Redid the way SCSI and ATAPI devices are handled;
Slight timings change in the NCR 5380;
Devices are now closed by device_close_all() in the reverse order of the one in which they were started;
Slight changes to some code in win/;
Added the WM_HARDRESET and WM_SHUTDOWN window messages for configuration manager purposes.
Several bugfixes in disk/hdd_image.c - image creation on emulator start (if image not present) no longer creates too small images and creaters VHD footers with the correct CHS values.
Several bug fixes;
Preliminar addition of the SDL 2 renderer (does not yet work correctly in full screen mode);
SCSI devices no longer have configurable LUN's (this matches the configurability of real SCSI devices);
SCSI LUN's are now handed by the device's handler;
Removed all unused strings;
Removed some unused code files;
Significantly rewrote the bus mouse emulation.
Fixes to various hard disk controllers;
Added the Packard Bell PB640;
Fixed the InPort mouse emulation - now it works correctly on Windows NT 3.1;
Removed the status window and the associated variables;
Completely removed the Green B 486 machine;
Fixed the MDSI Genius;
Fixed the single-sided 5.25" floppy drive;
Ported a CPU-related commit from VARCem.
Extensively cleaned up and changed the CD-ROM code;
Removed CD-ROM IOCTTL (it was causing performance and stability issues);
Turned a lot of things into device_t's;
Added the PS/1 Model 2011 XTA and standalone XTA hard disk controllers, ported from Varcem;
Numerous FDC fixes for the PS/1 Model 2121;
NVR changes ported from Varcem;
The PCap code no longer requires libpcap to be compiled;
Numerous fixes to various SCSI controllers;
Updated NukedOPL to 1.8;
Fixes to OpenAL initialization and closing, should give less Audio issues now;
Revorked parts of the common (S)VGA code (also based on code from QEMU);
Removed the Removable SCSI hard disks (they were a never finished experiment so there was no need to keep them there);
Cleaned up the SCSI hard disk and Iomega ZIP code (but more cleanups of that are coming in the future);
In some occasions (IDE hard disks in multiple sector mode and SCSI hard disks) the status bar icon is no longer updated, should improve performance a bit;
Redid the way the tertiary and quaternary IDE controllers are configured (and they are now device_t's);
Extensively reworked the IDE code and fixed quite a few bugs;
Fixes to XT MFM, AT MFM, and AT ESDI code;
Some changes to XTIDE and MCA ESDI code;
Some fixes to the CD-ROM image handler.
FDC reads and writes now use up ISA cycles;
Fixed Mach64 mono-source blits, fixes NT 3.1 and 3.5 drivers;
Incresed maximum emulated CD-ROM speed to 72x;
Fixed a minor bug in the Cirrus Logic CL-GD 54xx emulation.
Replaced the Cirrus Logic code with the latest code from TheCollector1995 - the CL-GD 5428 is now fully working, as is the CL-GD 5429;
Minor clean-up in the AHA/BusLogic BIOS commands code;
Slightly rewritten mem_readb_phys_dma() and mem_writeb_phys_dma().
Fixed the MODE SELECT (6) command for CD-ROM and SCSI disk;
Implemented REQUEST SENSE with DESC bit set for SCSI disk;
Implemented the SCSI RESERVE, SCSI RELEASE, and SEND DIAGNOSTIC commands for SCSI disk.
Fixed Sound Blaster 16 and earlier CD-ROM volume registers (and made them no longer default to 0);
Serial mouse now resets the FIFO before sending the ID, fixes mouse detection after clipping and moving the mouse;
Rewritten CD-ROM and SCSI disk Mode Select handling and changed things regarding Mode Sense as well, also fixes emulator segmentation faults when anything attempts to do a Mode Select;
Fixed the Microsoft InPort mouse emulation (used the Bochs code as reference for the polling/state update code), now it actually moves;
The PCjr initialization now sets the XT scan code table, makes the keyboard actually work on the PCjr again;
Several bugfixes regarding the Read CD commands, fixes CD Audio in digital mode on Windows ME;
Finally properly fixed the regular CD Audio MSF/LBA conversion mess;
Applied all applicable PCem commits.
