86Box/src/include/86box/snd_mpu401.h

/*
 * 86Box	A hypervisor and IBM PC system emulator that specializes in
 *		running old operating systems and software designed for IBM
 *		PC systems and compatibles from 1981 through fairly recent
 *		system designs based on the PCI bus.
 *
 *		This file is part of the 86Box distribution.
 *
 *		Roland MPU-401 emulation.
 *
 *
 *
 * Author:	Sarah Walker, <http://pcem-emulator.co.uk/>
 *		DOSBox Team,
 *		Miran Grca, <mgrca8@gmail.com>
 *		TheCollector1995, <mariogplayer@gmail.com>
 *		Copyright 2008-2020 Sarah Walker.
 *		Copyright 2008-2020 DOSBox Team.
 *		Copyright 2016-2020 Miran Grca.
 *		Copyright 2016-2020 TheCollector1995.
 */

#define MPU401_VERSION	0x15
#define MPU401_REVISION	0x01
#define MPU401_QUEUE 64
#define MPU401_INPUT_QUEUE 1024
#define MPU401_TIMECONSTANT (60000000/1000.0f)
#define MPU401_RESETBUSY 27.0f

/*helpers*/
#define M_GETKEY key[key/32]&(1<<(key%32))
#define M_SETKEY key[key/32]|=(1<<(key%32))
#define M_DELKEY key[key/32]&=~(1<<(key%32))

typedef enum MpuMode
{
    M_UART,
    M_INTELLIGENT
} MpuMode;

#define M_MCA 0x10

typedef enum MpuDataType
{
    T_OVERFLOW,
    T_MARK,
    T_MIDI_SYS,
    T_MIDI_NORM,
    T_COMMAND
} MpuDataType;

typedef enum RecState 
{ 
	M_RECOFF, 
	M_RECSTB,
	M_RECON 
} RecState;

/* Messages sent to MPU-401 from host */
#define MSG_EOX	                        0xf7
#define MSG_OVERFLOW                    0xf8
#define MSG_MARK                        0xfc

/* Messages sent to host from MPU-401 */
#define MSG_MPU_OVERFLOW                0xf8
#define MSG_MPU_COMMAND_REQ             0xf9
#define MSG_MPU_END                     0xfc
#define MSG_MPU_CLOCK                   0xfd
#define MSG_MPU_ACK                     0xfe

typedef struct mpu_t
{
    uint16_t addr;
    int uart_mode, intelligent,
	irq, irq_mask,
	midi_thru,
	queue_pos, queue_used;
    uint8_t rx_data, is_mca,
	    status,
	    queue[MPU401_QUEUE], pos_regs[8];
    MpuMode mode;
    uint8_t rec_queue[MPU401_INPUT_QUEUE];
	int rec_queue_pos, rec_queue_used;
	uint32_t ch_toref[16];
    struct track 
    {
	int counter;
	uint8_t value[3], sys_val,
		vlength,length;
	MpuDataType type;
    } playbuf[8], condbuf;
    struct {
	int conductor, cond_req,
	    cond_set, block_ack,
	    playing, reset,
	    wsd, wsm, wsd_start,
	    run_irq, irq_pending,
		track_req,
	    send_now, eoi_scheduled,
	    data_onoff, clock_to_host,
		sync_in, sysex_in_finished,
		rec_copy;
	RecState rec;
	uint8_t tmask, cmask,
		amask,
		last_rtcmd;
	uint16_t midi_mask, req_mask;
	uint32_t command_byte, cmd_pending,
		track, old_track;
    } state;
    struct {
	uint8_t timebase, old_timebase,
		tempo, old_tempo,
		tempo_rel, old_tempo_rel,
		tempo_grad, cth_rate[4],
		cth_mode, midimetro,
		metromeas;
	uint32_t cth_counter, cth_old,
		rec_counter;
	int32_t measure_counter, meas_old,
		freq;
	int ticks_in, active;
	float freq_mod;
    } clock;
	struct {
	int all_thru, midi_thru,
		sysex_thru, commonmsgs_thru,
		modemsgs_in, commonmsgs_in,
		bender_in, sysex_in,
		allnotesoff_out, rt_affection,
		rt_out, rt_in,
		timing_in_stop, data_in_stop,
		rec_measure_end;
	uint8_t prchg_buf[16];
	uint16_t prchg_mask;
	} filter;
	struct {
	int on;
	uint8_t chan, trmask;
	uint32_t key[4];
	} chanref[5], inputref[16];
	pc_timer_t mpu401_event_callback, mpu401_eoi_callback, 
		   mpu401_reset_callback;
} mpu_t;

extern int	mpu401_standalone_enable, mpu401_already_loaded;

extern const device_t	mpu401_device;
extern const device_t	mpu401_mca_device;


extern uint8_t	MPU401_ReadData(mpu_t *mpu);
extern void 	mpu401_setirq(mpu_t *mpu, int irq);
extern void	mpu401_change_addr(mpu_t *mpu, uint16_t addr);
extern void	mpu401_init(mpu_t *mpu, uint16_t addr, int irq, int mode, int receive_input);
extern void	mpu401_device_add(void);

extern int	MPU401_InputSysex(void *p, uint8_t *buffer, uint32_t len, int abort);
extern void	MPU401_InputMsg(void *p, uint8_t *msg);