ATAPI READ TOC PMA ATIP command now uses direct SCSI passthrough when using IOCtl on Windows;
ATAPI READ TOC PMA ATIP command now supports non-MSF raw mode;
ATAPI READ TOC PMA ATIP command now returns the given maximum length if the actual length of the data is above it;
ATAPI READ TOC PMA ATPI command on Windows IOCtl now returns size of data in the returned buffer's header.
Moved CD-ROM read data buffer declaration and definitions to SCSI source files and headers, but still applying to IDE when needed.
SCSI Read commands now return the correct sectors on callback.
DMA bug fixes.
Added experimental NVidia Riva TNT2 emulation (patch from MoochMcGee);
ASUS P/I-P54TP4XE, ASUS P/I-P55T2P4, and ASUS P/I-P55TVP4 are back;
National Semiconductor PC87306 Super I/O chip now correctly reenables devices after a chip power cycle;
Several FDC improvements and the behavior is now a bit closer to real hardware (based on actual tests);
Added MR Intel Advanced/ATX with Microid Research BIOS with support for 4 floppy drives and up to 4 IDE controllers;
Added floppy drives 3 and 4, bringing the maximum to 4;
You can now connect hard disks to the tertiary IDE controller;
Correct undocumented behavior of the LEA instruction with register is back on 286 and later CPU's;
Pentium-rea models with Intel chipsets now have port 92 (with alternate reset and alternate A20 toggle);
Overhauled DMA channel read and write routines and fixed cascading;
Improved IMG detection of a bad BPB (or complete lack of a BPB);
Added preliminary emulation of PS/2 1.44 MB and PC-98 1.25 MB 3-mode drives (both have an inverted DENSEL pin);
Removed the incorrect Amstrad mouse patch from TheCollector1995;
Fixed ATAPI CD-ROM disk change detection;
Windows IOCTL CD-ROM handler now tries to use direct SCSI passthrough for more things, including obtaining CD-ROM capacity;
The Diamond Stealth32 (ET4000/W32p) now also works correctly on the two Award SiS 496/497 boxes;
The (S)VGA handler now converts 6-bit RAMDAC RGB channels to standard 8-bit RGB using a lookup table generated at emulator start, calculated using the correct intensity conversion method and treating intensity 64 as equivalent to 63;
Moved a few options from the Configuration dialog box to the menu;
SIO, PIIX, and PIIX3 now have the reset control register on port CF9 as they should;
Several bugfixes.
Added the ATAPI READ CD MSF command;
UNIT ATTENTION is now a condition above the SCSI/ATAPI senses so that non-UNIT ATTENTION senses can still be reported if said condition is present, should they occur;
Applies mainline PCem commit: Added code generation for RMW versions of INC/DEC.
Removed the lone Misc menu and mvoed Status to Settings;
Added a SCSI CD-ROM option to the menu;
Removed the atapi_cdrom_enabled option and replaced any usage of it with !scsi_cdrom_enabled;
Disabling/enabling the CD-ROM drive is now separate from the drive's contents;
The tertiary IDE controller now never gets enabled is the CD-ROM drive is either disabled or SCSI.
Fixed FDI stream parameters passed to the 86F handler, FDI stream images now read correctly again;
The National Semiconductors PC87306 SuperI/O chip now supports enhanced FDC mode.
FDI stream images are now also handled by the 86F handler;
Both floppy drives' motors now spin separately;
Added Plantronics ColorPlus emulation per patch from PCem forum;
Applied all mainline PCem commits;
Fixed several bugs.
Japanese HDI hard disk images are now supproted;
FDC FORMAT command now CRC's the correct data, fixes formatting inserted IMG's;
FDC SEEK command now no longer incorrectly reports invalid status when HDSEL (head select) is 1, fixes booting from inserted floppies of any format on boards other than ASUS P/I-P55TVP4.
Fixed the RTL8029AS again (one of my "fixes" broke it);
RTL8029AS PCI register 4 is now written to;
Added incomplete (and currently commented out) emulation of the AWE64 PCI;
Replaced sector-based floppy emulation with more accurate code.
Cleaned up floppy code a lot and reverted to single poller;
Fixed segment present bit and limit checking at read/write within segment;
The ASUS boards now have memregs too;
RTC code improved based on suggestion by Sarah Walker;
Fixed SVGA odd/even emulation and added chain odd/even support;
Removed non-existent CPU's.
