Commit Graph

28 Commits

Author SHA1 Message Date
OBattler
a412ceb4d9 Applied all relevant PCem commits;
Extensively cleaned up and changed the CD-ROM code;
Removed CD-ROM IOCTTL (it was causing performance and stability issues);
Turned a lot of things into device_t's;
Added the PS/1 Model 2011 XTA and standalone XTA hard disk controllers, ported from Varcem;
Numerous FDC fixes for the PS/1 Model 2121;
NVR changes ported from Varcem;
The PCap code no longer requires libpcap to be compiled;
Numerous fixes to various SCSI controllers;
Updated NukedOPL to 1.8;
Fixes to OpenAL initialization and closing, should give less Audio issues now;
Revorked parts of the common (S)VGA code (also based on code from QEMU);
Removed the Removable SCSI hard disks (they were a never finished experiment so there was no need to keep them there);
Cleaned up the SCSI hard disk and Iomega ZIP code (but more cleanups of that are coming in the future);
In some occasions (IDE hard disks in multiple sector mode and SCSI hard disks) the status bar icon is no longer updated, should improve performance a bit;
Redid the way the tertiary and quaternary IDE controllers are configured (and they are now device_t's);
Extensively reworked the IDE code and fixed quite a few bugs;
Fixes to XT MFM, AT MFM, and AT ESDI code;
Some changes to XTIDE and MCA ESDI code;
Some fixes to the CD-ROM image handler.
2018-04-25 23:51:13 +02:00
OBattler
b1efb99ed6 Applied a whole slew of patches, getting RAM usage down by a further 10 MB. 2018-03-19 01:02:04 +01:00
TC1995
0b02fc37bc Ported the most relevant PCem commits to 86Box. 2018-03-11 18:26:44 +01:00
OBattler
99d22c3c03 Added the Xi8088. 2018-03-02 20:47:18 +01:00
OBattler
b7120def92 Added the GW-286CT GEAR, Samsung SPC-4216P, and KMX-C-02 (SCAT machines). 2018-03-02 20:03:33 +01:00
OBattler
6e823e6232 Added the Toshiba T1000 and T1200. 2018-03-02 19:33:02 +01:00
OBattler
4677cf600b The Intel Flash device with inverted high bit pin now again correctly responds to reads and writes on the high BIOS mapping, fixes programming the Flash with the AMI BIOS Flash utility;
Added internal graphics card option for the Intel Advanced/EV for the on-board S3 Trio64;
Fixed configuration for internal graphics card options (using the machine's Configure button) for some machines (PCjr, Tandy 1000, Tandy 1000 HX, and now also the Intel Advanced/EV).
2018-02-09 05:42:40 +01:00
OBattler
cc7579b898 Moved the two Laser XT machines to the Dev branch. 2018-01-28 17:56:32 +01:00
OBattler
25a0860011 The IBM AT and the IBM XT 286 now have a FDC again. 2018-01-24 00:35:52 +01:00
OBattler
1d4fed2110 Improved 8042 (AT and PS/2 keyboard controller emulation), no more hacks, split into various devices depending on vendor (generic, AMI, IBM (MCA), Quadtel, Toshiba), and fixed several commands - hopefully fixes all existing AT+ keyboard problems (such as incorrect scan codes on some machine under some circumstances);
Fixed a bug in the SMC FDC37C932 emulation, fixes the FDC on the two Acer machines;
Re-added some Acer-specific I/O port handlers, fixes entry into CMOS Setup on the two Acer machines.
2018-01-04 07:44:33 +01:00
OBattler
b7501e3b5f Fixed the last compile-breaking mistakes. 2018-01-01 03:40:59 +01:00
OBattler
d9e7f0c4fc Renamed the Paradise WD90C11 Standalone to Paradise WD90C11-LR and made it use the correct BIOS;
Added the Paradise PVGA1A (standalone) and the Paradise WD90C30-LR, both with configurable video memory;
Added the Toshiba T3100e.
2017-12-31 06:37:19 +01:00
OBattler
1acde00754 Reverted the NCR 53C810 to non-threaded code (but still cleaned it up), a bit slower but at least it works with everything that has been tested;
Moved the Green B 486 machine to the Dev branch.
2017-12-25 17:57:05 +01:00
waltje
90c13dd25f Added new machine (4GPV31) 2017-12-04 14:50:58 -05:00
OBattler
e0030bc93c The Compaq Portable III and III/386 now have the Olivetti M24 display adapter (though pending implementation of Compaq-specific registers);
Bugfixes in config.c regarding CD-ROM defaults and IDE channel reading;
Applied all the PCem Voodoo commits;
The Sound Blaster cards' OPL can now be disabled for slight performance gain.
2017-11-22 18:14:27 +01:00
waltje
1562c8bb99 Updated EuroPC NVR handling. 2017-11-19 22:00:08 -05:00
waltje
bc1f1f9e4b More cleanups.
Split Compaq Deskpro off to separae file. Renamed PIIX files to intel_ prefix.
Re-enabled Compaq machines; the Portable II works fine now.
2017-11-12 03:07:01 -05:00
waltje
1e470fe49d Restored Compaq Portable II and III machines, changes by TheCollector1995. Good job! 2017-11-11 16:03:24 -05:00
waltje
006639fe5a Re-integration of the Tandy-1000 based machines. 2017-11-10 23:47:21 -05:00
waltje
b8d75f4f5a Changed the machines to use a table file. 2017-11-08 16:27:52 -05:00
waltje
7c67e867c8 Major commit, cleaning a lot of old stuff.
IBM.H is gone, video stuff re-organized. Keyboard stuff reorganized.
Machines that have their own video, mouse and/or keyboard now have all this in their machine file.
Fixed and other cleanups here and there.
2017-11-05 02:00:50 -05:00
waltje
b40ea14027 Cleanup, moving stuff out of ibm.h and such. Moved more configuration variables into main. Minor changes for multiplatform. 2017-11-02 02:39:30 -05:00
waltje
97b3ca3430 Fix for ROMs not loading properly on many machines - my bad. 2017-10-13 02:42:15 -04:00
OBattler
cf40a3c8f4 Added MACHINE_CBUS #define, as well as DEVICE_ISA, DEVICE_CBUS, and DEVICE_EISA. 2017-10-08 05:43:44 +02:00
waltje
ffa22a216c More general changes and cleanups, mostly in machine/ now. Also updated SCSI and Network device drivers to use new device init method. 2017-10-07 22:19:11 -04:00
waltje
2dbf5409c0 Changes to allow for auto- or selectable Internal HD controller, and some other minor changes. 2017-10-01 16:29:27 -04:00
waltje
ef677295f7 Finalized changing the 286-based systems to have an "internal ide" controller; these machines now have to select the desired HD controller from the menu. The Samsung 286 machine also needs its upper 384K remapped. Added machine_at_scat_remap() to implement thjs for SCAT-based boards. 2017-09-18 22:39:02 -04:00
OBattler
3e10570bbd Machine code restructure, models are now machines instead and the init functions are in the machine files rather than in machine.c (former model.c), also moved the machine stuff into the machine/ subdirectory. 2017-09-02 20:39:57 +02:00