SCSI DMA writes (for MODE SELECT) now correctly use InitLength instead of request_length when bus type is SCSI;
Fixed MODE SELECT page saving;
CD Audio volume is now correctly initialized on card initialization for all Sound Blaster variants, fixes CD Audio being muted when booting without the Sound Blaster initialization program;
Brought the Sound Blaster variants back to a sane sound volume but still louder than the old quietness;
Moved SCSI adapter initialization to before sound card initialization, fixes DOS SCSI CD-ROM driver hangs under some conditions.
Fixed a link-breaking bug in cdrom.c;
The AHA-154x now supports commands 0x28 (GET EXTENDED BIOS INFO) and 0x29 (UNLOCK MAILBOX) and no longer reports a firmware revision with scatter/gather bug;
The BusLogic now supports command 0x20 (RESET);
Fixed the GPIO register mapping on the National Semiconductors PC87306 Super I/O chip.
Improved the BusLogic incoming mailbox code;
The BusLogic callback is now three-phases and outgoing mailbox interrupts are emulated correctly;
Fixed the CD-ROM command READ DISC INFORMATION (0x51), fixes NetBSD crashing 86Box with segmentation fault when using the AHA-154x;
Added the CD-ROM command PAUSE/RESUME ALT (0xC2).
Previous CD-ROM sense is now correctly cleared when a REQUEST SENSE command is performed, fixes detection of disc change after setting the drive to empty first regardless of what bus is used for the CD-ROM.
ATAPI CD-ROM word reads no longer incorrectly discard the upper 16 bits, fixes the CD-ROM problems;
Significantly rewrote parts of the AHA-154x and BusLogic emulation, NT 3.1 RTM and MS-DOS drivers now works correctly;
The function in cdrom.c to read data blocks from the disc now correctly advances the position of the sector to read in non-passthrough mode, fixes multiblock reads from directly mounted ISO's;
Both ATAPI and SCSI now always check for Unit Attention and Not Ready on command execution.
SCSI LUN is now selectable for the CD-ROM drives;
Made sure every BusLogic RequestSetup ends in a StartMailbox sooner or later, fixes freezes with the DOS BusLogic drivers;
Commented out execess logging from mem.c;
Applied the mainline PCem commit that fixes the Bahamas64 on some boards.
Fixed several ATAPI CD-ROM bugs;
Added some missing CPL override checks to the MMU translate functions;
Tertiary and quaternary IDE controllers are now automatically disabled if not a single device is attached to them;
Changed sleep time on compile from 10 seconds to 2 seconds.
Fixed IDE and ATAPI 8-bit data reads and writes by rewriting the IDE and CD-ROM PIO data read and write code so that the base code is now 8-bit;
Added some compiler directives that if set, will enable togglable logging and log breakpoints;
Empty IDE channels now always report a status of 0x10 rather than 0x20, and do it on port 3F6h/376h/36Eh/3EEh too, fixes OAKCDROM.SYS infinite loop when hitting an empty IDE channel.
Four CD-ROM drives are now emulated;
ATAPI DMA is now emulated;
Unified CD-ROM pass through to host drive handling;
Applied all (applicable) mainline PCem commits.
