Thoroughly clean up the code to vastly reduce the number of compiler warnings and found and fixed several bugs in the process;
Applied all mainline PCem commits;
Added SCSI hard disk emulation;
Commented out all unfinished machines and graphics cards;
Added the AOpen AP53 and ASUS P/I-P55T2 machines as well as another Tyan 440FX machine, all three with AMI WinBIOS (patch from TheCollector1995);
Added the Diamond Stealth 3D 3000 (S3 ViRGE/VX) graphics card (patch from TheCollector1995);
Added the PS/2 XT IDE (AccuLogic) HDD Controller (patch from TheCollector1995);
Added Microsoft/Logitech Bus Mouse emulation (patch from waltje);
Overhauled the makefiles (patch from waltje);
Added the Adaptec AHA-1542CF SCSI controller (patch from waltje);
Added preliminary (but still unfinished) Adaptec AHA-154x SCSI controller BIOS support (patch from waltje);
Added an ISABugger debugging device (patch from waltje);
Added sanity checks to the Direct3D code.
Added Intel Advanced/ZP;
Added Commodore PC 60 III;
Fixed Force 4:3 option when overscan is not enabled;
Added option to scale (0.5x, 1x, 1.5x, 2x) the video output;
Added ability to disable ATAPI DMA for CD-ROM drives;
Applied all mainline PCem commits;
Store network card in config file as name rather than number;
Fixed NVR storing for IBM PS/2 Models 2121 and 2121+ISA.
SCSI controller is now reset on x86 soft reset, fixes DOS driver hangs after soft reset;
SCSI controller reset control is now implemented more accurately, on a 50 ms timer;
For the PS/1 Model 2011, the Keyboard Input Port bit 6 now correctly reports if the currently selected (in FDC DOR) floppy drive is 3.5" or 5.25";
Commented out excess DMA logging;
Added support for FDF floppy images;
Fixed handling of CDB allocated length field for the CD-ROM INQUIRY command;
(S)VGA port 03C1 write is back again (it was incorrectly gone in some builds);
Commented out Compaq/Paradise VGA;
PS/1 Model 2121+ISA now correctly allows selecting graphics card.
Fixed DMA emulation, fixes Olivetti M24;
(S)VGA emulation for PS/1 and PS/2 machines now uses the old, less accurate sense switches, fixes display error on POST;
Bit 2 of the AT keyboard input port is now always held active, fixes PS/2 mouse on PS/1 and PS/2 machines;
Fixed mouse type selection on non-AT boards;
Fixed RAM type selection;
The entire palette is now overwritten when a monochrome monitor type is selected, fixes graphics mode on Hercules;
Applied updated SCAT emulation patch from PCem forum;
Nvidia Riva and S3 Virge IRQ is now configurable;
Properly applied the mainline PCem commit that fixed the Bahamas64 on the Intel AMI BIOS boards;
Commented out the Diamond Stealth 64 and the Miro Crystal S3 Vision 964 due to their non-working state;
Changed version to 1.06.
The CD-ROM IOCTL direct pass through code now does sanity check on the requested data size before passing the command - fixes crashes with some DMA-only host DVD drives;
The network poller is now in its own thread;
The hack is back in the emulation of the National Semiconductors PC87306 Super I/O Chip - it's the only way right now to have serial working on that board;
Fixed a part of the code that was still using NukedOPL even when OPL 3 was set to DOSBox OPL;
Applied all mainline PCem commits.
SCSI DMA writes (for MODE SELECT) now correctly use InitLength instead of request_length when bus type is SCSI;
Fixed MODE SELECT page saving;
CD Audio volume is now correctly initialized on card initialization for all Sound Blaster variants, fixes CD Audio being muted when booting without the Sound Blaster initialization program;
Brought the Sound Blaster variants back to a sane sound volume but still louder than the old quietness;
Moved SCSI adapter initialization to before sound card initialization, fixes DOS SCSI CD-ROM driver hangs under some conditions.
Fixed a link-breaking bug in cdrom.c;
The AHA-154x now supports commands 0x28 (GET EXTENDED BIOS INFO) and 0x29 (UNLOCK MAILBOX) and no longer reports a firmware revision with scatter/gather bug;
The BusLogic now supports command 0x20 (RESET);
Fixed the GPIO register mapping on the National Semiconductors PC87306 Super I/O chip.
Improved the BusLogic incoming mailbox code;
The BusLogic callback is now three-phases and outgoing mailbox interrupts are emulated correctly;
Fixed the CD-ROM command READ DISC INFORMATION (0x51), fixes NetBSD crashing 86Box with segmentation fault when using the AHA-154x;
Added the CD-ROM command PAUSE/RESUME ALT (0xC2).
Previous CD-ROM sense is now correctly cleared when a REQUEST SENSE command is performed, fixes detection of disc change after setting the drive to empty first regardless of what bus is used for the CD-ROM.
ATAPI CD-ROM word reads no longer incorrectly discard the upper 16 bits, fixes the CD-ROM problems;
Significantly rewrote parts of the AHA-154x and BusLogic emulation, NT 3.1 RTM and MS-DOS drivers now works correctly;
The function in cdrom.c to read data blocks from the disc now correctly advances the position of the sector to read in non-passthrough mode, fixes multiblock reads from directly mounted ISO's;
Both ATAPI and SCSI now always check for Unit Attention and Not Ready on command execution.
SCSI LUN is now selectable for the CD-ROM drives;
Made sure every BusLogic RequestSetup ends in a StartMailbox sooner or later, fixes freezes with the DOS BusLogic drivers;
Commented out execess logging from mem.c;
Applied the mainline PCem commit that fixes the Bahamas64 on some boards.
Fixed several ATAPI CD-ROM bugs;
Added some missing CPL override checks to the MMU translate functions;
Tertiary and quaternary IDE controllers are now automatically disabled if not a single device is attached to them;
Changed sleep time on compile from 10 seconds to 2 seconds.
Fixed IDE and ATAPI 8-bit data reads and writes by rewriting the IDE and CD-ROM PIO data read and write code so that the base code is now 8-bit;
Added some compiler directives that if set, will enable togglable logging and log breakpoints;
Empty IDE channels now always report a status of 0x10 rather than 0x20, and do it on port 3F6h/376h/36Eh/3EEh too, fixes OAKCDROM.SYS infinite loop when hitting an empty IDE channel.
Four CD-ROM drives are now emulated;
ATAPI DMA is now emulated;
Unified CD-ROM pass through to host drive handling;
Applied all (applicable) mainline PCem commits.
