1. Corrected the ATI 1881x clocks for use with the ATI Mach8/32 and VGA Wonder chips. The CPU slowdowns should now be gone.
2. Merged I/O ports common to both the ATI and IBM 8514/A compatible chips where they have identical code (extended behavior is still separate). Code duplication is now less than before.
3. Fixed a general polygon pattern issue in the Mach8/32 affecting calc.exe in Win3.x and other stuff.
4. Mode changes are, once again, changed (ATI and IBM), as close as possible to the real thing without destroying existing resolutions.
5. The 8514/A Vertical Counter has been extended to 0xfff so that it can take 1280x1024 resolutions well offered by the Mach32 as well as a better way to change the IBM/ATI modes through a callback swap where approprietate.
6. in 8514/A mode, reads from the 0x3c6-0x3c9 ramdac range is redirected to the 8514/A RAMDAC (0x2ea-0x2ed).
7. LFB access in the Mach32 now no longer takes account of the SVGA derived rops. Fixes Mach32 display on NeXTSTEP/OPENSTEP 3.x/4.x
8. Reworked the Display Sense Status and Subsystem Status ports so that they're not copycats from MAME and instead follow the datasheet.
1. On both Mach'es: direct linear video memory access is now the default for LFB mapping: fixes Mach64 drivers on NeXTSTEP/OPENSTEP and keeps everything else intact.
2. Mach8/32: minor cleanup to mode change code.
Make sure for the 9001st time to display correctly the horizontal side of the display (looking at you, ATI 1992 set for win3.1x and Mach8/32 drivers for OS/2 1.2x).
IBM/ATI 8514/A side:
Made mode switches more immediate when actually switching from VGA to 8514/A and viceversa.
Tseng ET4000AX/W32 series side:
Actually use bit 2 of index 0x3f for the horizontal blank start bit 8 instead of bit 4 (horizontal retrace start), fixes skew issues with the et4000w32i rev B. card with resolutions like 1024x768 at 15 or 16bpp and others.
1. Second attempt to fix the banking in the Cirrus (sigh, why doesn't banking get nulled automatically...)
2. Introduce a new timer to the 8514/A side so it won't slow the VGA clock down it was shared before.
1. Cleanups and moving the mach8/32 struct to a dedicated header so that would allow for future 8514/A add-on clones (in paper).
2. Mach8/32's port 0x4ae8/9 and shadow set ports (0x5aee and 0x46ee) now account to the mode changes seriously, should fix most of the horizontal/vertical coordinates while entering GUI modes of various stuff.
3. Horizontal/Vertical window coordinates can only be modified if the display enable bit of port 0x22e8 is set as well as bit 0 of port 0x4aee, fixes most problems noted above.
4. Implemented horizontal blanking stuff a la VGA but actually for 8514/A and clones (like ATI).
5. Added some comments regarding the current situation.
6. The Mach8 was actually a 8514/A clone co-processor, not a single solution card of its own. The ATI Graphics Ultra was a single solution card that is actually a Mach8 + ATI 28800-6 in one, so renaming it accordingly.
7. Fixed garbled/distorted acceleration when device bitmap acceleration is enabled in the ATI Mach8 3.0 Win3.1 drivers.
1. Properly implemented polygon filling in the BitBLT side of the ATI 8514/A compatibles (Mach8/32), this allows games like Mj8514 and demos like HDIDEMO from IBM to run under ATI's hdiload 1.1 properly.
2. Finally figured out the polygon filling command in the IBM one about read and write masks (Command 5 and Command 2 with polygon filling bits on, currently only for the read mask one), this allows the above samples to render properly with IBM's original hdiload 1.0 from 1987.
1. Apparently some stuff uses read-only port 0x86ee and expects it to return 0 while port 0xf6ee is an alias to 0x82e8, this should fix hangs in Majong 8514 using ATI's DOS drivers.
2. 8514 data available bits are reset properly when new parameters for a new command are installed (port 0xCEEE), fixes remaining hangs with some stuff.
1. For some reason, background colors were always black under those drivers in 8bpp mode, added a tweak to fix it (as well as Clock colors).
2. Likewise for the red scrolling in pbrush or write, added a tweak to its bitblt read mask.
3. Don't call svga_recalctimings in the hdisp/vdisp ports directly, fixes screen size on said drivers without affecting other stuff.
1. Fixed wrong setting of highres and lowres mode of 8bpp, makes Transport Tycoon run properly on these ATI cards again.
2. 32-bit (RGBA) True Color is actually supported on the Mach32, but barely used, and the original code was wrong. This fix makes 32-bit True Color render the right colors.
1. Update svga->fast to account for packed chain mode toggles, fixes issues on Descent II for DOS using the Cirrus cards.
2. Re-organized ATI Mach8/32 LFB access as well as 8514/A/ATI mode toggles, should end the video mode issues once and for all.
3. Fixed a small but major pattern issue with IBM OS/2 1.30.1's XGA driver (not .2, which is fine as is).
1. Made the 8514/A mode switch to VGA and viceversa (including ATI mode) actually usable and eliminating the last bugs related to them. Fixes 8514/A mode in OS/2 1.x/2.x (both IBM and Microsoft).
2. More sanity checks to the 8514/A and XGA pointers. Should fix emulator crashes on hard resets.
ATI Mach64 is temporarily unthreaded because of blitter desyncing.
ATI Mach32 now returns to ATI mode from IBM mode and vice versa more correctly.
Make the IBM 8514/A compatible poll not run if a 3D add-on card (Voodoo1/2) takes precedence (seen on a Mach32 PCI and Voodoo2 3D combo).
Finally ended the mess ups of the TGUI9440/96x0 pitch, it actually was the CRTC offset reg (SVGA CRTC 0x13) that defined it with some shifting based on the BPP.
1. Cirrus Logic GD54xx, Paradise/WD VGA now reset the interlace once a text mode is issued if not done automatically.
2. Paradise/WD's 15/16bpp modes using the 800x600 resolution now have the correct ma_latch, should fix most operating systems drivers using this combo.
3. More fixes (hopefully) to the accelerated pitch and rowoffset of the Trident TGUI cards (9440AGi and 96x0XGi), should fix issues with delayed displays mode changes under various operating systems (e.g.: Win3.1x).
4. Preliminary implementation of the Area Fill command of XGA, which is issued while using various painting and/or calc utilities on Win3.1x (IBM XGA updated drivers, e.g.: 2.12).
5. Preliminary (and incomplete) 4bpp XGA mode.
6. The XGA memory test for the 0xa5 using writes (used by various operating systems) no longer conflicts with DOS' XGAKIT's memory detection.
7. Small ROP fixes to both XGA and 8514/A.
8. Re-organized the mapping of the Mach32 chipset, especially when to enable the ATI mode or switching back to IBM mode, should fix LFB conflicts with various operating systems.
9. According to The OS/2 Museum, the Adaptec AHA-154xB series of SCSI cards fail the ASPI4DOS.SYS 3.36 signature check, so now make the changes accordingly.
10. Remove useless and crashy bios-less option of the Trantor T128.
11. The Image Manager 1024 card can also be used on a XT (although only if it has a V20/V30).
12. Re-organized the IBM PS/2 model 60 initialization as well as its right POS machine ID (though an update to sc.exe is still required for the POST memory amount to work normally).
1. Hopefully fixed the passthrough stuff for good and fixed typo's in the IBM 8514/A poll function about the cursor.
2. Eliminated the ibm8514_on global variable in favor of a struct variable to be consistent with XGA.
1. The passthrough from VGA to 8514/A and/or 8514/A to VGA no longer relies on hackish places where to switch from/to, instead, relying on port 0x3c3 of VGA doing so (though the Mach8/32 still needs some places where to manually switch from/to, mainly the MCA one when configuring the EEPROM).
2. Implemented the MCA behalf of the Mach32 and its corresponding reset function.
3. Properly implemented (more or less) true color, including 24-bit BGR rendering
4. Other fixes such as color patterns and mono patterns being more correct than before in various operating systems and in 24-bit true color.
5. Implemented the onboard Mach32 video of the IBM PS/ValuePoint P60 machine.
6. Made the onboard internal video detect when it's 8514/A compatible or not (CGA/EGA/MDA/VGA/etc.). If the former is selected, then the video monitor flag is used instead (for QT).
7. The TGUI9400 and 9440, if on VLB, now detect the right amount of memory if on 2MB.
8. Initial implementation of the ATI 68875 ramdac used by the Mach32 and made the ATI 68860 8514/A aware when selected with the Mach32AX PCI.
9. Separated the 8514/A ramdac ports from the VGA ramdac ports, allowing seamless transition from/to 8514/A/VGA.
10. Fixed a hdisp problem in the ET4000/W32 cards, where it was doubling the horizontal display in 15bpp+ graphics mode.
11. Removed the 0x3da/0x3ba port hack that was on the Mach8/32 code, relying on the (S)VGA core instead.
12. Reworked and simplified the TGUI9440 pitch register based on logging due to no documentation at all.
