Fixed CD-ROM sector reading from CUE/BIN images with 2048-byte sectors;
Fixed existing CD-ROM Mode 2 support and adding support for the remaining variants of Mode 2;
The Windows CD-ROM IOCTL code now correctly determines the track type, fixes CD Audio over IOCTL;
Applied all PCem sound-related commits;
Sound Blaster 16/AWE32 mixer effects now also apply to CD Audio when the Sound Blaster 16 or AWE32 is selected.
Fixed the MODE SELECT (6) command for CD-ROM and SCSI disk;
Implemented REQUEST SENSE with DESC bit set for SCSI disk;
Implemented the SCSI RESERVE, SCSI RELEASE, and SEND DIAGNOSTIC commands for SCSI disk.
Merged floppy.c and fdd.c and renamed floppy_*.c (the floppy image format handlers) to fdd_*.c;
Reading the AT or PS/2 keyboard controller status no longer clears the transmit timeout bit, fixes error 8601 (mouse error) on the IBM PS/2 Model 80;
MMU translate and DMA physical reads and writes now go through _mem_exec instead of directly to ram[], should fix the last remaining problems with remapped mappings;
Implemented the Sound gain dialog;
Added the resource for the "New floppy image" dialog and the needed functions for the functionality of exporting the currently mounted floppy image as 86F, both of which should be finished in the next commit;
Applied the CD-ROM fixes from the PCem commit;
Added the "Keep ratio" option for full screen stretch.
Fixed Sound Blaster 16 and earlier CD-ROM volume registers (and made them no longer default to 0);
Serial mouse now resets the FIFO before sending the ID, fixes mouse detection after clipping and moving the mouse;
Rewritten CD-ROM and SCSI disk Mode Select handling and changed things regarding Mode Sense as well, also fixes emulator segmentation faults when anything attempts to do a Mode Select;
Fixed the Microsoft InPort mouse emulation (used the Bochs code as reference for the polling/state update code), now it actually moves;
The PCjr initialization now sets the XT scan code table, makes the keyboard actually work on the PCjr again;
Several bugfixes regarding the Read CD commands, fixes CD Audio in digital mode on Windows ME;
Finally properly fixed the regular CD Audio MSF/LBA conversion mess;
Applied all applicable PCem commits.
Fixed the behavior of the CD-ROM GET CONFIGURATION command when unimplemented features are requested;
Fixed the behavior of the CD-ROM READ DVD STRUCTURE command in some situations and made it correctly report 05/30/02 for incompatible format;
Reworked the PS/2 Model 80 Type 2 memory handling a bit;
The emulator now allocates the few MB of space needed for pages for the entire 4 GB RAM space at the startup and only memset's it to 0 on hard reset - should make sure DMA page reads from/writes to memory-mapped devices no longer crash the emulator on invalidating the memory range;
Applied app applicable PCem patches;
The PS/1 Model 2133 now also applies PS/2-style NMI mask handling - fixes the 486 recompiler on this machine;
Added the missing #include of "cpu/cpu.h" in io.c, fixes compiling when I/O tracing is enabled.
IBM.H is gone, video stuff re-organized. Keyboard stuff reorganized.
Machines that have their own video, mouse and/or keyboard now have all this in their machine file.
Fixed and other cleanups here and there.
Fixed the IDE device detection hang with > 8 GB hard disks;
Rewritten the SMC FDC37C932FR Super I/O chip emulation;
Added an early implementation of the PIIX4, currently not in the makefile because nothing uses it right now.
Changed the CD-ROM capabilities MODE SENSE page a bit;
Applied the S3 Trio and SVGA changes from PCem;
Fixed saving of the video renderer settings;
Fixed DirectDraw full screen;
Fixed crashes on soft reset in full screen.
Fixed the last remaining ATAPI DMA bugs;
Fixed IDE hard disk DMA;
Fixed PIIX bus master DMA read and write;
The Settings dialog now accepts more than 16 heads for IDE hard disks;
Added the IDE READ DMA ALT and WRITE DMA ALT commands;
Reenabled current CHS translation reporting, with bugfixes, hopefully the bugfixes will prevent certain larger hard disks from being detected as 250 MB.
Fixed (hopefully) pass through in the Windows CD-ROM IOCtl code;
Fixed the legacy I/O address handling on the BT-958D, now it behaves correctly - legacy I/O address disabled by default, can be enabled in AutoSCSI (removed the setting from the device config struct);
The BT-958D PCI-configured I/O space now correctly gets 32 ports and not 4.
Fixed MCA write bugs for the AHA-1640 and BT-640;
Fixed a warning in the PC87306 Super I/O chip emulation;
Each renderer now only has a 32-bit blitter - video_blit_memtoscreen_8() now only converts buffer to buffer32 and then calls video_blit_memtoscreen(), 8-bit blitters are now gone.
The CD-ROM buffer is now dynamically malloc'd;
Did a lot of bugfixing in cdrom.c and scsi_disk.c, Debian 8's modprobe aha1542 and the NT 3.10.404.1 Trantor 310b driver now work;
Fixed the IDE IRQ/MIRQ mess and ATAPI DMA transfer length;
Fixed the operation of mmutranslate() a bit;
Commented out several instances of excess logging;
Applied the mainline PCem commit prefetch commit;
Readded missing Sound Blaster DSP MIDI behavior and gave it the correct MPU struct;
All non-IBM 486 machines now correctly have the VLB flag set.
The CD-ROM and SCSI disk REQUEST SENSE commands no longer incorrectly set the phase to status;
REQUEST SENSE with non-data direction control byte is now treated as a request to send sense bytes from the command directly to the sense buffer;
SCSI and SLiRP threads now terminate themselves again when out of the while loop;
SCSI and SLiRP mutexes are now closed when the threads terminate themselves;
Fixed a bug causing the "Press F12+F8 or middle mouse button to release" string on the title bar to get corrupt.
Fixed AHA-154x scatter/gather transfers;
Two-phased SCSI read-direction commands;
Made scsi_bus.c use a dynamically malloc'd buffer instead of a giant fixed-size buffer;
The AHA-154x/BusLogic thread now uses mutexes;
The BusLogic BT-545C is now the BT-545S;
Added the BusLogic BT-542BH;
The AHA-1542CF now again uses the v2.11 BIOS as the CD booting now works;
Applied PCem commit that adds NMI support to the recompiler;
Applied PCem commit that adds the IBM XT 286;
Applied PCem commits that have to do with sound, including the ES1371;
Fixed the NCR5380 output data register;
Moved the SLiRP mutex stuff from win.c to the appropriate network files;
Added sanity checks to everything in win_thread.c.
Cleaned up the handlers for the BusLogic Execute SCSI Command command;
Made the AHA-1542CF use version 2.01 of the BIOS;
The CD-ROM GET EVENT STATUS NOTIFICATION fix is back.
Two-phases SCSI disk write direction commands (needed for the NCR5380);
Renamed cdrom_ioctl.c/h to win_cdrom_ioctl.c/h and moved them to win/;
Moved some CD-ROM and floppy initialization blocks to the appropriate files.
