Fixed some bugs regarding the Winbond W83877F Super I/O Chip and serial ports;
Added the President Award 430FX PCI machine, thank you ashenone for the BIOS.
The SMC FDC37C665 Super I/O chip's IDE handler now does nothing for the PC Paternet MB500N as well, fixes the problem of its BIOS not detecting hard disks;
DOSBox OPL volume changed from 55000 to 51000 per patch from James-F.
The SMC FDC37C665 Super I/O chip's IDE handler is now disabled for the Rise Computer R418 (the real board by passes that chip's IDE and uses the SiS 496B IDE controller so this is correct and not a hack), fixes hard disks disappearing on soft reset.
Fixed serial driver, re-worked API and updated other files accordingly.
Fixed serial mouse driver for new serial port, prepared for Mouse Systems mode.
Thoroughly clean up the code to vastly reduce the number of compiler warnings and found and fixed several bugs in the process;
Applied all mainline PCem commits;
Added SCSI hard disk emulation;
Commented out all unfinished machines and graphics cards;
Added the AOpen AP53 and ASUS P/I-P55T2 machines as well as another Tyan 440FX machine, all three with AMI WinBIOS (patch from TheCollector1995);
Added the Diamond Stealth 3D 3000 (S3 ViRGE/VX) graphics card (patch from TheCollector1995);
Added the PS/2 XT IDE (AccuLogic) HDD Controller (patch from TheCollector1995);
Added Microsoft/Logitech Bus Mouse emulation (patch from waltje);
Overhauled the makefiles (patch from waltje);
Added the Adaptec AHA-1542CF SCSI controller (patch from waltje);
Added preliminary (but still unfinished) Adaptec AHA-154x SCSI controller BIOS support (patch from waltje);
Added an ISABugger debugging device (patch from waltje);
Added sanity checks to the Direct3D code.
Floppy disk controller is now COMPLETELY reset on hard reset;
NukedOPL is now optional (but enabled by default) so people on older hardware can gain a few % of performance by going back to DOSBox OPL;
*.CPP files now get all the correct optimization flags applied;
Added NEC PowerMate V emulation - you can get into CMOS SETUP but it hangs before booting, and PCI graphics card don't work (yet).
Added experimental NVidia Riva TNT2 emulation (patch from MoochMcGee);
ASUS P/I-P54TP4XE, ASUS P/I-P55T2P4, and ASUS P/I-P55TVP4 are back;
National Semiconductor PC87306 Super I/O chip now correctly reenables devices after a chip power cycle;
Several FDC improvements and the behavior is now a bit closer to real hardware (based on actual tests);
Added MR Intel Advanced/ATX with Microid Research BIOS with support for 4 floppy drives and up to 4 IDE controllers;
Added floppy drives 3 and 4, bringing the maximum to 4;
You can now connect hard disks to the tertiary IDE controller;
Correct undocumented behavior of the LEA instruction with register is back on 286 and later CPU's;
Pentium-rea models with Intel chipsets now have port 92 (with alternate reset and alternate A20 toggle);
Overhauled DMA channel read and write routines and fixed cascading;
Improved IMG detection of a bad BPB (or complete lack of a BPB);
Added preliminary emulation of PS/2 1.44 MB and PC-98 1.25 MB 3-mode drives (both have an inverted DENSEL pin);
Removed the incorrect Amstrad mouse patch from TheCollector1995;
Fixed ATAPI CD-ROM disk change detection;
Windows IOCTL CD-ROM handler now tries to use direct SCSI passthrough for more things, including obtaining CD-ROM capacity;
The Diamond Stealth32 (ET4000/W32p) now also works correctly on the two Award SiS 496/497 boxes;
The (S)VGA handler now converts 6-bit RAMDAC RGB channels to standard 8-bit RGB using a lookup table generated at emulator start, calculated using the correct intensity conversion method and treating intensity 64 as equivalent to 63;
Moved a few options from the Configuration dialog box to the menu;
SIO, PIIX, and PIIX3 now have the reset control register on port CF9 as they should;
Several bugfixes.
Cleaned up floppy code a lot and reverted to single poller;
Fixed segment present bit and limit checking at read/write within segment;
The ASUS boards now have memregs too;
RTC code improved based on suggestion by Sarah Walker;
Fixed SVGA odd/even emulation and added chain odd/even support;
Removed non-existent CPU's.
