dev->regs[0x10] = 0x01;
    dev->regs[0x31] = dev->regs[0x41] = 0x02;
    dev->regs[0x50] = 0x01;

    fdc_reset(dev->fdc);

    fdc_handler(dev);
    lpt1_handler(dev);
    serial_handler(dev, 0);
    serial_handler(dev, 1);
    serial_set_clock_src(dev->uart[0], (24000000.0 / 13.0));
    serial_set_clock_src(dev->uart[1], (24000000.0 / 13.0));

    if (dev->has_ide)
	ide_handler(dev);
}


static void
i82091aa_close(void *priv)
{
    i82091aa_t *dev = (i82091aa_t *) priv;

    free(dev);
}


static void *
i82091aa_init(const device_t *info)
{
    i82091aa_t *dev = (i82091aa_t *) malloc(sizeof(i82091aa_t));
    memset(dev, 0, sizeof(i82091aa_t));

    dev->fdc = device_add(&fdc_at_device);

    dev->uart[0] = device_add_inst(&ns16550_device, 1);
    dev->uart[1] = device_add_inst(&ns16550_device, 2);

    dev->has_ide = !!(info->local & 0x200);

    i82091aa_reset(dev);

    dev->regs[0x02] = info->local & 0xff;

    if (info->local & 0x08)
	dev->base_address = (info->local & 0x100) ? 0x0398 : 0x0024;
    else
	dev->base_address = (info->local & 0x100) ? 0x026e : 0x0022;

    io_sethandler(dev->base_address, 0x0002,
		  i82091aa_read, NULL, NULL, i82091aa_write, NULL, NULL, dev);

    return dev;
}

const device_t i82091aa_device = {
    .name = "Intel 82091AA Super I/O",
    .internal_name = "i82091aa",
    .flags = 0,
    .local = 0x40,
    .init = i82091aa_init,
    .close = i82091aa_close,
    .reset = NULL,
    { .available = NULL },
    .speed_changed = NULL,
    .force_redraw = NULL,
    .config = NULL
};

const device_t i82091aa_398_device = {
    .name = "Intel 82091AA Super I/O (Port 398h)",
    .internal_name = "i82091aa_398",
    .flags = 0,
    .local = 0x148,
    .init = i82091aa_init,
    .close = i82091aa_close,
    .reset = NULL,
    { .available = NULL },
    .speed_changed = NULL,
    .force_redraw = NULL,
    .config = NULL
};

const device_t i82091aa_ide_device = {
    .name = "Intel 82091AA Super I/O (With IDE)",
    .internal_name = "i82091aa_ide",
    .flags = 0,
    .local = 0x240,
    .init = i82091aa_init,
    .close = i82091aa_close,
    .reset = NULL,
    { .available = NULL },
    .speed_changed = NULL,
    .force_redraw = NULL,
    .config = NULL
};