1. Do not stall the guest when the passthrough mode is on, fixes hang ups in Windows 3.1 using the 2.3 drivers.
2. In the pitch register, make sure the passthrough goes on when needed only on the ATI Mach32, not 8, fixes mode on/off in text mode when needed.
3. Cosmetic changes and logs.
1. As tiring as it seems, XOR properly the passthrough bits for mode changes. Fixes everything tested as of now (Mach8/32).
2. Implemented separate destination and source GE pitch and offsets. Fixes Windows 3.1 mach8/32 drivers using devicebitmap enabled (or dmp=1).
3. Properly fixed high and true color patterns so that the aforementioned patterns are drawn correctly in various stuff.
4. Implemented in the best possible way the CRT offset (currently in on conjunction with the GE offset).
5. On ScanToX with bpp set to 24 and dpconfig 0x6211, optmize the SRC/CUR X-Y coordinates at the end of the blit.
6. For mode changes, don't call the mode change recalctimings function if we aren't in the appropriate bits of the respective ports.
7. Separate 8514/A compatible and Extended foreground/background selection implemented, fixes Windows 3.x ATI Ultra drivers from 1992 without hacks.
8. Clear the busy flags when needed without stalling the entire guests (but not the emulator itself) (Mach8/32).
9. The MMIO regs should be enabled only when the VGA aperture has reached a graphics mode (0xA000). This fixes NT 3.x mach drivers in true color mode and making Win3.1 drivers working without a hitch at the same time.
10. Actually implement the hardware 4bpp cursor properly on Mach32.
11. Cosmetic cleanups.
1. Aliases are aliases, period.
2. Actually make the ports using bit 15 of their range use the command FIFO.
3. Improved the special ATI command 0xc2b5 in the IBM bitblt side, fixes cursor issues in 24bpp mode using OS/2.
4. When the FIFO is empty, clear the busy and available flags.
5. Also reapply a workaround for 24bpp foreground color patterns in ATI command Scan To X command, fixes patterns in OS/2 and possibly elsewhere.
6. Accelerated HiColor mode, in the IBM passthrough mode, should always be enabled, for now, as well as the Extended ATI Mach32 8bpp mode when prompted, fixes OS/2 booting into the GUI in HiColor mode.
7. Dummy data path configuration values on direct linedraw should not trigger a pixtrans read when it's not needed, fixes possible hang ups in IBM/ATI mode when the busy flag remains enabled.
1. The DX/DY coordinates for BitBLT are now signed again, fixes 8514/A cursor issues.
2. Made the busy/data available processor statuses more like the ATI one for more stability and no stalls, fixes Windows 3.x and IBM OS/2 1.x (possibly later ones too) that use the built-in 8514/A driver.
3. Made the mode switching clearer (through a note) regarding the shadow sets, this should make every program happy, I hope.
4. In the Mach32 series only, a first load of the CRT sets also initializes the GE offsets if the corresponding bit is set, fixes Mach8/32 mode tests in their eeprom and demoai with hdiload from ATI/IBM.
1. Use proper identification to what chips use what.
2. Apply some mode switch fixes to the ATI 8514/A Ultra and make 1024x768 87Hz interlaced the default mode if htotal is 0 and on ati8514_init.
3. Add the undocumented ports to the ATI 8514/A Ultra add-on as well.
1. Implemented the FIFO test data to pass some tests of the Mach8 POST ROM and tests (not complete yet).
2. Overhauled the mode switches again, but this time with way less hacks and more on manual instructions.
3. Use a function pointer to determine if the Mach8 type used is a VGA combo or add-on.
4. Mach32 mode tests are no longer incorrectly green (was caused by improper pixtrans parts).
5. Implemented overscan color to the Mach32 as well as the CRT offset.
6. And fixed a PCI LFB GPF issue with the Mach32 2.3 drivers on Win3.1x.
7. Implemented memory boundary for both the Mach32 SVGA and its accelerator.
8. Added undocumented ports used by the FIFO (such as ports 0x8AEE and 0xEAEE).
9. Plus resetting the device right a la s3.
10. Temporarily switched the bus type of the Mach8 to 8-bit in both MCA and ISA variants.
1. Follow the Mach32 manual more closely regarding vblank support.
2. The subsystem status now takes account of the other bits more accurately.
3. The Mach32 PCI, when used with the ATI 68860 ramdac, has its own bpp's when in accelerator mode, separate from the VGA compatible side, so fix this accordingly.
4. Reset the vram when a mapping change occurs, should clear the messups in the ATI Mach8/32 accel video mode tests.
XGA:
1. Added a proper poll so to have its timings independent of the SVGA core and changes its renderer accordingly, mainly a blank render one.
2. Workaround the Ctrl-Alt-Del reset of Windows 2.x so that it switches back to VGA text mode correctly when using the 0xA000 64K aperture (in vid_svga.c).
SVGA core:
Re-organized the way the different timers are organized so that the XGA and 8514/A pollers can coexist with the SVGA timer without conflicts.
ATI Mach32:
Reworked the true color renderer and made it a Mach32 exclusive due to its differences from the standard one. Fixes wrong rendered colors in NT using the 32bpp renderer in RGB mode.
S3:
1. Cleaned up the Short Stroke command processing.
2. Proceed calculating the error term only when it's equal or greater than the line length (Draw Line, Command 1 and also applies to Short Strokes, Command 0).
8514/A compatibles:
1. Reworked the polygon draw type A processing.
2. As with the S3, reworked the way error term is handled in the processing, and on Command 5 (Draw Polygon Boundary Line).
Fix nibble pixtrans on bitblt command (CMD 6), this makes icons and stuff on MS OS/2 1.10 Nokia's 8514 driver no longer glitchy (IBM's was already fine as is and it still is).
1. Finally add the ATI 8514/A Ultra add-on BIOS in both ISA and MCA variants (despite the ROM page failure on POST).
2. Fixed a mode switch bug in the Mach8 (both add-on and vga combo) when exiting the Win3.x GUI using the native drivers.
3. Corrected (best possible) the eeprom load of the Mach8 products.
4. Partial implementation of the FIFO on the 8514/A compatible products including Mach8/32 and plain IBM 8514/A.
1. vga_on global variable removed, as it didn't play well with 2 subsystems at once (8514/A and XGA both enabled).
2. Emulate the Foreground/Background Color aliases of PIX_TRANS properly when not executing a command.
3. Voodoo 3D override now works properly (again) with Mach32 PCI cards and others by turning the 8514/A timer off and on accordingly.
IBM 8514/A (MCA/ISA).
Added a configure button to the QT frontend for the amount of memory used by said add-on chips.
XGA:
Forgot a change about the 4mb aperture.
8514/A compatibles:
1. The mode switch (from VGA to 8514/A/ATI and vice-versa) has been fixed again (for the Nth time).
2. Removed a pattern hack used on DPCONFIG = 0x5211 on bitblt, now patterns work properly using the ATI Mach8 3.0 win3.1x drivers.
3. Clipping regs are more accurate for acceleration.
XGA 1-2:
A picky OS is a picky OS, fixes to the Win95 fonts (which uses the pattern sources) applied.
8514/A/Mach8/32:
Reworked the acceleration a bit as well as the mode switches from VGA to ATI/8514/A mode and viceversa based on the documentation. Fixes the Linux GUI fonts using the Mach32 driver (possibly Mach8 too) and other anomalies (still needs more work on the acceleration though).
PVGA:
Minor fixes to the banking.
S3-based (Pre-ViRGE):
1. Made the chip class use its own banking so that the Enhanced Mode mapping (equivalent to 64K-based A0000) is taken into account (per bit 3 of CRTC31, which forces the mapping to be 64K A0000, regardless of the GDCREG6 bits). Fixes NT 3.1 347.1's S3 driver.
2. Initial rework on 15bpp/16bpp accelerated mode of the 911/924 chips (currently not 100% bug free, I need help with this chips).
XGA-1/2:
Get rid of the linear endian reverse variable hack used by OS/2 and, instead, use the already declared ones more wisely, fixes OS/2 2.1 reversed fonts and keeps everything else working as it should.
Misc:
Added the BT481 RAMDAC for future card use.
8514/A changes:
1. Correct interlaced display resolution.
2. Added a limit to cursor coordinates.
3. Test/WIP features of the add-on Mach8 side (ATI 8514/A Ultra) such as configurable BIOS.
4. Made the CMD 5 of the acceleration (Polygon Boundary) more accurate per manual (as much as I could regarding the clipping).
Cirrus related:
1. Added SUBSYS PCI vendor/device ID of the 5480 (per manual).
IBM VGA:
1. Built-in/option rom-less VGA don't need the "available" flag.
ATI Mach8/32:
1. As with 8514/A, corrected interlaced display.
XGA-1/-2:
1. Moved the XGA R/W memory size tests out of the SVGA R/W routines to reflect the per card basis, although anything that uses its own SVGA mapping would call the tests there (such as Cirrus, Headland and ATI) when not accessing the LFB. This finally puts an end to the XGA MCA mapping enabling bugs.
2. Re-organized the ISA standalone and non-standalone (INMOS) sides of the chips so that they work properly and remove the FILE rom loading hack from init.
3. The Memory Mapped R/W sides now account for instance in their address range.
4. INMOS only: prevent any ROM address access to anything lower than 0xc8000 to not conflict with the main BIOS rom loading.
5. Fixed native pitch by using the correct register, this fixes non 1024x768 resolutions under NT.
6. More logs when enabled to see any future bugs.
IBM 8514/A set:
Fixed a one off video bug that was causing the VGA video to not be restored after quitting a 8514/A GUI session (namely on Win2.x' 8514/A's driver).
ATI Mach32:
Fixed another vertical display issue when activated (in 1280x1024 mode, when 1024 was 1022).
All involved:
Apply RG's changedvram fix to 8514/A, Mach8/32 and XGA's changedvram pointers.
1. Corrected the ATI 1881x clocks for use with the ATI Mach8/32 and VGA Wonder chips. The CPU slowdowns should now be gone.
2. Merged I/O ports common to both the ATI and IBM 8514/A compatible chips where they have identical code (extended behavior is still separate). Code duplication is now less than before.
3. Fixed a general polygon pattern issue in the Mach8/32 affecting calc.exe in Win3.x and other stuff.
4. Mode changes are, once again, changed (ATI and IBM), as close as possible to the real thing without destroying existing resolutions.
5. The 8514/A Vertical Counter has been extended to 0xfff so that it can take 1280x1024 resolutions well offered by the Mach32 as well as a better way to change the IBM/ATI modes through a callback swap where approprietate.
6. in 8514/A mode, reads from the 0x3c6-0x3c9 ramdac range is redirected to the 8514/A RAMDAC (0x2ea-0x2ed).
7. LFB access in the Mach32 now no longer takes account of the SVGA derived rops. Fixes Mach32 display on NeXTSTEP/OPENSTEP 3.x/4.x
8. Reworked the Display Sense Status and Subsystem Status ports so that they're not copycats from MAME and instead follow the datasheet.
IBM/ATI 8514/A side:
Made mode switches more immediate when actually switching from VGA to 8514/A and viceversa.
Tseng ET4000AX/W32 series side:
Actually use bit 2 of index 0x3f for the horizontal blank start bit 8 instead of bit 4 (horizontal retrace start), fixes skew issues with the et4000w32i rev B. card with resolutions like 1024x768 at 15 or 16bpp and others.
1. Second attempt to fix the banking in the Cirrus (sigh, why doesn't banking get nulled automatically...)
2. Introduce a new timer to the 8514/A side so it won't slow the VGA clock down it was shared before.
1. Cleanups and moving the mach8/32 struct to a dedicated header so that would allow for future 8514/A add-on clones (in paper).
2. Mach8/32's port 0x4ae8/9 and shadow set ports (0x5aee and 0x46ee) now account to the mode changes seriously, should fix most of the horizontal/vertical coordinates while entering GUI modes of various stuff.
3. Horizontal/Vertical window coordinates can only be modified if the display enable bit of port 0x22e8 is set as well as bit 0 of port 0x4aee, fixes most problems noted above.
4. Implemented horizontal blanking stuff a la VGA but actually for 8514/A and clones (like ATI).
5. Added some comments regarding the current situation.
6. The Mach8 was actually a 8514/A clone co-processor, not a single solution card of its own. The ATI Graphics Ultra was a single solution card that is actually a Mach8 + ATI 28800-6 in one, so renaming it accordingly.
7. Fixed garbled/distorted acceleration when device bitmap acceleration is enabled in the ATI Mach8 3.0 Win3.1 drivers.
1. Properly implemented polygon filling in the BitBLT side of the ATI 8514/A compatibles (Mach8/32), this allows games like Mj8514 and demos like HDIDEMO from IBM to run under ATI's hdiload 1.1 properly.
2. Finally figured out the polygon filling command in the IBM one about read and write masks (Command 5 and Command 2 with polygon filling bits on, currently only for the read mask one), this allows the above samples to render properly with IBM's original hdiload 1.0 from 1987.
1. Made the 4 color mode (67h) work properly now, including its 4 schemes on all ATI cards that support said mode.
2. Shadow set now has a true purpose for 8514/A compatibility on ATI Mach8/32.
3. Non-ATI 8514/A used to not work before because of the dev->local variable was not being set to 0 in the ibm8514_init() function, now it's fixed.
1. For some reason, background colors were always black under those drivers in 8bpp mode, added a tweak to fix it (as well as Clock colors).
2. Likewise for the red scrolling in pbrush or write, added a tweak to its bitblt read mask.
3. Don't call svga_recalctimings in the hdisp/vdisp ports directly, fixes screen size on said drivers without affecting other stuff.
1. Fixed wrong setting of highres and lowres mode of 8bpp, makes Transport Tycoon run properly on these ATI cards again.
2. 32-bit (RGBA) True Color is actually supported on the Mach32, but barely used, and the original code was wrong. This fix makes 32-bit True Color render the right colors.
1. Update svga->fast to account for packed chain mode toggles, fixes issues on Descent II for DOS using the Cirrus cards.
2. Re-organized ATI Mach8/32 LFB access as well as 8514/A/ATI mode toggles, should end the video mode issues once and for all.
3. Fixed a small but major pattern issue with IBM OS/2 1.30.1's XGA driver (not .2, which is fine as is).
1. Made the 8514/A mode switch to VGA and viceversa (including ATI mode) actually usable and eliminating the last bugs related to them. Fixes 8514/A mode in OS/2 1.x/2.x (both IBM and Microsoft).
2. More sanity checks to the 8514/A and XGA pointers. Should fix emulator crashes on hard resets.
1. Cirrus Logic GD54xx, Paradise/WD VGA now reset the interlace once a text mode is issued if not done automatically.
2. Paradise/WD's 15/16bpp modes using the 800x600 resolution now have the correct ma_latch, should fix most operating systems drivers using this combo.
3. More fixes (hopefully) to the accelerated pitch and rowoffset of the Trident TGUI cards (9440AGi and 96x0XGi), should fix issues with delayed displays mode changes under various operating systems (e.g.: Win3.1x).
4. Preliminary implementation of the Area Fill command of XGA, which is issued while using various painting and/or calc utilities on Win3.1x (IBM XGA updated drivers, e.g.: 2.12).
5. Preliminary (and incomplete) 4bpp XGA mode.
6. The XGA memory test for the 0xa5 using writes (used by various operating systems) no longer conflicts with DOS' XGAKIT's memory detection.
7. Small ROP fixes to both XGA and 8514/A.
8. Re-organized the mapping of the Mach32 chipset, especially when to enable the ATI mode or switching back to IBM mode, should fix LFB conflicts with various operating systems.
9. According to The OS/2 Museum, the Adaptec AHA-154xB series of SCSI cards fail the ASPI4DOS.SYS 3.36 signature check, so now make the changes accordingly.
10. Remove useless and crashy bios-less option of the Trantor T128.
11. The Image Manager 1024 card can also be used on a XT (although only if it has a V20/V30).
12. Re-organized the IBM PS/2 model 60 initialization as well as its right POS machine ID (though an update to sc.exe is still required for the POST memory amount to work normally).
Replaced svga->bpp == 24 with dev->accel_bpp == 24 as well as proper ATI graphics engine offsets added to 24bpp mode in the 8514/A rectangle fill commands (cmd 2, 3, 4) as well as on a command val of 8514/A bitblt (mainly 0xc2b5, actual cmd 6). This should fix 24bpp mode under Windows/NT and other operating systems, like OS/2 2.x/Warp.
* separate (ibm8514|xga)_enabled into (ibm8514|xga)_standalone_enabled
and (ibm8514|xga)_active, the former being enabled only for standalone
8514/A or XGA cards, the latter for all 8514/A and XGA-capable cards
and not saved into the config file;
* remove (ibm8514|xga)_has_vga and replace all uses of it with
(ibm8514|xga)_standalone_enabled;
* Qt UI: the checkboxes for standalone 8514/A and XGA are now correctly
grayed out if an (S)VGA card with 8514/A or XGA capability is selected,
including cases when the card is an internal/onboard one; said cards are
now no longer appear as SVGA multi-monitor compatible.
1. Hopefully fixed the passthrough stuff for good and fixed typo's in the IBM 8514/A poll function about the cursor.
2. Eliminated the ibm8514_on global variable in favor of a struct variable to be consistent with XGA.
1. The passthrough from VGA to 8514/A and/or 8514/A to VGA no longer relies on hackish places where to switch from/to, instead, relying on port 0x3c3 of VGA doing so (though the Mach8/32 still needs some places where to manually switch from/to, mainly the MCA one when configuring the EEPROM).
2. Implemented the MCA behalf of the Mach32 and its corresponding reset function.
3. Properly implemented (more or less) true color, including 24-bit BGR rendering
4. Other fixes such as color patterns and mono patterns being more correct than before in various operating systems and in 24-bit true color.
5. Implemented the onboard Mach32 video of the IBM PS/ValuePoint P60 machine.
6. Made the onboard internal video detect when it's 8514/A compatible or not (CGA/EGA/MDA/VGA/etc.). If the former is selected, then the video monitor flag is used instead (for QT).
7. The TGUI9400 and 9440, if on VLB, now detect the right amount of memory if on 2MB.
8. Initial implementation of the ATI 68875 ramdac used by the Mach32 and made the ATI 68860 8514/A aware when selected with the Mach32AX PCI.
9. Separated the 8514/A ramdac ports from the VGA ramdac ports, allowing seamless transition from/to 8514/A/VGA.
10. Fixed a hdisp problem in the ET4000/W32 cards, where it was doubling the horizontal display in 15bpp+ graphics mode.
11. Removed the 0x3da/0x3ba port hack that was on the Mach8/32 code, relying on the (S)VGA core instead.
12. Reworked and simplified the TGUI9440 pitch register based on logging due to no documentation at all.
