The tertiary and quaternary IDE controllers are now fully configurable;
The IRQ of the RTL8029AS network card is now configurable;
CopyQM floppy images are now supported.
Moved CD-ROM read data buffer declaration and definitions to SCSI source files and headers, but still applying to IDE when needed.
SCSI Read commands now return the correct sectors on callback.
DMA bug fixes.
Added experimental NVidia Riva TNT2 emulation (patch from MoochMcGee);
ASUS P/I-P54TP4XE, ASUS P/I-P55T2P4, and ASUS P/I-P55TVP4 are back;
National Semiconductor PC87306 Super I/O chip now correctly reenables devices after a chip power cycle;
Several FDC improvements and the behavior is now a bit closer to real hardware (based on actual tests);
Added MR Intel Advanced/ATX with Microid Research BIOS with support for 4 floppy drives and up to 4 IDE controllers;
Added floppy drives 3 and 4, bringing the maximum to 4;
You can now connect hard disks to the tertiary IDE controller;
Correct undocumented behavior of the LEA instruction with register is back on 286 and later CPU's;
Pentium-rea models with Intel chipsets now have port 92 (with alternate reset and alternate A20 toggle);
Overhauled DMA channel read and write routines and fixed cascading;
Improved IMG detection of a bad BPB (or complete lack of a BPB);
Added preliminary emulation of PS/2 1.44 MB and PC-98 1.25 MB 3-mode drives (both have an inverted DENSEL pin);
Removed the incorrect Amstrad mouse patch from TheCollector1995;
Fixed ATAPI CD-ROM disk change detection;
Windows IOCTL CD-ROM handler now tries to use direct SCSI passthrough for more things, including obtaining CD-ROM capacity;
The Diamond Stealth32 (ET4000/W32p) now also works correctly on the two Award SiS 496/497 boxes;
The (S)VGA handler now converts 6-bit RAMDAC RGB channels to standard 8-bit RGB using a lookup table generated at emulator start, calculated using the correct intensity conversion method and treating intensity 64 as equivalent to 63;
Moved a few options from the Configuration dialog box to the menu;
SIO, PIIX, and PIIX3 now have the reset control register on port CF9 as they should;
Several bugfixes.
The AHA-154x can now also use base addresses 0x130, 0x134, 0x230, 0x234, and IRQ's 14 and 15;
Reworked the SCSI system resource menu handlers in win.c a bit.
Removed the lone Misc menu and mvoed Status to Settings;
Added a SCSI CD-ROM option to the menu;
Removed the atapi_cdrom_enabled option and replaced any usage of it with !scsi_cdrom_enabled;
Disabling/enabling the CD-ROM drive is now separate from the drive's contents;
The tertiary IDE controller now never gets enabled is the CD-ROM drive is either disabled or SCSI.
Improved TeleDisk support;
Added support for ImageDisk (IMD) images;
Added MSR registers 186 and 570 for the Intel i686 CPU's;
Applied both mainline PCem commits.
Replaced IMG handler with one that now proxies to the 86F handler;
Applies the remaining Mainline PCem speedup commit;
Fixed the National Semiconductors PC87306 Super I/O Chip's serial port IRQ assignment;
DMF images are now loaded with the correct sector interleave, improving read/write speed;
XDF images are now loaded in a way that emulates the real order of the sectors on the track, improving read/write speed;
Added 16-bit physical memory read/write routines (mem_phys_readw, mem_phys_writew) and modified the 16-bit DMA code to use them instead of two 8-bit reads/writes.
Fixed behavior of the FDC RECALIBRATE command for FDC's on certain Super I/O chips;
Several 86F-related fixes;
Added the Intel Advanced/ML (430HX, Socket 7, currently with non-working Flash) and Intel Advanced/ATX (430FX, Socket 7, works perfectly) motherboards;
Fixed handling of DENSEL when the FDC is in National Semiconductors PC87306 mode;
Brought 440FX initialization PCI parameters in line with Bochs;
Brought PIIX3 initialization PCI parameters in line with QEMU.
