- Renamed `cpp11_thread.cpp` to `thread.cpp`
- Removed features that are only supported by Win32 threads (`thread_wait` with timeout and mutex with spinlock)
- Fixed formatting in `thread.cpp`
Properly fixed text/graphics mode of the S3 pre-ViRGE cards.
PIX TRANS cleanups.
Added a sanity check to banking, per bit 0 of CRTC31.
Initial implementation of Enhanced 4-bit mode.
911/924 chips use CRTC43 bit 3 for enabling 15/16bpp mode.
fb_only variable used correctly as of now (depending if on 4bit or 8bit+ modes).
S3 ViRGE changes part 2:
Made the Trio3D/2X AGP use the PCI_ADD_AGP part accordingly
RAMDAC changes:
Sierra 11483 and 11487 don't have an RS2 signal so the four times reading scheme of 0x3c6 is used instead, per documentation.
Fixed AT&T 49x bpp selection.
Other changes:
Fixed remaining rendering issues with the Radius SVGA HT209 card.
Added a timer to improve perfomance of the 3D engine.
Made the Trio3D/2X available for all.
Reserved bit 2 of CR33 is now always set to make sure Win95's Trio3d/2X drivers work along with a workaround for the memory size.
Added preliminary DMA bus master capabilities.
Fixed ET4000/W32 (without letters) hardware cursor.
Fixed non-interlaced 1280x1024x8bpp Cirrus mode in the 5434.
Added a note regarding the Radius (HT209) 8bpp render.
Reworked the TGUI9440, but still WIP.
Changes to device_t struct to accomodate the upcoming PCI IRQ arbitration rewrite;
Added device.c/h API to obtain name from the device_t struct;
Significant changes to win/win_settings.c to clean up the code a bit and fix bugs;
Ported all the CPU and AudioPCI commits from PCem;
Added an API call to allow ACPI soft power off to gracefully stop the emulator;
Removed the Siemens PCD-2L from the Dev branch because it now works;
Removed the Socket 5 HP Vectra from the Dev branch because it now works;
Fixed the Compaq Presario and the Micronics Spitfire;
Give the IBM PC330 its own list of 486 CPU so it can have DX2's with CPUID 0x470;
SMM fixes;
Rewrote the SYSENTER, SYSEXIT, SYSCALL, and SYSRET instructions;
Changed IDE reset period to match the specification, fixes#929;
The keyboard input and output ports are now forced in front of the queue when read, fixes a number of bugs, including the AMI Apollo hanging on soft reset;
Added the Intel AN430TX but Dev branched because it does not work;
The network code no longer drops packets if the emulated network card has failed to receive them (eg. when the buffer is full);
Changes to PCI card adding and renamed some PCI slot types, also added proper AGP bridge slot types;
USB UHCI emulation is no longer a stub (still doesn't fully work, but at least Windows XP chk with Debug no longer ASSERT's on it);
Fixed NVR on the the SMC FDC37C932QF and APM variants;
A number of fixes to Intel 4x0 chipsets, including fixing every register of the 440LX and 440EX;
Some ACPI changes.
Marked the Trio3D/2X as incomplete/dev-branched due to bugs on win9x and no public datasheet of it.
Added 8MB option to the supported video memory to the ViRGE/VX.
- 86Box's own headers go to /86box
- munt's public interface goes to /mt32emu
- all slirp headers go to /slirp (might want to consider using only its public inteface)
- single file headers from other projects go in include root
Unified screenshot code and moved it to video.c, it is now independent of both renderer and platform;
The EGA/(S)VGA overscan now also works for CGA, PCjr, Tandy, and CGA-using Amstrads;
Fixed EGA/(S)VGA overscan operation so it works correctly with scrolling and panning;
Fixed 320x200x32K and 320x200x64K modes on the ET4000/W32p;
Fixed the Video 7 1024i chip ID and video memory options, fixes#431;
Fixed a banking bug in the S3 cards, fixes Windows 9x and NeoPaint.
Cleaned up the parallel port emulation, added IRQ support, and made enabling/disabling per port;
Added the Award 430NX and the Intel Classic/PCI (Alfredo, 420TX);
Finished the 586MC1;
Added 8087 emulation;
Moved Cyrix 6x86'es to the Dev branch;
Sanitized/cleaned up memregs.c/h and intel.c/h;
Split the chipsets from machines and sanitized Port 92 emulation;
Added support for the 15bpp mode to the Compaq ATI 28800;
Moved the MR 386DX and 486 machines to the Dev branch;
Ported the new dynamic recompiler from PCem, but it remains in Dev branch until after v2.00;
Ported the new timer code from PCem;
Cleaned up the CPU table of unused stuff and better optimized its structure;
Ported the Open-XT and Open-AT from VARCem, the Open-AT is in the Dev branch;
Ported the XT MFM controller rewrite and adding of more controllers (incl. two RLL ones), from VARCem;
Added the AHA-1540A and the BusTek BT-542B;
Moved the Sumo SCSI-AT to the Dev branch;
Minor IDE, FDC, and floppy drive code clean-ups;
Made NCR 5380/53C400-based cards' BIOS address configurable;
Got rid of the legacy romset variable;
Unified (video) buffer and buffer32 into one and make the unified buffer 32-bit;
Added the Amstead PPC512 per PCem patch by John Elliott;
Switched memory mapping granularity from 16k to 4k (less than 1k not possible due to internal pages);
Rewrote the CL-GD 54xx blitter, fixes Win-OS/2 on the 54x6 among other thing;
Added the Image Manager 1024 and Professional Graphics Controller per PCem patch by John Elliott and work done on VARCem;
Added Headland HT-216, GC-205 and Video 7 VGA 1024i emulation based on PCem commit;
Implemented the fuction keys for the Toshiba T1000/T1200/T3100 enhancement;
Amstrad MegaPC does now works correctly with non-internal graphics card;
The SLiRP code no longer casts a packed struct type to a non-packed struct type;
The Xi8088 and PB410a no longer hang on 86Box when PS/2 mouse is not present;
The S3 Virge on BeOS is no longer broken (was broken by build #1591);
OS/2 2.0 build 6.167 now sees key presses again;
Xi8088 now work on CGA again;
86F images converted from either the old or new variants of the HxC MFM format now work correctly;
Hardware interrupts with a vector of 0xFF are now handled correctly;
OPTi 495SX boards no longer incorrectly have 64 MB maximum RAM when 32 MB is correct;
Fixed VNC keyboard input bugs;
Fixed AT RTC periodic interrupt - Chicago 58s / 73f / 73g / 81 MIDI play no longer hangs with the build's own VTD driver;
Fixed mouse polling with internal mice - Amstrad and Olivetti mice now work correctly;
Triones ATAPI DMA driver now correctly reads a file at the end of a CD image with a sectors number not divisible by 4;
Compaq Portable now works with all graphics cards;
Fixed various MDSI Genius bugs;
Added segment limit checks and improved page fault checks for several CPU instructions - Memphis 15xx WINSETUP and Chicago 58s WINDISK.CPL no longer issue a GPF, and some S3 drivers that used to have glitches, now work correctly;
Further improved the 808x emulation, also fixes the noticably choppy sound when using 808x CPU's, also fixes#355;
OS/2 installer no logner locks up on splash screen on PS/2 Model 70 and 80, fixes#400.
Fixed several Amstead bugs, GEM no longer crashes on the Amstrad 1640, fixes#391.
Ported John Elliott's Amstrad fixes and improvement from PCem, and fixed the default language so it's correctly Engliish, fixes#278, fixes#389.
Fixed a minor IDE timing bug, fixes#388.
Fixed Toshiba T1000 RAM issues, fixes#379.
Fixed EGA/(S)VGA overscan border handling, fixes#378;
Got rid of the now long useless IDE channel 2 auto-removal, fixes#370;
Fixed the BIOS files used by the AMSTRAD PC1512, fixes#366;
Ported the Unicode CD image file name fix from VARCem, fixes#365;
Fixed high density floppy disks on the Xi8088, fixes#359;
Fixed some bugs in the Hercules emulation, fixes#346, fixes#358;
Fixed the SCSI hard disk mode sense pages, fixes#356;
Removed the AMI Unknown 386SX because of impossibility to identify the chipset, closes#349;
Fixed bugs in the serial mouse emulation, fixes#344;
Compiled 86Box binaries now include all the required .DLL's, fixes#341;
Made some combo boxes in the Settings dialog slightly wider, fixes#276.
Fixed PC speaker sound volume in PIT mode 0;
A few CPU emulation clean-ups;
Hard disk controller changing redone in a less messy way;
Re-added the long-missing key send delay handling to the XT keyboard handler;
Fixed a bug that was causing SLiRP not to work when compiled with MingW/GCC 7.3.0-2 or newer;
Some serial mouse and port fixes;
A lot of changes to printer emulation, mostly based on DOSBox-X;
Printer PNG writer now uses statically linked libpng;
Added support for the HxC MFM floppy image format and upped 86F format version to 2.12;
Ported various things from PCem and some from VARCem;
Added the S3 86c801/805 emulation (patch from TheCollector1995);
Fixed and renamed the EGA monitor options;
Better synchronized the 808x to the PIT and the CGA;
Fixed the CGA wait state calculation;
Cleaned up some things in mem.c;
Fixed some things in the floppy emulation to make VisiOn get the correct errors from the copy protection disk;
Fixed several renderer-related bugs, including the SDL2 renderer's failure to take screenshots;
The Jenkins builds are now compiled with MingW/GCC 7.4.0-1 and include all the required DLL's.
Fixes to various hard disk controllers;
Added the Packard Bell PB640;
Fixed the InPort mouse emulation - now it works correctly on Windows NT 3.1;
Removed the status window and the associated variables;
Completely removed the Green B 486 machine;
Fixed the MDSI Genius;
Fixed the single-sided 5.25" floppy drive;
Ported a CPU-related commit from VARCem.
Extensively cleaned up and changed the CD-ROM code;
Removed CD-ROM IOCTTL (it was causing performance and stability issues);
Turned a lot of things into device_t's;
Added the PS/1 Model 2011 XTA and standalone XTA hard disk controllers, ported from Varcem;
Numerous FDC fixes for the PS/1 Model 2121;
NVR changes ported from Varcem;
The PCap code no longer requires libpcap to be compiled;
Numerous fixes to various SCSI controllers;
Updated NukedOPL to 1.8;
Fixes to OpenAL initialization and closing, should give less Audio issues now;
Revorked parts of the common (S)VGA code (also based on code from QEMU);
Removed the Removable SCSI hard disks (they were a never finished experiment so there was no need to keep them there);
Cleaned up the SCSI hard disk and Iomega ZIP code (but more cleanups of that are coming in the future);
In some occasions (IDE hard disks in multiple sector mode and SCSI hard disks) the status bar icon is no longer updated, should improve performance a bit;
Redid the way the tertiary and quaternary IDE controllers are configured (and they are now device_t's);
Extensively reworked the IDE code and fixed quite a few bugs;
Fixes to XT MFM, AT MFM, and AT ESDI code;
Some changes to XTIDE and MCA ESDI code;
Some fixes to the CD-ROM image handler.
