The BusLogic BT-958D PCI SCSI controller now optionally uses a BIOS (supports up to eight SCSI hard disks, up to 8 GB each);
Fixed some BusLogic commands;
The BusLogic SCSI controllers now use 15 as the host adapter ID.
Disabled the Nation Semiconductors PC87306's IDE handler, the board replaces it with the PCI IDE device anyway;
The Commodore PC 300 now remaps the top 384k of RAM;
The network card is now initialized after the SCSI controller;
The graphics cards remain on the INTA pin, but the network card is now on INTC, and the SCSI controller on INTB;
S3 Vision/Trio emulation brought completely in line with mainline PCem, fixes Windows 2000 freezes.
Ported the Roland MT-32 emulation (using MUNT) from bit's MT32 emulation branch of PCem;
Sanitized the OpenAL give buffer code in openal.c a bit;
NVR path is now specifiable in the Settings dialog;
Added Logitech 3-button serial mouse per protocol description by waltje;
The RTL8029AS and the BT-958D now actually use the PCI IRQ routing;
Fixed BT-958D PCI device initialization on the bus;
PCI IRQ routing now respects the edge/level setting set on ports 4D0/4D1.
Fixed some bugs regarding the Winbond W83877F Super I/O Chip and serial ports;
Added the President Award 430FX PCI machine, thank you ashenone for the BIOS.
HDD controller initializer now ignores non-IDE controllers if the specified model has IDE;
The RTL8029AS NIC and BusLogic BT-958D SCSI controller are now APIC-aware.
Fixed all the reported bugs regarding the Settings dialog;
MIDI out device is now no longer reset to 0 after hard reset;
Removed all vestiges of the old disk activity flash;
The configuration file is no longer saved when it shouldn't be;
Redone the status bar icon updating so it is only done in win.c;
Made sure all variables in ibm.h are extern;
A lot of other bugfixes;
Added Mouse Systems Mouse emulation (patch from TheCollector1995);
Added IBM PS/1 Model 2133 (486) emulation (patch from TheCollector1995);
Tweaked the CPU dynamic recompiler cycle periods - 486SX 33 and 486DX 33 now work;
Increased compatibility with configuration files from before the previous commit.
Applied the mainline PCem slight CPU emulation speedup commit;
Added emulation of removable SCSI hard disks;
CD-ROM image handler now uses C FILE's (with the 64-bit size calls) instead of C++ iostreams, ISO images bigger than 2 GB should work properly again;
Split RLL/ESDI and XT IDE disks to their own bus types;
Turned status bar pane meaning and hard disks and CD-ROM BUS numbers to #define's;
Other miscellaneous cleanups.
Overhauled the configuration files so that the global variables are now subdivided into sections;
Fixed CD-ROM MODE SENSE page 0x2A which was being incorrectly reported as not implemented, fixes among other things Rayman 1 and Spellcross: The Last Battle (both now see the CD-ROM and play CD Audio fine).
A few CD-ROM IOCTL commands are cached now;
CD Audio over IOCTL works again;
The status bar icons are now only loaded once at emulator start, and subsequently just used on demand.
Thoroughly clean up the code to vastly reduce the number of compiler warnings and found and fixed several bugs in the process;
Applied all mainline PCem commits;
Added SCSI hard disk emulation;
Commented out all unfinished machines and graphics cards;
Added the AOpen AP53 and ASUS P/I-P55T2 machines as well as another Tyan 440FX machine, all three with AMI WinBIOS (patch from TheCollector1995);
Added the Diamond Stealth 3D 3000 (S3 ViRGE/VX) graphics card (patch from TheCollector1995);
Added the PS/2 XT IDE (AccuLogic) HDD Controller (patch from TheCollector1995);
Added Microsoft/Logitech Bus Mouse emulation (patch from waltje);
Overhauled the makefiles (patch from waltje);
Added the Adaptec AHA-1542CF SCSI controller (patch from waltje);
Added preliminary (but still unfinished) Adaptec AHA-154x SCSI controller BIOS support (patch from waltje);
Added an ISABugger debugging device (patch from waltje);
Added sanity checks to the Direct3D code.
