Added the AT&T 2xc498 Precision RAMDAC.
Added 1MB configurations to the Cirrus Logic GD5434 as well as re-organized the memory size options of the other Cirrus cards.
Separated the et4000w32/i blitter from the standard et4000w32p blitter and properly implemented the X/Y Count route.
Added several Diamond Cirrus cards.
Added Number Nine S3 cards (868 and 968-based).
Fixed the WD90c30 1MB modes.
Re-organized the video card names.
Improved the banking of the ATI 28800-5 cards (VGA Charger and VGA Wonder XL).
Improved the skew and horizontal display of some of the ET4000W32P cards as well as the cursor.
Made the Oak OTI 077 and PVGA WD90c30 cards use the Sierra 11487 (actually a clone is used in the real cards).
For the WD90c30, changed the way the hack is involved.
Reverted some changes of the S3 Vision/Trio that originally made glitches, now the glitches are gone and the accelerator renders fine.
Re-organized the Sierra 1148x RAMDAC's and added the 11486 (Mark 1).
MCA SVGA cards use the full 32-bit mapping.
Added a timer to improve perfomance of the 3D engine.
Made the Trio3D/2X available for all.
Reserved bit 2 of CR33 is now always set to make sure Win95's Trio3d/2X drivers work along with a workaround for the memory size.
Added preliminary DMA bus master capabilities.
Fixed Chicago 73x (73f/g and 81)'s width/pitch in 15bpp mode using its built-in drivers at 800x600 using the 928.
Vastly improved implementation of the Short Stroke Vectors.
Removed threading for FIFO mode in the cards using the 964 chips and up.
Implementation of the non-threaded FIFO for cards using the 964 chips and up. Should fix most remaining wallpaper issues with those chips.
Improved recalctimings when 256+ mode Enhanced Mode is issued.
Added the MiroCRYSTAL 8S VLB card (805, SDAC).
Added the Phoenix S3 Vision968 (IBM RGB) and the MiroCRYSTAL 20SD VLB (864, SDAC) (alongside their BIOSes).
Added the vendor specific bits of CRTC5c used by the MiroVIDEO 40SV Ergo (968), Phoenix 868 and Phoenix 968.
Restored FIFO in the pre-964 cards, but without threading (Warning, code might be bloated for this).
Fixed horizontal issue with the SPEA Mercury P64V (968).
Overhauled the read portion of the PIX TRANS command (fixes white corruption in some instances while keeping everything already working fine).
Fixed Miro 10SD recalctimings issue about losing graphics mode.
DWORD mode SVGA CRTC bit fixed when S3 DWORD mode bit is enabled.
Reworked the pix tranfer register to allow a word in a byte transfer.
Added an alternative bios selection for the SPEA Mirage 801 card (3.05I and 4.01, the latter being the default now.
Added the MiroCrystal 10SD 805 VLB, Phoenix 801 ISA, MiroVideo 40SV 968 VLB/PCI, SPEA Mercury P64V 968 PCI , SPEA Mirage P64 Trio64 VLB cards.
Removed some non-working S3 cards like the Trio64V+ VLB and Elsa Winner 2000 Pro X VLB (only PCI variants of these cards are now in)
