Added initial Apollo Pro emulation
- Added the Apollo Pro Northbridge - Added a PC Partner board (APRO + 586B Southbridge) **COMPATIBLE WITH VIA C3!**
This commit is contained in:
tiseno100
GitHub
@@ -66,6 +66,7 @@ extern const device_t sis_85c50x_device;
|
||||
|
||||
/* VIA */
|
||||
extern const device_t via_mvp3_device;
|
||||
extern const device_t via_apro_device;
|
||||
|
||||
/* VLSI */
|
||||
extern const device_t vlsi_scamp_device;
|
||||
|
||||
345
src/chipset/via_apro.c
Normal file
345
src/chipset/via_apro.c
Normal file
@@ -0,0 +1,345 @@
|
||||
/*
|
||||
|
||||
86Box A hypervisor and IBM PC system emulator that specializes in
|
||||
running old operating systems and software designed for IBM
|
||||
PC systems and compatibles from 1981 through fairly recent
|
||||
system designs based on the PCI bus.
|
||||
|
||||
<This file is part of the 86Box distribution.>
|
||||
|
||||
VIA Apollo Pro North Bridge emulation
|
||||
|
||||
VT82C691 used in the PC Partner APAS3 board
|
||||
based on the model of VIA MVP3 by mooch & Sarah
|
||||
|
||||
Authors: Sarah Walker, <http://pcem-emulator.co.uk/>
|
||||
Copyright(C) 2020 Tiseno100
|
||||
Copyright(C) 2020 Melissa Goad
|
||||
Copyright(C) 2020 Miran Grca
|
||||
|
||||
|
||||
Note: Due to 99.9% similarities with the VP3, MVP3 but also other later Apollo chipsets. We probably should create a common Apollo tree
|
||||
just like the Intel 4x0 series.
|
||||
|
||||
*/
|
||||
|
||||
#include <stdio.h>
|
||||
#include <stdint.h>
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
#include <wchar.h>
|
||||
#include "86box.h"
|
||||
#include "mem.h"
|
||||
#include "86box_io.h"
|
||||
#include "rom.h"
|
||||
#include "pci.h"
|
||||
#include "device.h"
|
||||
#include "keyboard.h"
|
||||
#include "chipset.h"
|
||||
|
||||
typedef struct via_apro_t
|
||||
{
|
||||
uint8_t pci_conf[2][256];
|
||||
} via_apro_t;
|
||||
|
||||
static void
|
||||
apro_map(uint32_t addr, uint32_t size, int state)
|
||||
{
|
||||
switch (state & 3) {
|
||||
case 0:
|
||||
mem_set_mem_state(addr, size, MEM_READ_EXTANY | MEM_WRITE_EXTANY);
|
||||
break;
|
||||
case 1:
|
||||
mem_set_mem_state(addr, size, MEM_READ_EXTANY | MEM_WRITE_INTERNAL);
|
||||
break;
|
||||
case 2:
|
||||
mem_set_mem_state(addr, size, MEM_READ_INTERNAL | MEM_WRITE_EXTANY);
|
||||
break;
|
||||
case 3:
|
||||
mem_set_mem_state(addr, size, MEM_READ_INTERNAL | MEM_WRITE_INTERNAL);
|
||||
break;
|
||||
}
|
||||
|
||||
flushmmucache_nopc();
|
||||
}
|
||||
|
||||
static void
|
||||
via_apro_pci_regs(via_apro_t *dev)
|
||||
{
|
||||
memset(dev, 0, sizeof(via_apro_t));
|
||||
|
||||
// Host Bridge registers
|
||||
|
||||
dev->pci_conf[0][0x00] = 0x06; // VIA
|
||||
dev->pci_conf[0][0x01] = 0x11;
|
||||
|
||||
dev->pci_conf[0][0x02] = 0x91; // VT82C691
|
||||
dev->pci_conf[0][0x03] = 0x06;
|
||||
|
||||
dev->pci_conf[0][0x04] = 6; // Command
|
||||
dev->pci_conf[0][0x05] = 0;
|
||||
|
||||
// These(06h-0fh) probably aren't needed but as they're referenced by the MVP3 chipset code i added them too
|
||||
|
||||
dev->pci_conf[0][0x06] = 0; // Status
|
||||
dev->pci_conf[0][0x07] = 0;
|
||||
|
||||
dev->pci_conf[0][0x09] = 0; // Program Interface
|
||||
|
||||
dev->pci_conf[0][0x0a] = 0; // Sub Class Code
|
||||
|
||||
dev->pci_conf[0][0x0b] = 0; // Base Class Code
|
||||
|
||||
dev->pci_conf[0][0x0c] = 0; // reserved
|
||||
|
||||
dev->pci_conf[0][0x0d] = 0; // Latency Timer
|
||||
|
||||
dev->pci_conf[0][0x0e] = 0; // Header Type
|
||||
|
||||
dev->pci_conf[0][0x0f] = 0; // Built-in Self test
|
||||
|
||||
dev->pci_conf[0][0x10] = 0x08; // Graphics Aperature Base
|
||||
|
||||
dev->pci_conf[0][0x34] = 0xa0; // Capability Pointer
|
||||
|
||||
dev->pci_conf[0][0x56] = 1; // Bank 6 Ending
|
||||
dev->pci_conf[0][0x57] = 1; // Bank 7 Ending
|
||||
dev->pci_conf[0][0x5a] = 1; // Bank 0 Ending
|
||||
dev->pci_conf[0][0x5b] = 1; // Bank 1 Ending
|
||||
dev->pci_conf[0][0x5c] = 1; // Bank 2 Ending
|
||||
dev->pci_conf[0][0x5d] = 1; // Bank 3 Ending
|
||||
dev->pci_conf[0][0x5e] = 1; // Bank 4 Ending
|
||||
dev->pci_conf[0][0x5f] = 1; // Bank 5 Ending
|
||||
|
||||
dev->pci_conf[0][0x64] = 0xec; // DRAM Timing for Banks 0,1
|
||||
dev->pci_conf[0][0x65] = 0xec; // DRAM Timing for Banks 2,3
|
||||
dev->pci_conf[0][0x66] = 0xec; // DRAM Timing for Banks 4,5
|
||||
dev->pci_conf[0][0x67] = 0x01; // DRAM Timing for Banks 6,7
|
||||
|
||||
dev->pci_conf[0][0x6b] = 1; // DRAM Abritration control
|
||||
|
||||
dev->pci_conf[0][0xa4] = 0x03; // AGP Status
|
||||
dev->pci_conf[0][0xa5] = 0x02;
|
||||
dev->pci_conf[0][0xa6] = 0;
|
||||
dev->pci_conf[0][0xa7] = 0x07;
|
||||
|
||||
// PCI-to-PCI
|
||||
|
||||
dev->pci_conf[1][0x00] = 0x06; // VIA
|
||||
dev->pci_conf[1][0x01] = 0x11;
|
||||
|
||||
dev->pci_conf[1][0x02] = 0x91; // VT82C691
|
||||
dev->pci_conf[1][0x03] = 0x06;
|
||||
|
||||
dev->pci_conf[1][0x04] = 7; // Command
|
||||
dev->pci_conf[1][0x05] = 0;
|
||||
|
||||
dev->pci_conf[1][0x06] = 0x20; // Status
|
||||
dev->pci_conf[1][0x07] = 0x02;
|
||||
|
||||
dev->pci_conf[1][0x09] = 0; // Program Interface
|
||||
|
||||
dev->pci_conf[1][0x0A] = 4; // Sub Class Code
|
||||
|
||||
dev->pci_conf[1][0x0B] = 6; // Base Class Code
|
||||
|
||||
dev->pci_conf[1][0x0C] = 0; // reserved
|
||||
|
||||
dev->pci_conf[1][0x0D] = 0; // Latency Timer
|
||||
|
||||
dev->pci_conf[1][0x0E] = 1; // Header Type
|
||||
|
||||
dev->pci_conf[1][0x0F] = 0; // Built-in Self test
|
||||
|
||||
dev->pci_conf[1][0x1c] = 0xf0; // I/O Base
|
||||
|
||||
dev->pci_conf[1][0x20] = 0xf0; // Memory Base
|
||||
dev->pci_conf[1][0x21] = 0xff;
|
||||
dev->pci_conf[1][0x24] = 0xf0;
|
||||
dev->pci_conf[1][0x25] = 0xff;
|
||||
|
||||
}
|
||||
|
||||
static void
|
||||
host_bridge_write(int func, int addr, uint8_t val, void *priv)
|
||||
{
|
||||
|
||||
via_apro_t *dev = (via_apro_t *) priv;
|
||||
|
||||
// Read-Only registers. Exact same as MVP3
|
||||
if ((addr < 4) || ((addr >= 5) && (addr < 7)) || ((addr >= 8) && (addr < 0xd)) || ((addr >= 0xe) && (addr < 0x12)) ||
|
||||
((addr >= 0x14) && (addr < 0x50)) || ((addr >= 0x79) && (addr < 0x7e)) || ((addr >= 0x85) && (addr < 0x88)) ||
|
||||
((addr >= 0x8c) && (addr < 0xa8)) || ((addr >= 0xad) && (addr < 0xfd)))
|
||||
return;
|
||||
|
||||
switch(addr){
|
||||
case 0x04: // Command
|
||||
dev->pci_conf[0][0x04] = (dev->pci_conf[0][0x04] & ~0x40) | (val & 0x40);
|
||||
|
||||
case 0x07: // Status
|
||||
dev->pci_conf[0][0x07] &= ~(val & 0xb0);
|
||||
break;
|
||||
|
||||
case 0x12: //Graphics Aperature Base
|
||||
dev->pci_conf[0][0x12] = (val & 0xf0);
|
||||
break;
|
||||
case 0x13:
|
||||
dev->pci_conf[0][0x13] = val;
|
||||
break;
|
||||
|
||||
case 0x61: // Shadow RAM control 1
|
||||
if ((dev->pci_conf[0][0x61] ^ val) & 0x03)
|
||||
apro_map(0xc0000, 0x04000, val & 0x03);
|
||||
if ((dev->pci_conf[0][0x61] ^ val) & 0x0c)
|
||||
apro_map(0xc4000, 0x04000, (val & 0x0c) >> 2);
|
||||
if ((dev->pci_conf[0][0x61] ^ val) & 0x30)
|
||||
apro_map(0xc8000, 0x04000, (val & 0x30) >> 4);
|
||||
if ((dev->pci_conf[0][0x61] ^ val) & 0xc0)
|
||||
apro_map(0xcc000, 0x04000, (val & 0xc0) >> 6);
|
||||
dev->pci_conf[0][0x61] = val;
|
||||
return;
|
||||
|
||||
case 0x62: // Shadow RAM Control 2
|
||||
if ((dev->pci_conf[0][0x62] ^ val) & 0x03)
|
||||
apro_map(0xd0000, 0x04000, val & 0x03);
|
||||
if ((dev->pci_conf[0][0x62] ^ val) & 0x0c)
|
||||
apro_map(0xd4000, 0x04000, (val & 0x0c) >> 2);
|
||||
if ((dev->pci_conf[0][0x62] ^ val) & 0x30)
|
||||
apro_map(0xd8000, 0x04000, (val & 0x30) >> 4);
|
||||
if ((dev->pci_conf[0][0x62] ^ val) & 0xc0)
|
||||
apro_map(0xdc000, 0x04000, (val & 0xc0) >> 6);
|
||||
dev->pci_conf[0][0x62] = val;
|
||||
return;
|
||||
|
||||
case 0x63: // Shadow RAM Control 3
|
||||
if ((dev->pci_conf[0][0x63] ^ val) & 0x30) {
|
||||
apro_map(0xf0000, 0x10000, (val & 0x30) >> 4);
|
||||
shadowbios = (((val & 0x30) >> 4) & 0x02);
|
||||
}
|
||||
if ((dev->pci_conf[0][0x63] ^ val) & 0xc0)
|
||||
apro_map(0xe0000, 0x10000, (val & 0xc0) >> 6);
|
||||
dev->pci_conf[0][0x63] = val;
|
||||
return;
|
||||
|
||||
//In case we throw somewhere
|
||||
default:
|
||||
dev->pci_conf[0][addr] = val;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static void
|
||||
pci_to_pci_bridge_write(int func, int addr, uint8_t val, void *priv)
|
||||
{
|
||||
via_apro_t *dev = (via_apro_t *) priv;
|
||||
|
||||
if (func != 1)
|
||||
return;
|
||||
|
||||
//As with MVP3. Same deal
|
||||
if ((addr < 4) || ((addr >= 5) && (addr < 7)) ||
|
||||
((addr >= 8) && (addr < 0x18)) || (addr == 0x1b) ||
|
||||
((addr >= 0x1e) && (addr < 0x20)) || ((addr >= 0x28) && (addr < 0x3e)) ||
|
||||
(addr >= 0x43))
|
||||
return;
|
||||
|
||||
switch(addr) {
|
||||
case 0x04:
|
||||
dev->pci_conf[1][0x04] = (dev->pci_conf[1][0x04] & ~0x47) | (val & 0x47);
|
||||
break;
|
||||
case 0x07:
|
||||
dev->pci_conf[1][0x07] &= ~(val & 0x30);
|
||||
break;
|
||||
|
||||
case 0x20: // Memory Base
|
||||
dev->pci_conf[1][0x20] = val & 0xf0;
|
||||
break;
|
||||
|
||||
case 0x22: // Memory Limit
|
||||
dev->pci_conf[1][0x22] = val & 0xf0;
|
||||
break;
|
||||
|
||||
case 0x24: // Prefetchable Memory base
|
||||
dev->pci_conf[1][0x24] = val & 0xf0;
|
||||
break;
|
||||
|
||||
case 0x26: // Prefetchable Memory limit
|
||||
dev->pci_conf[1][0x26] = val & 0xf0;
|
||||
break;
|
||||
|
||||
default:
|
||||
dev->pci_conf[1][addr] = val;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static uint8_t
|
||||
via_apro_read(int func, int addr, void *priv)
|
||||
{
|
||||
via_apro_t *dev = (via_apro_t *) priv;
|
||||
uint8_t ret = 0xff;
|
||||
|
||||
switch(func) {
|
||||
case 0:
|
||||
ret = dev->pci_conf[0][addr];
|
||||
break;
|
||||
case 1:
|
||||
ret = dev->pci_conf[1][addr];
|
||||
break;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void
|
||||
via_apro_write(int func, int addr, uint8_t val, void *priv)
|
||||
{
|
||||
switch(func) {
|
||||
case 0:
|
||||
host_bridge_write(func, addr, val, priv);
|
||||
break;
|
||||
|
||||
case 1:
|
||||
pci_to_pci_bridge_write(func, addr, val, priv);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static void
|
||||
via_apro_reset(void *priv)
|
||||
{
|
||||
via_apro_write(0, 0x63, via_apro_read(0, 0x63, priv) & 0xcf, priv);
|
||||
}
|
||||
|
||||
static void *
|
||||
via_apro_init(const device_t *info)
|
||||
{
|
||||
via_apro_t *dev = (via_apro_t *) malloc(sizeof(via_apro_t));
|
||||
|
||||
pci_add_card(PCI_ADD_NORTHBRIDGE, via_apro_read, via_apro_write, dev);
|
||||
|
||||
via_apro_pci_regs(dev);
|
||||
|
||||
return dev;
|
||||
}
|
||||
|
||||
static void
|
||||
via_apro_close(void *priv)
|
||||
{
|
||||
via_apro_t *dev = (via_apro_t *) priv;
|
||||
|
||||
free(dev);
|
||||
}
|
||||
|
||||
const device_t via_apro_device = {
|
||||
"VIA Apollo Pro",
|
||||
DEVICE_PCI,
|
||||
0,
|
||||
via_apro_init,
|
||||
via_apro_close,
|
||||
via_apro_reset,
|
||||
NULL,
|
||||
NULL,
|
||||
NULL,
|
||||
NULL
|
||||
};
|
||||
Reference in New Issue
Block a user