Added the AT&T 2xc498 Precision RAMDAC.
Added 1MB configurations to the Cirrus Logic GD5434 as well as re-organized the memory size options of the other Cirrus cards.
Separated the et4000w32/i blitter from the standard et4000w32p blitter and properly implemented the X/Y Count route.
Added several Diamond Cirrus cards.
Added Number Nine S3 cards (868 and 968-based).
Fixed the WD90c30 1MB modes.
Re-organized the video card names.
Bit 1 is of 0x3DA (read only) is apparently required to make the OS/2 Tseng ET4000W32/i drivers work fine, fixes hangs upon reaching the GUI with said drivers.
Avoid division by zero in the blitter of the ET4000W32/i under OS/2.
Video changes (PVGA):
Fixes mode changes of the PVGA1a, including the built-in video card of the Amstrad 2086/3086.
Improved the banking of the ATI 28800-5 cards (VGA Charger and VGA Wonder XL).
Improved the skew and horizontal display of some of the ET4000W32P cards as well as the cursor.
Made the Oak OTI 077 and PVGA WD90c30 cards use the Sierra 11487 (actually a clone is used in the real cards).
For the WD90c30, changed the way the hack is involved.
Reverted some changes of the S3 Vision/Trio that originally made glitches, now the glitches are gone and the accelerator renders fine.
Re-organized the Sierra 1148x RAMDAC's and added the 11486 (Mark 1).
MCA SVGA cards use the full 32-bit mapping.
Fixed ET4000/W32 (without letters) hardware cursor.
Fixed non-interlaced 1280x1024x8bpp Cirrus mode in the 5434.
Added a note regarding the Radius (HT209) 8bpp render.
Reworked the TGUI9440, but still WIP.
Fixed freezes, once and for all, on win2000 (W32p).
Fixed some graphical glitches under win3.x that were caused by the FIFO (W32p).
Fixed vlb flag, now it loads the VLB rom properly (W32i).
Anything using the ICS ramdacs now has a svga->clock /= 2 in recalctimings (W32p rev c and W32/W32i).
Fixed (at least in a more correct way) software cursor under OS/2 Warp with the s3 trio/vision drivers.
Implemented 128x128 sprite/hwcursor on the et4000w32 cards per manual.
Changes to device_t struct to accomodate the upcoming PCI IRQ arbitration rewrite;
Added device.c/h API to obtain name from the device_t struct;
Significant changes to win/win_settings.c to clean up the code a bit and fix bugs;
Ported all the CPU and AudioPCI commits from PCem;
Added an API call to allow ACPI soft power off to gracefully stop the emulator;
Removed the Siemens PCD-2L from the Dev branch because it now works;
Removed the Socket 5 HP Vectra from the Dev branch because it now works;
Fixed the Compaq Presario and the Micronics Spitfire;
Give the IBM PC330 its own list of 486 CPU so it can have DX2's with CPUID 0x470;
SMM fixes;
Rewrote the SYSENTER, SYSEXIT, SYSCALL, and SYSRET instructions;
Changed IDE reset period to match the specification, fixes#929;
The keyboard input and output ports are now forced in front of the queue when read, fixes a number of bugs, including the AMI Apollo hanging on soft reset;
Added the Intel AN430TX but Dev branched because it does not work;
The network code no longer drops packets if the emulated network card has failed to receive them (eg. when the buffer is full);
Changes to PCI card adding and renamed some PCI slot types, also added proper AGP bridge slot types;
USB UHCI emulation is no longer a stub (still doesn't fully work, but at least Windows XP chk with Debug no longer ASSERT's on it);
Fixed NVR on the the SMC FDC37C932QF and APM variants;
A number of fixes to Intel 4x0 chipsets, including fixing every register of the 440LX and 440EX;
Some ACPI changes.
- 86Box's own headers go to /86box
- munt's public interface goes to /mt32emu
- all slirp headers go to /slirp (might want to consider using only its public inteface)
- single file headers from other projects go in include root
Unified screenshot code and moved it to video.c, it is now independent of both renderer and platform;
The EGA/(S)VGA overscan now also works for CGA, PCjr, Tandy, and CGA-using Amstrads;
Fixed EGA/(S)VGA overscan operation so it works correctly with scrolling and panning;
Fixed 320x200x32K and 320x200x64K modes on the ET4000/W32p;
Fixed the Video 7 1024i chip ID and video memory options, fixes#431;
Fixed a banking bug in the S3 cards, fixes Windows 9x and NeoPaint.
Reworked a few things and re-implemented memory write protection in the SCAT emulation, to require less unusual mappings;
Removed two files that should not be there;
Made sure all graphics cards' memory mappings are mapped as MEM_MAPPING_EXTERNAL;
Added MEM_MAPPING_ROMCS flag to signal that a mapping responds to MEMCS* and made the BIOS and Intel flash mappings use it.
Cleaned up the parallel port emulation, added IRQ support, and made enabling/disabling per port;
Added the Award 430NX and the Intel Classic/PCI (Alfredo, 420TX);
Finished the 586MC1;
Added 8087 emulation;
Moved Cyrix 6x86'es to the Dev branch;
Sanitized/cleaned up memregs.c/h and intel.c/h;
Split the chipsets from machines and sanitized Port 92 emulation;
Added support for the 15bpp mode to the Compaq ATI 28800;
Moved the MR 386DX and 486 machines to the Dev branch;
Ported the new dynamic recompiler from PCem, but it remains in Dev branch until after v2.00;
Ported the new timer code from PCem;
Cleaned up the CPU table of unused stuff and better optimized its structure;
Ported the Open-XT and Open-AT from VARCem, the Open-AT is in the Dev branch;
Ported the XT MFM controller rewrite and adding of more controllers (incl. two RLL ones), from VARCem;
Added the AHA-1540A and the BusTek BT-542B;
Moved the Sumo SCSI-AT to the Dev branch;
Minor IDE, FDC, and floppy drive code clean-ups;
Made NCR 5380/53C400-based cards' BIOS address configurable;
Got rid of the legacy romset variable;
Unified (video) buffer and buffer32 into one and make the unified buffer 32-bit;
Added the Amstead PPC512 per PCem patch by John Elliott;
Switched memory mapping granularity from 16k to 4k (less than 1k not possible due to internal pages);
Rewrote the CL-GD 54xx blitter, fixes Win-OS/2 on the 54x6 among other thing;
Added the Image Manager 1024 and Professional Graphics Controller per PCem patch by John Elliott and work done on VARCem;
Added Headland HT-216, GC-205 and Video 7 VGA 1024i emulation based on PCem commit;
Implemented the fuction keys for the Toshiba T1000/T1200/T3100 enhancement;
Amstrad MegaPC does now works correctly with non-internal graphics card;
The SLiRP code no longer casts a packed struct type to a non-packed struct type;
The Xi8088 and PB410a no longer hang on 86Box when PS/2 mouse is not present;
The S3 Virge on BeOS is no longer broken (was broken by build #1591);
OS/2 2.0 build 6.167 now sees key presses again;
Xi8088 now work on CGA again;
86F images converted from either the old or new variants of the HxC MFM format now work correctly;
Hardware interrupts with a vector of 0xFF are now handled correctly;
OPTi 495SX boards no longer incorrectly have 64 MB maximum RAM when 32 MB is correct;
Fixed VNC keyboard input bugs;
Fixed AT RTC periodic interrupt - Chicago 58s / 73f / 73g / 81 MIDI play no longer hangs with the build's own VTD driver;
Fixed mouse polling with internal mice - Amstrad and Olivetti mice now work correctly;
Triones ATAPI DMA driver now correctly reads a file at the end of a CD image with a sectors number not divisible by 4;
Compaq Portable now works with all graphics cards;
Fixed various MDSI Genius bugs;
Added segment limit checks and improved page fault checks for several CPU instructions - Memphis 15xx WINSETUP and Chicago 58s WINDISK.CPL no longer issue a GPF, and some S3 drivers that used to have glitches, now work correctly;
Further improved the 808x emulation, also fixes the noticably choppy sound when using 808x CPU's, also fixes#355;
OS/2 installer no logner locks up on splash screen on PS/2 Model 70 and 80, fixes#400.
Fixed several Amstead bugs, GEM no longer crashes on the Amstrad 1640, fixes#391.
Ported John Elliott's Amstrad fixes and improvement from PCem, and fixed the default language so it's correctly Engliish, fixes#278, fixes#389.
Fixed a minor IDE timing bug, fixes#388.
Fixed Toshiba T1000 RAM issues, fixes#379.
Fixed EGA/(S)VGA overscan border handling, fixes#378;
Got rid of the now long useless IDE channel 2 auto-removal, fixes#370;
Fixed the BIOS files used by the AMSTRAD PC1512, fixes#366;
Ported the Unicode CD image file name fix from VARCem, fixes#365;
Fixed high density floppy disks on the Xi8088, fixes#359;
Fixed some bugs in the Hercules emulation, fixes#346, fixes#358;
Fixed the SCSI hard disk mode sense pages, fixes#356;
Removed the AMI Unknown 386SX because of impossibility to identify the chipset, closes#349;
Fixed bugs in the serial mouse emulation, fixes#344;
Compiled 86Box binaries now include all the required .DLL's, fixes#341;
Made some combo boxes in the Settings dialog slightly wider, fixes#276.
Moved the BT48x hardware cursor draw function to the RAMDAC's code where it belongs;
Renamed the BT48x RAMDAC code file to vid_bt48x_ramdac.c (was vid_bt485_ramdac.c);
Fixed BT48x 64x64 hardware cursor bugs (caused by the index variable being uint8_t when it should have been uint16_t) introduced in the previous commit.
Removed the ExpertColor S3 Vision868 card;
Rewritten the ICD2061 clock chip and moved the Diamond Stealth 32 back to the main branch as it's now fixed;
Fixed the Y offset of the 64x64 hardware cursor of the Cirrus Logic cards.
