Move all include files to src/include

- 86Box's own headers go to /86box
- munt's public interface goes to /mt32emu
- all slirp headers go to /slirp (might want to consider using only its public inteface)
- single file headers from other projects go in include root

src/include/86box/spd.h

@@ -0,0 +1,73 @@
+/*
+ * 86Box	A hypervisor and IBM PC system emulator that specializes in
+ *		running old operating systems and software designed for IBM
+ *		PC systems and compatibles from 1981 through fairly recent
+ *		system designs based on the PCI bus.
+ *
+ *		This file is part of the 86Box distribution.
+ *
+ *		Emulation of SPD (Serial Presence Detect) devices.
+ *
+ * Version:	@(#)spd.h	1.0.0	2020/03/24
+ *
+ * Authors:	RichardG, <richardg867@gmail.com>
+ *
+ *		Copyright 2020 RichardG.
+ */
+#ifndef EMU_SPD_H
+# define EMU_SPD_H
+
+
+#define SPD_BASE_ADDR		0x50
+
+#define SPD_TYPE_EDO		0x02
+#define SPD_TYPE_SDRAM		0x04
+
+#define SPD_MIN_SIZE_SDRAM	8
+
+#define SPD_SDR_SIGNAL_LVTTL	0x01
+
+#define SPD_SDR_REFRESH_NORMAL	0x00
+#define SPD_SDR_REFRESH_SELF	0x80
+
+#define SPD_SDR_BURST_PAGE	0x80
+
+#define SPD_SDR_ATTR_BUFFERED	0x01
+#define SPD_SDR_ATTR_REGISTERED	0x02
+
+#define SPD_SDR_ATTR_EARLY_RAS	0x01
+#define SPD_SDR_ATTR_AUTO_PC	0x02
+#define SPD_SDR_ATTR_PC_ALL	0x04
+#define SPD_SDR_ATTR_W1R_BURST	0x08
+#define SPD_SDR_ATTR_VCC_LOW_5	0x10
+#define SPD_SDR_ATTR_VCC_HI_5	0x20
+
+
+typedef struct _spd_sdram_ {
+    uint8_t	bytes_used, spd_size, mem_type,
+    		row_bits, col_bits, rows,
+    		data_width_lsb, data_width_msb,
+    		signal_level, tclk, tac,
+    		config, refresh_rate,
+    		sdram_width, ecc_width,
+    		tccd, burst, banks, cas, cs, we,
+    		mod_attr, dev_attr,
+    		tclk2, tac2, tclk3, tac3,
+    		trp, trrd, trcd, tras,
+    		bank_density,
+    		ca_setup, ca_hold, data_setup, data_hold,
+    		reserved[26],
+    		spd_rev, checksum,
+    		mfg_jedec[8], mfg_loc;
+    char	part_no[18];
+    uint8_t	rev_code[2],
+    		mfg_year, mfg_week, serial[4], mfg_specific[27],
+    		freq, features,
+    		other_data[128];
+} spd_sdram_t;
+
+
+extern void spd_register(uint8_t ram_type, uint8_t slot_mask, uint16_t max_module_size);
+
+
+#endif	/*EMU_SPD_H*/