CD-ROM side: fixed a mode sense page (0x08 Sony, used by both Sony and Texel drives) as well as corrected the Toshiba specific drive speeds (bytes_per_second).
NCR 5380 side: split the work into the generic 5380 core and the ASICs into separate sources (53c400 and T128) and added the T228 MCA adapter based on the 128.
1.Re-implemented in the best way possible the muted part of the Toshiba/NEC Play Audio commands and related, per spec.
2. Forgot to add a check to a Sony Vendor Data Out command when the len is 0 it should become a Status command, fixes emulator crashes when len is 0 using some CD software.
More timer related fixes regarding the speed combinations, looking at you, Rancho (8.10R and 8.20R), but at least it should solve most problems with boots.
1. The chip in question now supports the right command length for vendor unique commands, fixes crashes that use said commands.
2. Made the CD speed of said chip even closer to the real thing.
1. Changed the MCA ID of said adapter to one that is add-on based rather than integrated (still no bios though).
2. Fixed the DMA/IRQ stuff of the 86c01 DMA side of the card.
1. Added Mode Page Codes 0x00 and 0x03 (Unit Attention and Format Device) to the SCSI CD-ROM code.
2. Corrected the Read Disc Information TOC (actually Read TOC vendor unique) for NEC SCSI CD-ROMs, this, together with the fix above, fixes reading data cd-rom's using NEC vendor commands.
3. Actually identify NEC drives per manual (SCSI unknown version per the -75 and -77 manuals).
4. Re-added the 75 and 77 drives now that the NEC vendor commands are fine + an extra 25a drive with revision 1.0a (from a screenshot from vogons).
1. Cirrus Logic GD54xx, Paradise/WD VGA now reset the interlace once a text mode is issued if not done automatically.
2. Paradise/WD's 15/16bpp modes using the 800x600 resolution now have the correct ma_latch, should fix most operating systems drivers using this combo.
3. More fixes (hopefully) to the accelerated pitch and rowoffset of the Trident TGUI cards (9440AGi and 96x0XGi), should fix issues with delayed displays mode changes under various operating systems (e.g.: Win3.1x).
4. Preliminary implementation of the Area Fill command of XGA, which is issued while using various painting and/or calc utilities on Win3.1x (IBM XGA updated drivers, e.g.: 2.12).
5. Preliminary (and incomplete) 4bpp XGA mode.
6. The XGA memory test for the 0xa5 using writes (used by various operating systems) no longer conflicts with DOS' XGAKIT's memory detection.
7. Small ROP fixes to both XGA and 8514/A.
8. Re-organized the mapping of the Mach32 chipset, especially when to enable the ATI mode or switching back to IBM mode, should fix LFB conflicts with various operating systems.
9. According to The OS/2 Museum, the Adaptec AHA-154xB series of SCSI cards fail the ASPI4DOS.SYS 3.36 signature check, so now make the changes accordingly.
10. Remove useless and crashy bios-less option of the Trantor T128.
11. The Image Manager 1024 card can also be used on a XT (although only if it has a V20/V30).
12. Re-organized the IBM PS/2 model 60 initialization as well as its right POS machine ID (though an update to sc.exe is still required for the POST memory amount to work normally).
1. Changed the p's back to priv's.
2. Made the Spock/Tribble cards use picint instead of picintlevel.
3. Corrected fallthroughs and a minor change in the SCSI CD-ROM code core.
1. Added the Tribble 16-bit IBM SCSI adapter.
2. Reworked the vendor unique commands to counter audio issues as well as adding some undocumented commands (thanks to the source code of xmcd!), plus replacing the NEC CD-ROM DRIVE:75 with the :38 one.
