1. Second attempt to fix the banking in the Cirrus (sigh, why doesn't banking get nulled automatically...)
2. Introduce a new timer to the 8514/A side so it won't slow the VGA clock down it was shared before.
1. Cleanups and moving the mach8/32 struct to a dedicated header so that would allow for future 8514/A add-on clones (in paper).
2. Mach8/32's port 0x4ae8/9 and shadow set ports (0x5aee and 0x46ee) now account to the mode changes seriously, should fix most of the horizontal/vertical coordinates while entering GUI modes of various stuff.
3. Horizontal/Vertical window coordinates can only be modified if the display enable bit of port 0x22e8 is set as well as bit 0 of port 0x4aee, fixes most problems noted above.
4. Implemented horizontal blanking stuff a la VGA but actually for 8514/A and clones (like ATI).
5. Added some comments regarding the current situation.
6. The Mach8 was actually a 8514/A clone co-processor, not a single solution card of its own. The ATI Graphics Ultra was a single solution card that is actually a Mach8 + ATI 28800-6 in one, so renaming it accordingly.
7. Fixed garbled/distorted acceleration when device bitmap acceleration is enabled in the ATI Mach8 3.0 Win3.1 drivers.
1. Made the 4 color mode (67h) work properly now, including its 4 schemes on all ATI cards that support said mode.
2. Shadow set now has a true purpose for 8514/A compatibility on ATI Mach8/32.
3. Non-ATI 8514/A used to not work before because of the dev->local variable was not being set to 0 in the ibm8514_init() function, now it's fixed.
1. Hopefully fixed the passthrough stuff for good and fixed typo's in the IBM 8514/A poll function about the cursor.
2. Eliminated the ibm8514_on global variable in favor of a struct variable to be consistent with XGA.
1. The passthrough from VGA to 8514/A and/or 8514/A to VGA no longer relies on hackish places where to switch from/to, instead, relying on port 0x3c3 of VGA doing so (though the Mach8/32 still needs some places where to manually switch from/to, mainly the MCA one when configuring the EEPROM).
2. Implemented the MCA behalf of the Mach32 and its corresponding reset function.
3. Properly implemented (more or less) true color, including 24-bit BGR rendering
4. Other fixes such as color patterns and mono patterns being more correct than before in various operating systems and in 24-bit true color.
5. Implemented the onboard Mach32 video of the IBM PS/ValuePoint P60 machine.
6. Made the onboard internal video detect when it's 8514/A compatible or not (CGA/EGA/MDA/VGA/etc.). If the former is selected, then the video monitor flag is used instead (for QT).
7. The TGUI9400 and 9440, if on VLB, now detect the right amount of memory if on 2MB.
8. Initial implementation of the ATI 68875 ramdac used by the Mach32 and made the ATI 68860 8514/A aware when selected with the Mach32AX PCI.
9. Separated the 8514/A ramdac ports from the VGA ramdac ports, allowing seamless transition from/to 8514/A/VGA.
10. Fixed a hdisp problem in the ET4000/W32 cards, where it was doubling the horizontal display in 15bpp+ graphics mode.
11. Removed the 0x3da/0x3ba port hack that was on the Mach8/32 code, relying on the (S)VGA core instead.
12. Reworked and simplified the TGUI9440 pitch register based on logging due to no documentation at all.
Added the Mach8 and Mach32 ISA/VLB/PCI cards (initial implementation and MCA coming soon for the Mach32) and their corresponding EEPROM's.
Added INMOS XGA ISA card and updated the SVGA core to reflect its mapping as well as the Mach8/32 mapping when in 8514 monitor mode.
Mark the XGA button as already checked and locked when a standalone XGA BIOS card is present like the INMOS one. (QT only)
Same concept as above, but applies to the Mach8 and 32 for the 8514 option as well. (QT only)
XGA: Fix crash when (S)VGA cards not selected as the primary display (e.g.: EGA, CGA. etc).
Better handling of the VGA on/off passthrough (vga_on variable).
MCA side: to avoid lfb issues, bit 0 of POS4 will be always enabled regardless of the ram size (most software uses the >16MB memory method).
Better handling of the BIOS ROM mapping and Memory Mapped I/O during the MCA PS/2 POST and resets, fixes 40 25 hang (once and for all).
Re-organized the ROM loading in ISA mode.
Added the AT&T 2xc498 Precision RAMDAC.
Added 1MB configurations to the Cirrus Logic GD5434 as well as re-organized the memory size options of the other Cirrus cards.
Separated the et4000w32/i blitter from the standard et4000w32p blitter and properly implemented the X/Y Count route.
Added several Diamond Cirrus cards.
Added Number Nine S3 cards (868 and 968-based).
Fixed the WD90c30 1MB modes.
Re-organized the video card names.
Improved the banking of the ATI 28800-5 cards (VGA Charger and VGA Wonder XL).
Improved the skew and horizontal display of some of the ET4000W32P cards as well as the cursor.
Made the Oak OTI 077 and PVGA WD90c30 cards use the Sierra 11487 (actually a clone is used in the real cards).
For the WD90c30, changed the way the hack is involved.
Reverted some changes of the S3 Vision/Trio that originally made glitches, now the glitches are gone and the accelerator renders fine.
Re-organized the Sierra 1148x RAMDAC's and added the 11486 (Mark 1).
MCA SVGA cards use the full 32-bit mapping.
Reworked the pix tranfer register to allow a word in a byte transfer.
Added an alternative bios selection for the SPEA Mirage 801 card (3.05I and 4.01, the latter being the default now.
Added the MiroCrystal 10SD 805 VLB, Phoenix 801 ISA, MiroVideo 40SV 968 VLB/PCI, SPEA Mercury P64V 968 PCI , SPEA Mirage P64 Trio64 VLB cards.
Removed some non-working S3 cards like the Trio64V+ VLB and Elsa Winner 2000 Pro X VLB (only PCI variants of these cards are now in)
