Ported the Roland MT-32 emulation (using MUNT) from bit's MT32 emulation branch of PCem;
Sanitized the OpenAL give buffer code in openal.c a bit;
NVR path is now specifiable in the Settings dialog;
Added Logitech 3-button serial mouse per protocol description by waltje;
The RTL8029AS and the BT-958D now actually use the PCI IRQ routing;
Fixed BT-958D PCI device initialization on the bus;
PCI IRQ routing now respects the edge/level setting set on ports 4D0/4D1.
Added the ability to set each floppy drive to turbo speed which will make it opperate at an effective 8000 kbps @ 300 rpm, for those who want faster but less accurate floppy timings.
CD-ROM set to host drive no longer gets reset to empty;
The CD audio thread initializer now ignores the mute status of the drives;
CD-ROM IOCTL audio handler is now more thread-safe;
Fixed CD-ROM image audio;
Added more sanity checks to memory read/write code in 808x.c;
Initial settings are now sane again.
Fixed all the reported bugs regarding the Settings dialog;
MIDI out device is now no longer reset to 0 after hard reset;
Removed all vestiges of the old disk activity flash;
The configuration file is no longer saved when it shouldn't be;
Redone the status bar icon updating so it is only done in win.c;
Made sure all variables in ibm.h are extern;
A lot of other bugfixes;
Added Mouse Systems Mouse emulation (patch from TheCollector1995);
Added IBM PS/1 Model 2133 (486) emulation (patch from TheCollector1995);
Tweaked the CPU dynamic recompiler cycle periods - 486SX 33 and 486DX 33 now work;
Increased compatibility with configuration files from before the previous commit.
Applied the mainline PCem slight CPU emulation speedup commit;
Added emulation of removable SCSI hard disks;
CD-ROM image handler now uses C FILE's (with the 64-bit size calls) instead of C++ iostreams, ISO images bigger than 2 GB should work properly again;
Split RLL/ESDI and XT IDE disks to their own bus types;
Turned status bar pane meaning and hard disks and CD-ROM BUS numbers to #define's;
Other miscellaneous cleanups.
Overhauled the configuration files so that the global variables are now subdivided into sections;
Fixed CD-ROM MODE SENSE page 0x2A which was being incorrectly reported as not implemented, fixes among other things Rayman 1 and Spellcross: The Last Battle (both now see the CD-ROM and play CD Audio fine).
The IDENTIFY PACKET DEVICE command of ATAPI PIO-only drives now behaves like that of mainline PCem ATAPI CD-ROM's;
Added two functions in win.c for waltje for updating the status bar text;
The configuration loader now does sanity checks on most loaded values.
Thoroughly clean up the code to vastly reduce the number of compiler warnings and found and fixed several bugs in the process;
Applied all mainline PCem commits;
Added SCSI hard disk emulation;
Commented out all unfinished machines and graphics cards;
Added the AOpen AP53 and ASUS P/I-P55T2 machines as well as another Tyan 440FX machine, all three with AMI WinBIOS (patch from TheCollector1995);
Added the Diamond Stealth 3D 3000 (S3 ViRGE/VX) graphics card (patch from TheCollector1995);
Added the PS/2 XT IDE (AccuLogic) HDD Controller (patch from TheCollector1995);
Added Microsoft/Logitech Bus Mouse emulation (patch from waltje);
Overhauled the makefiles (patch from waltje);
Added the Adaptec AHA-1542CF SCSI controller (patch from waltje);
Added preliminary (but still unfinished) Adaptec AHA-154x SCSI controller BIOS support (patch from waltje);
Added an ISABugger debugging device (patch from waltje);
Added sanity checks to the Direct3D code.
FDI stream images are now also handled by the 86F handler;
Both floppy drives' motors now spin separately;
Added Plantronics ColorPlus emulation per patch from PCem forum;
Applied all mainline PCem commits;
Fixed several bugs.
