Fixes to various hard disk controllers;
Added the Packard Bell PB640;
Fixed the InPort mouse emulation - now it works correctly on Windows NT 3.1;
Removed the status window and the associated variables;
Completely removed the Green B 486 machine;
Fixed the MDSI Genius;
Fixed the single-sided 5.25" floppy drive;
Ported a CPU-related commit from VARCem.
Added internal graphics card option for the Intel Advanced/EV for the on-board S3 Trio64;
Fixed configuration for internal graphics card options (using the machine's Configure button) for some machines (PCjr, Tandy 1000, Tandy 1000 HX, and now also the Intel Advanced/EV).
IBM.H is gone, video stuff re-organized. Keyboard stuff reorganized.
Machines that have their own video, mouse and/or keyboard now have all this in their machine file.
Fixed and other cleanups here and there.
NVR masks are now stored in the model struct;
More AX JEGA work, still not hooked anywhere;
Fixed a stray wsprintf() in win.c to the correct _swprintf() instead;
Loading a configuration file from the menu now causes the status bar to be updated.
Thoroughly clean up the code to vastly reduce the number of compiler warnings and found and fixed several bugs in the process;
Applied all mainline PCem commits;
Added SCSI hard disk emulation;
Commented out all unfinished machines and graphics cards;
Added the AOpen AP53 and ASUS P/I-P55T2 machines as well as another Tyan 440FX machine, all three with AMI WinBIOS (patch from TheCollector1995);
Added the Diamond Stealth 3D 3000 (S3 ViRGE/VX) graphics card (patch from TheCollector1995);
Added the PS/2 XT IDE (AccuLogic) HDD Controller (patch from TheCollector1995);
Added Microsoft/Logitech Bus Mouse emulation (patch from waltje);
Overhauled the makefiles (patch from waltje);
Added the Adaptec AHA-1542CF SCSI controller (patch from waltje);
Added preliminary (but still unfinished) Adaptec AHA-154x SCSI controller BIOS support (patch from waltje);
Added an ISABugger debugging device (patch from waltje);
Added sanity checks to the Direct3D code.
Added Intel Advanced/ZP;
Added Commodore PC 60 III;
Fixed Force 4:3 option when overscan is not enabled;
Added option to scale (0.5x, 1x, 1.5x, 2x) the video output;
Added ability to disable ATAPI DMA for CD-ROM drives;
Applied all mainline PCem commits;
Store network card in config file as name rather than number;
Fixed NVR storing for IBM PS/2 Models 2121 and 2121+ISA.
Added experimental NVidia Riva TNT2 emulation (patch from MoochMcGee);
ASUS P/I-P54TP4XE, ASUS P/I-P55T2P4, and ASUS P/I-P55TVP4 are back;
National Semiconductor PC87306 Super I/O chip now correctly reenables devices after a chip power cycle;
Several FDC improvements and the behavior is now a bit closer to real hardware (based on actual tests);
Added MR Intel Advanced/ATX with Microid Research BIOS with support for 4 floppy drives and up to 4 IDE controllers;
Added floppy drives 3 and 4, bringing the maximum to 4;
You can now connect hard disks to the tertiary IDE controller;
Correct undocumented behavior of the LEA instruction with register is back on 286 and later CPU's;
Pentium-rea models with Intel chipsets now have port 92 (with alternate reset and alternate A20 toggle);
Overhauled DMA channel read and write routines and fixed cascading;
Improved IMG detection of a bad BPB (or complete lack of a BPB);
Added preliminary emulation of PS/2 1.44 MB and PC-98 1.25 MB 3-mode drives (both have an inverted DENSEL pin);
Removed the incorrect Amstrad mouse patch from TheCollector1995;
Fixed ATAPI CD-ROM disk change detection;
Windows IOCTL CD-ROM handler now tries to use direct SCSI passthrough for more things, including obtaining CD-ROM capacity;
The Diamond Stealth32 (ET4000/W32p) now also works correctly on the two Award SiS 496/497 boxes;
The (S)VGA handler now converts 6-bit RAMDAC RGB channels to standard 8-bit RGB using a lookup table generated at emulator start, calculated using the correct intensity conversion method and treating intensity 64 as equivalent to 63;
Moved a few options from the Configuration dialog box to the menu;
SIO, PIIX, and PIIX3 now have the reset control register on port CF9 as they should;
Several bugfixes.
Brought the Intel Flash emulation in line with mainline PCem;
Removed the Intel Advanced/ML;
Reverted the ET4000/W32p code back to the code from mainline PCem, with fixes to PCI and linear frame buffer addresses according to the datasheet;
Timer counters are now 32-bit again - fixes quite a few bugs.
FDI stream images are now also handled by the 86F handler;
Both floppy drives' motors now spin separately;
Added Plantronics ColorPlus emulation per patch from PCem forum;
Applied all mainline PCem commits;
Fixed several bugs.
Fixed behavior of the FDC RECALIBRATE command for FDC's on certain Super I/O chips;
Several 86F-related fixes;
Added the Intel Advanced/ML (430HX, Socket 7, currently with non-working Flash) and Intel Advanced/ATX (430FX, Socket 7, works perfectly) motherboards;
Fixed handling of DENSEL when the FDC is in National Semiconductors PC87306 mode;
Brought 440FX initialization PCI parameters in line with Bochs;
Brought PIIX3 initialization PCI parameters in line with QEMU.
