The IBM PS/2 Model 486 now uses its own rom set ID;
The AHA-154x and Buslogic SCSI controllers no longer stop scanning for mailboxes when in aggressive round robin mode;
PIC interrupt processing fixes - no more IRQ-caused triple faults in Windows 98 SE.
Ported the Roland MT-32 emulation (using MUNT) from bit's MT32 emulation branch of PCem;
Sanitized the OpenAL give buffer code in openal.c a bit;
NVR path is now specifiable in the Settings dialog;
Added Logitech 3-button serial mouse per protocol description by waltje;
The RTL8029AS and the BT-958D now actually use the PCI IRQ routing;
Fixed BT-958D PCI device initialization on the bus;
PCI IRQ routing now respects the edge/level setting set on ports 4D0/4D1.
Fixed some bugs regarding the Winbond W83877F Super I/O Chip and serial ports;
Added the President Award 430FX PCI machine, thank you ashenone for the BIOS.
Re-introduced the Acer V35n machine, but with a proper bios (r01-c0.bin instead of the service one).
MCA serial and parallel initialization fixes alongside the ISA PS/1 and PS/2 Model 30 ones.
Fixed all the reported bugs regarding the Settings dialog;
MIDI out device is now no longer reset to 0 after hard reset;
Removed all vestiges of the old disk activity flash;
The configuration file is no longer saved when it shouldn't be;
Redone the status bar icon updating so it is only done in win.c;
Made sure all variables in ibm.h are extern;
A lot of other bugfixes;
Added Mouse Systems Mouse emulation (patch from TheCollector1995);
Added IBM PS/1 Model 2133 (486) emulation (patch from TheCollector1995);
Tweaked the CPU dynamic recompiler cycle periods - 486SX 33 and 486DX 33 now work;
Increased compatibility with configuration files from before the previous commit.
Thoroughly clean up the code to vastly reduce the number of compiler warnings and found and fixed several bugs in the process;
Applied all mainline PCem commits;
Added SCSI hard disk emulation;
Commented out all unfinished machines and graphics cards;
Added the AOpen AP53 and ASUS P/I-P55T2 machines as well as another Tyan 440FX machine, all three with AMI WinBIOS (patch from TheCollector1995);
Added the Diamond Stealth 3D 3000 (S3 ViRGE/VX) graphics card (patch from TheCollector1995);
Added the PS/2 XT IDE (AccuLogic) HDD Controller (patch from TheCollector1995);
Added Microsoft/Logitech Bus Mouse emulation (patch from waltje);
Overhauled the makefiles (patch from waltje);
Added the Adaptec AHA-1542CF SCSI controller (patch from waltje);
Added preliminary (but still unfinished) Adaptec AHA-154x SCSI controller BIOS support (patch from waltje);
Added an ISABugger debugging device (patch from waltje);
Added sanity checks to the Direct3D code.
Added Intel Advanced/ZP;
Added Commodore PC 60 III;
Fixed Force 4:3 option when overscan is not enabled;
Added option to scale (0.5x, 1x, 1.5x, 2x) the video output;
Added ability to disable ATAPI DMA for CD-ROM drives;
Applied all mainline PCem commits;
Store network card in config file as name rather than number;
Fixed NVR storing for IBM PS/2 Models 2121 and 2121+ISA.
Fixed DMA emulation, fixes Olivetti M24;
(S)VGA emulation for PS/1 and PS/2 machines now uses the old, less accurate sense switches, fixes display error on POST;
Bit 2 of the AT keyboard input port is now always held active, fixes PS/2 mouse on PS/1 and PS/2 machines;
Fixed mouse type selection on non-AT boards;
Fixed RAM type selection;
The entire palette is now overwritten when a monochrome monitor type is selected, fixes graphics mode on Hercules;
Applied updated SCAT emulation patch from PCem forum;
Nvidia Riva and S3 Virge IRQ is now configurable;
Properly applied the mainline PCem commit that fixed the Bahamas64 on the Intel AMI BIOS boards;
Commented out the Diamond Stealth 64 and the Miro Crystal S3 Vision 964 due to their non-working state;
Changed version to 1.06.
IMG floppy image handler now fills the remaining bytes with 0xF6 if it has read less bytes than expected - fixes handling of truncated IMG's with a valid BPB;
HDI files are now written with the correct header;
FDC DUMP REGISTERS command is now implemented correctly, fixes FDC error on AMI 486 clone and AMI WinBIOS 486;
Commented out the Acer 386SX and the Phoenix 386 clone;
WinPCap code is now delayed loading (thanks to Rai-chan), the emulator should now be able to run without WinPCap installed if not using PCap;
The IBM PS/2 Model 30 NVR file is now saved in the same directly as the other NVR files;
Applied all the latest mainline PCem Voodoo commits.
Fixed the emulation of the Intel 82335 chip used by the Phoenix 386 clone;
Fixed a bug regarding the CGA RGB monitor type;
The IBM PS/1 Model 2121 with ISA is now acknowledged in mem.c.
Added IBM PS/2 Model 30 emulation per mainline PCem patch from dns2kv2;
Commented out the Chips & Technologies VGA 451 as it needs further work;
Added the ability to disable XTIDE;
Prepared the icon that will be used for stable builds.
Added the Samsung SPC-4200P;
Added the Chips & Technologies VGA 451;
Applied all mainline PCem commits;
Added Amstrad MegaPC 386DX model (exits per documentation that I have in German).
Floppy disk controller is now COMPLETELY reset on hard reset;
NukedOPL is now optional (but enabled by default) so people on older hardware can gain a few % of performance by going back to DOSBox OPL;
*.CPP files now get all the correct optimization flags applied;
Added NEC PowerMate V emulation - you can get into CMOS SETUP but it hangs before booting, and PCI graphics card don't work (yet).
SCSI LUN is now selectable for the CD-ROM drives;
Made sure every BusLogic RequestSetup ends in a StartMailbox sooner or later, fixes freezes with the DOS BusLogic drivers;
Commented out execess logging from mem.c;
Applied the mainline PCem commit that fixes the Bahamas64 on some boards.
Fixed several ATAPI CD-ROM bugs;
Added some missing CPL override checks to the MMU translate functions;
Tertiary and quaternary IDE controllers are now automatically disabled if not a single device is attached to them;
Changed sleep time on compile from 10 seconds to 2 seconds.
The port 92 handler in mem.c now flushes MMU cache when toggling the A20 gate;
Added ability to reload previous disc after ejecting it;
Fixed the START/STOP UNIT command for both SCSI and ATAPI;
Applied mainline PCem commit: All XT models can now use 64kb RAM. Patch from ecksemmess .
Added experimental NVidia Riva TNT2 emulation (patch from MoochMcGee);
ASUS P/I-P54TP4XE, ASUS P/I-P55T2P4, and ASUS P/I-P55TVP4 are back;
National Semiconductor PC87306 Super I/O chip now correctly reenables devices after a chip power cycle;
Several FDC improvements and the behavior is now a bit closer to real hardware (based on actual tests);
Added MR Intel Advanced/ATX with Microid Research BIOS with support for 4 floppy drives and up to 4 IDE controllers;
Added floppy drives 3 and 4, bringing the maximum to 4;
You can now connect hard disks to the tertiary IDE controller;
Correct undocumented behavior of the LEA instruction with register is back on 286 and later CPU's;
Pentium-rea models with Intel chipsets now have port 92 (with alternate reset and alternate A20 toggle);
Overhauled DMA channel read and write routines and fixed cascading;
Improved IMG detection of a bad BPB (or complete lack of a BPB);
Added preliminary emulation of PS/2 1.44 MB and PC-98 1.25 MB 3-mode drives (both have an inverted DENSEL pin);
Removed the incorrect Amstrad mouse patch from TheCollector1995;
Fixed ATAPI CD-ROM disk change detection;
Windows IOCTL CD-ROM handler now tries to use direct SCSI passthrough for more things, including obtaining CD-ROM capacity;
The Diamond Stealth32 (ET4000/W32p) now also works correctly on the two Award SiS 496/497 boxes;
The (S)VGA handler now converts 6-bit RAMDAC RGB channels to standard 8-bit RGB using a lookup table generated at emulator start, calculated using the correct intensity conversion method and treating intensity 64 as equivalent to 63;
Moved a few options from the Configuration dialog box to the menu;
SIO, PIIX, and PIIX3 now have the reset control register on port CF9 as they should;
Several bugfixes.
Sound Blaster 16 and AWE32 IRQ, base address, and DMA configuration is back;
The Intel Advanced/ATX now requires version 1.00.06 of the BIOS rather than 1.00.05.
FDI stream images are now also handled by the 86F handler;
Both floppy drives' motors now spin separately;
Added Plantronics ColorPlus emulation per patch from PCem forum;
Applied all mainline PCem commits;
Fixed several bugs.
