1. Cirrus Logic GD54xx, Paradise/WD VGA now reset the interlace once a text mode is issued if not done automatically.
2. Paradise/WD's 15/16bpp modes using the 800x600 resolution now have the correct ma_latch, should fix most operating systems drivers using this combo.
3. More fixes (hopefully) to the accelerated pitch and rowoffset of the Trident TGUI cards (9440AGi and 96x0XGi), should fix issues with delayed displays mode changes under various operating systems (e.g.: Win3.1x).
4. Preliminary implementation of the Area Fill command of XGA, which is issued while using various painting and/or calc utilities on Win3.1x (IBM XGA updated drivers, e.g.: 2.12).
5. Preliminary (and incomplete) 4bpp XGA mode.
6. The XGA memory test for the 0xa5 using writes (used by various operating systems) no longer conflicts with DOS' XGAKIT's memory detection.
7. Small ROP fixes to both XGA and 8514/A.
8. Re-organized the mapping of the Mach32 chipset, especially when to enable the ATI mode or switching back to IBM mode, should fix LFB conflicts with various operating systems.
9. According to The OS/2 Museum, the Adaptec AHA-154xB series of SCSI cards fail the ASPI4DOS.SYS 3.36 signature check, so now make the changes accordingly.
10. Remove useless and crashy bios-less option of the Trantor T128.
11. The Image Manager 1024 card can also be used on a XT (although only if it has a V20/V30).
12. Re-organized the IBM PS/2 model 60 initialization as well as its right POS machine ID (though an update to sc.exe is still required for the POST memory amount to work normally).
1. Changed the p's back to priv's.
2. Made the Spock/Tribble cards use picint instead of picintlevel.
3. Corrected fallthroughs and a minor change in the SCSI CD-ROM code core.
1. Added the Tribble 16-bit IBM SCSI adapter.
2. Reworked the vendor unique commands to counter audio issues as well as adding some undocumented commands (thanks to the source code of xmcd!), plus replacing the NEC CD-ROM DRIVE:75 with the :38 one.
* separate (ibm8514|xga)_enabled into (ibm8514|xga)_standalone_enabled
and (ibm8514|xga)_active, the former being enabled only for standalone
8514/A or XGA cards, the latter for all 8514/A and XGA-capable cards
and not saved into the config file;
* remove (ibm8514|xga)_has_vga and replace all uses of it with
(ibm8514|xga)_standalone_enabled;
* Qt UI: the checkboxes for standalone 8514/A and XGA are now correctly
grayed out if an (S)VGA card with 8514/A or XGA capability is selected,
including cases when the card is an internal/onboard one; said cards are
now no longer appear as SVGA multi-monitor compatible.
1. Hopefully fixed the passthrough stuff for good and fixed typo's in the IBM 8514/A poll function about the cursor.
2. Eliminated the ibm8514_on global variable in favor of a struct variable to be consistent with XGA.
