Previous CD-ROM sense is now correctly cleared when a REQUEST SENSE command is performed, fixes detection of disc change after setting the drive to empty first regardless of what bus is used for the CD-ROM.
ATAPI CD-ROM word reads no longer incorrectly discard the upper 16 bits, fixes the CD-ROM problems;
Significantly rewrote parts of the AHA-154x and BusLogic emulation, NT 3.1 RTM and MS-DOS drivers now works correctly;
The function in cdrom.c to read data blocks from the disc now correctly advances the position of the sector to read in non-passthrough mode, fixes multiblock reads from directly mounted ISO's;
Both ATAPI and SCSI now always check for Unit Attention and Not Ready on command execution.
- Crash dumps now attempt to be created in the directory with 86Box.exe
- Crash dumps now attempt to find the full path + filename of the module
where the crash occured, and includes it if found
SCSI LUN is now selectable for the CD-ROM drives;
Made sure every BusLogic RequestSetup ends in a StartMailbox sooner or later, fixes freezes with the DOS BusLogic drivers;
Commented out execess logging from mem.c;
Applied the mainline PCem commit that fixes the Bahamas64 on some boards.
Fixed several ATAPI CD-ROM bugs;
Added some missing CPL override checks to the MMU translate functions;
Tertiary and quaternary IDE controllers are now automatically disabled if not a single device is attached to them;
Changed sleep time on compile from 10 seconds to 2 seconds.
Fixed IDE and ATAPI 8-bit data reads and writes by rewriting the IDE and CD-ROM PIO data read and write code so that the base code is now 8-bit;
Added some compiler directives that if set, will enable togglable logging and log breakpoints;
Empty IDE channels now always report a status of 0x10 rather than 0x20, and do it on port 3F6h/376h/36Eh/3EEh too, fixes OAKCDROM.SYS infinite loop when hitting an empty IDE channel.
Four CD-ROM drives are now emulated;
ATAPI DMA is now emulated;
Unified CD-ROM pass through to host drive handling;
Applied all (applicable) mainline PCem commits.
I solved OPL3 problem on SB Pro V2, SB16, AWE32.
This was defined 388h-389h only, so plays like OPL2.
OPL3 will plays correctly if this defined 388h-38bh.
