If the chips are PCI-based, assume linear addressing is always enabled when the linear base is on valid value (e.g.: not 0). Should fix a regression when linear addressing is used by almost everything in the PCI world (e.g.: Win95's drivers).
1. Its execution is exactly (actually 99%) the same as the S3 Bresenham procedure, so I thought of making the Bresenham command of the TGUI9440/96x0 behave like the s3 one but adapted to use Trident's ports and meanings and now OS/2 and Windows lines in certain programs work fine.
ATI Mach64 is temporarily unthreaded because of blitter desyncing.
ATI Mach32 now returns to ATI mode from IBM mode and vice versa more correctly.
Make the IBM 8514/A compatible poll not run if a 3D add-on card (Voodoo1/2) takes precedence (seen on a Mach32 PCI and Voodoo2 3D combo).
Finally ended the mess ups of the TGUI9440/96x0 pitch, it actually was the CRTC offset reg (SVGA CRTC 0x13) that defined it with some shifting based on the BPP.
1. Cirrus Logic GD54xx, Paradise/WD VGA now reset the interlace once a text mode is issued if not done automatically.
2. Paradise/WD's 15/16bpp modes using the 800x600 resolution now have the correct ma_latch, should fix most operating systems drivers using this combo.
3. More fixes (hopefully) to the accelerated pitch and rowoffset of the Trident TGUI cards (9440AGi and 96x0XGi), should fix issues with delayed displays mode changes under various operating systems (e.g.: Win3.1x).
4. Preliminary implementation of the Area Fill command of XGA, which is issued while using various painting and/or calc utilities on Win3.1x (IBM XGA updated drivers, e.g.: 2.12).
5. Preliminary (and incomplete) 4bpp XGA mode.
6. The XGA memory test for the 0xa5 using writes (used by various operating systems) no longer conflicts with DOS' XGAKIT's memory detection.
7. Small ROP fixes to both XGA and 8514/A.
8. Re-organized the mapping of the Mach32 chipset, especially when to enable the ATI mode or switching back to IBM mode, should fix LFB conflicts with various operating systems.
9. According to The OS/2 Museum, the Adaptec AHA-154xB series of SCSI cards fail the ASPI4DOS.SYS 3.36 signature check, so now make the changes accordingly.
10. Remove useless and crashy bios-less option of the Trantor T128.
11. The Image Manager 1024 card can also be used on a XT (although only if it has a V20/V30).
12. Re-organized the IBM PS/2 model 60 initialization as well as its right POS machine ID (though an update to sc.exe is still required for the POST memory amount to work normally).
Fixed the Win98 Trident PCI (and 9440 VLB) card accelerator pitch while maintaining compatibility with other OSes, despite being undocumented (this is at least an attempt to fix it properly based on the logs).
1. The passthrough from VGA to 8514/A and/or 8514/A to VGA no longer relies on hackish places where to switch from/to, instead, relying on port 0x3c3 of VGA doing so (though the Mach8/32 still needs some places where to manually switch from/to, mainly the MCA one when configuring the EEPROM).
2. Implemented the MCA behalf of the Mach32 and its corresponding reset function.
3. Properly implemented (more or less) true color, including 24-bit BGR rendering
4. Other fixes such as color patterns and mono patterns being more correct than before in various operating systems and in 24-bit true color.
5. Implemented the onboard Mach32 video of the IBM PS/ValuePoint P60 machine.
6. Made the onboard internal video detect when it's 8514/A compatible or not (CGA/EGA/MDA/VGA/etc.). If the former is selected, then the video monitor flag is used instead (for QT).
7. The TGUI9400 and 9440, if on VLB, now detect the right amount of memory if on 2MB.
8. Initial implementation of the ATI 68875 ramdac used by the Mach32 and made the ATI 68860 8514/A aware when selected with the Mach32AX PCI.
9. Separated the 8514/A ramdac ports from the VGA ramdac ports, allowing seamless transition from/to 8514/A/VGA.
10. Fixed a hdisp problem in the ET4000/W32 cards, where it was doubling the horizontal display in 15bpp+ graphics mode.
11. Removed the 0x3da/0x3ba port hack that was on the Mach8/32 code, relying on the (S)VGA core instead.
12. Reworked and simplified the TGUI9440 pitch register based on logging due to no documentation at all.
S3 (all): Fixes to the commonly used accel commands (0, 1, 2, 6, 7) to make the OS/2 software cursor to not bug on the left edge of the screen.
TGUI: Reworked the non-bitblt commands as well as the accel pitch and bpp modes.
