CD-ROM side: fixed a mode sense page (0x08 Sony, used by both Sony and Texel drives) as well as corrected the Toshiba specific drive speeds (bytes_per_second).
NCR 5380 side: split the work into the generic 5380 core and the ASICs into separate sources (53c400 and T128) and added the T228 MCA adapter based on the 128.
1. Added Mode Page Codes 0x00 and 0x03 (Unit Attention and Format Device) to the SCSI CD-ROM code.
2. Corrected the Read Disc Information TOC (actually Read TOC vendor unique) for NEC SCSI CD-ROMs, this, together with the fix above, fixes reading data cd-rom's using NEC vendor commands.
3. Actually identify NEC drives per manual (SCSI unknown version per the -75 and -77 manuals).
4. Re-added the 75 and 77 drives now that the NEC vendor commands are fine + an extra 25a drive with revision 1.0a (from a screenshot from vogons).
Fixed the Spock SCSI ID selection.
Fixed CD Audio on NCR 5380-based SCSI controllers.
Added a proprietary CD-ROM controller selection (not hooked up yet).
All on qt only.
Roughly implemented the SCSI IDENTIFY message LUN operation, fixes some SCSI controller drivers in some situations;
Added an undocumented CMD640 IDE controller register required by Linux and by a DOS driver.
- 86Box's own headers go to /86box
- munt's public interface goes to /mt32emu
- all slirp headers go to /slirp (might want to consider using only its public inteface)
- single file headers from other projects go in include root
