Applied all mainline PCem commits;
CD-ROM sound thread is now disabled if all CD-ROM drives are either disabled or have audio disabled;
Fixed the displayed incorrect zero cylinders, head, and sectors per cylinder when loading an already existing HDI image;
Fixed the CD-ROM audio menu item not checking/unchecking correctly.
Floppy disk controller is now COMPLETELY reset on hard reset;
NukedOPL is now optional (but enabled by default) so people on older hardware can gain a few % of performance by going back to DOSBox OPL;
*.CPP files now get all the correct optimization flags applied;
Added NEC PowerMate V emulation - you can get into CMOS SETUP but it hangs before booting, and PCI graphics card don't work (yet).
Improved the BusLogic incoming mailbox code;
The BusLogic callback is now three-phases and outgoing mailbox interrupts are emulated correctly;
Fixed the CD-ROM command READ DISC INFORMATION (0x51), fixes NetBSD crashing 86Box with segmentation fault when using the AHA-154x;
Added the CD-ROM command PAUSE/RESUME ALT (0xC2).
SCSI LUN is now selectable for the CD-ROM drives;
Made sure every BusLogic RequestSetup ends in a StartMailbox sooner or later, fixes freezes with the DOS BusLogic drivers;
Commented out execess logging from mem.c;
Applied the mainline PCem commit that fixes the Bahamas64 on some boards.
Four CD-ROM drives are now emulated;
ATAPI DMA is now emulated;
Unified CD-ROM pass through to host drive handling;
Applied all (applicable) mainline PCem commits.
The tertiary and quaternary IDE controllers are now fully configurable;
The IRQ of the RTL8029AS network card is now configurable;
CopyQM floppy images are now supported.
Moved CD-ROM read data buffer declaration and definitions to SCSI source files and headers, but still applying to IDE when needed.
SCSI Read commands now return the correct sectors on callback.
DMA bug fixes.
Added experimental NVidia Riva TNT2 emulation (patch from MoochMcGee);
ASUS P/I-P54TP4XE, ASUS P/I-P55T2P4, and ASUS P/I-P55TVP4 are back;
National Semiconductor PC87306 Super I/O chip now correctly reenables devices after a chip power cycle;
Several FDC improvements and the behavior is now a bit closer to real hardware (based on actual tests);
Added MR Intel Advanced/ATX with Microid Research BIOS with support for 4 floppy drives and up to 4 IDE controllers;
Added floppy drives 3 and 4, bringing the maximum to 4;
You can now connect hard disks to the tertiary IDE controller;
Correct undocumented behavior of the LEA instruction with register is back on 286 and later CPU's;
Pentium-rea models with Intel chipsets now have port 92 (with alternate reset and alternate A20 toggle);
Overhauled DMA channel read and write routines and fixed cascading;
Improved IMG detection of a bad BPB (or complete lack of a BPB);
Added preliminary emulation of PS/2 1.44 MB and PC-98 1.25 MB 3-mode drives (both have an inverted DENSEL pin);
Removed the incorrect Amstrad mouse patch from TheCollector1995;
Fixed ATAPI CD-ROM disk change detection;
Windows IOCTL CD-ROM handler now tries to use direct SCSI passthrough for more things, including obtaining CD-ROM capacity;
The Diamond Stealth32 (ET4000/W32p) now also works correctly on the two Award SiS 496/497 boxes;
The (S)VGA handler now converts 6-bit RAMDAC RGB channels to standard 8-bit RGB using a lookup table generated at emulator start, calculated using the correct intensity conversion method and treating intensity 64 as equivalent to 63;
Moved a few options from the Configuration dialog box to the menu;
SIO, PIIX, and PIIX3 now have the reset control register on port CF9 as they should;
Several bugfixes.
Removed the lone Misc menu and mvoed Status to Settings;
Added a SCSI CD-ROM option to the menu;
Removed the atapi_cdrom_enabled option and replaced any usage of it with !scsi_cdrom_enabled;
Disabling/enabling the CD-ROM drive is now separate from the drive's contents;
The tertiary IDE controller now never gets enabled is the CD-ROM drive is either disabled or SCSI.
FDI stream images are now also handled by the 86F handler;
Both floppy drives' motors now spin separately;
Added Plantronics ColorPlus emulation per patch from PCem forum;
Applied all mainline PCem commits;
Fixed several bugs.
Improved TeleDisk support;
Added support for ImageDisk (IMD) images;
Added MSR registers 186 and 570 for the Intel i686 CPU's;
Applied both mainline PCem commits.
FDC SEEK command now no longer incorrectly times out when seeking to the track the FDC thinks it's already at, fixes floppies in NT 3.1;
Emulator now correctly saves configuration changes to the configuration files it was loaded with rather than always the default;
Default path for NVR's can now be overridden by adding the nvr_path option to the cfg file.
Replaced IMG handler with one that now proxies to the 86F handler;
Applies the remaining Mainline PCem speedup commit;
Fixed the National Semiconductors PC87306 Super I/O Chip's serial port IRQ assignment;
DMF images are now loaded with the correct sector interleave, improving read/write speed;
XDF images are now loaded in a way that emulates the real order of the sectors on the track, improving read/write speed;
Added 16-bit physical memory read/write routines (mem_phys_readw, mem_phys_writew) and modified the 16-bit DMA code to use them instead of two 8-bit reads/writes.
Fixed 3.5" 2ED XDF structure;
Applied mainline PCem big recompiler speedup (up to 20% seen) commit;
Added support for floppy drive swapping with the Winbond W3877F Super I/O chip.
Fixed ET4000/W32p clock (for non-Diamond variants) and banking extension;
Brought the code on par with the mainline;
Fixed names of the two Cardex ET4000/W32p variants per the BIOS'es;
Brought ET4000AX unknown RAMDAC back in line with the mainline (reverted bogus "fix" by Win9xFan);
Made 15bpp and 16bpp colors more accurate.
Cleaned up floppy code a lot and reverted to single poller;
Fixed segment present bit and limit checking at read/write within segment;
The ASUS boards now have memregs too;
RTC code improved based on suggestion by Sarah Walker;
Fixed SVGA odd/even emulation and added chain odd/even support;
Removed non-existent CPU's.
Uncommented auto-setting FDC data rate to 250 kbps on non-AT machines; fixes floppies on IBM PC and XT and clones;
Removed flto flag from the makefiles, should speed up compile times and make the XT and earlier machines work again;
Removed CGA brown and color burst settings in line with mainline PCem.
