Thoroughly clean up the code to vastly reduce the number of compiler warnings and found and fixed several bugs in the process;
Applied all mainline PCem commits;
Added SCSI hard disk emulation;
Commented out all unfinished machines and graphics cards;
Added the AOpen AP53 and ASUS P/I-P55T2 machines as well as another Tyan 440FX machine, all three with AMI WinBIOS (patch from TheCollector1995);
Added the Diamond Stealth 3D 3000 (S3 ViRGE/VX) graphics card (patch from TheCollector1995);
Added the PS/2 XT IDE (AccuLogic) HDD Controller (patch from TheCollector1995);
Added Microsoft/Logitech Bus Mouse emulation (patch from waltje);
Overhauled the makefiles (patch from waltje);
Added the Adaptec AHA-1542CF SCSI controller (patch from waltje);
Added preliminary (but still unfinished) Adaptec AHA-154x SCSI controller BIOS support (patch from waltje);
Added an ISABugger debugging device (patch from waltje);
Added sanity checks to the Direct3D code.
SCSI controller is now reset on x86 soft reset, fixes DOS driver hangs after soft reset;
SCSI controller reset control is now implemented more accurately, on a 50 ms timer;
For the PS/1 Model 2011, the Keyboard Input Port bit 6 now correctly reports if the currently selected (in FDC DOR) floppy drive is 3.5" or 5.25";
Commented out excess DMA logging;
Added support for FDF floppy images;
Fixed handling of CDB allocated length field for the CD-ROM INQUIRY command;
(S)VGA port 03C1 write is back again (it was incorrectly gone in some builds);
Commented out Compaq/Paradise VGA;
PS/1 Model 2121+ISA now correctly allows selecting graphics card.
IMG floppy image handler now fills the remaining bytes with 0xF6 if it has read less bytes than expected - fixes handling of truncated IMG's with a valid BPB;
HDI files are now written with the correct header;
FDC DUMP REGISTERS command is now implemented correctly, fixes FDC error on AMI 486 clone and AMI WinBIOS 486;
Commented out the Acer 386SX and the Phoenix 386 clone;
WinPCap code is now delayed loading (thanks to Rai-chan), the emulator should now be able to run without WinPCap installed if not using PCap;
The IBM PS/2 Model 30 NVR file is now saved in the same directly as the other NVR files;
Applied all the latest mainline PCem Voodoo commits.
Added IBM PS/2 Model 30 emulation per mainline PCem patch from dns2kv2;
Commented out the Chips & Technologies VGA 451 as it needs further work;
Added the ability to disable XTIDE;
Prepared the icon that will be used for stable builds.
Added the Samsung SPC-4200P;
Added the Chips & Technologies VGA 451;
Applied all mainline PCem commits;
Added Amstrad MegaPC 386DX model (exits per documentation that I have in German).
The CD-ROM IOCTL direct pass through code now does sanity check on the requested data size before passing the command - fixes crashes with some DMA-only host DVD drives;
The network poller is now in its own thread;
The hack is back in the emulation of the National Semiconductors PC87306 Super I/O Chip - it's the only way right now to have serial working on that board;
Fixed a part of the code that was still using NukedOPL even when OPL 3 was set to DOSBox OPL;
Applied all mainline PCem commits.
Floppy disk controller is now COMPLETELY reset on hard reset;
NukedOPL is now optional (but enabled by default) so people on older hardware can gain a few % of performance by going back to DOSBox OPL;
*.CPP files now get all the correct optimization flags applied;
Added NEC PowerMate V emulation - you can get into CMOS SETUP but it hangs before booting, and PCI graphics card don't work (yet).
Fixed a link-breaking bug in cdrom.c;
The AHA-154x now supports commands 0x28 (GET EXTENDED BIOS INFO) and 0x29 (UNLOCK MAILBOX) and no longer reports a firmware revision with scatter/gather bug;
The BusLogic now supports command 0x20 (RESET);
Fixed the GPIO register mapping on the National Semiconductors PC87306 Super I/O chip.
- Crash dumps now attempt to be created in the directory with 86Box.exe
- Crash dumps now attempt to find the full path + filename of the module
where the crash occured, and includes it if found
Fixed several ATAPI CD-ROM bugs;
Added some missing CPL override checks to the MMU translate functions;
Tertiary and quaternary IDE controllers are now automatically disabled if not a single device is attached to them;
Changed sleep time on compile from 10 seconds to 2 seconds.
Fixed IDE and ATAPI 8-bit data reads and writes by rewriting the IDE and CD-ROM PIO data read and write code so that the base code is now 8-bit;
Added some compiler directives that if set, will enable togglable logging and log breakpoints;
Empty IDE channels now always report a status of 0x10 rather than 0x20, and do it on port 3F6h/376h/36Eh/3EEh too, fixes OAKCDROM.SYS infinite loop when hitting an empty IDE channel.
Four CD-ROM drives are now emulated;
ATAPI DMA is now emulated;
Unified CD-ROM pass through to host drive handling;
Applied all (applicable) mainline PCem commits.
Moved CD-ROM read data buffer declaration and definitions to SCSI source files and headers, but still applying to IDE when needed.
SCSI Read commands now return the correct sectors on callback.
DMA bug fixes.
Added experimental NVidia Riva TNT2 emulation (patch from MoochMcGee);
ASUS P/I-P54TP4XE, ASUS P/I-P55T2P4, and ASUS P/I-P55TVP4 are back;
National Semiconductor PC87306 Super I/O chip now correctly reenables devices after a chip power cycle;
Several FDC improvements and the behavior is now a bit closer to real hardware (based on actual tests);
Added MR Intel Advanced/ATX with Microid Research BIOS with support for 4 floppy drives and up to 4 IDE controllers;
Added floppy drives 3 and 4, bringing the maximum to 4;
You can now connect hard disks to the tertiary IDE controller;
Correct undocumented behavior of the LEA instruction with register is back on 286 and later CPU's;
Pentium-rea models with Intel chipsets now have port 92 (with alternate reset and alternate A20 toggle);
Overhauled DMA channel read and write routines and fixed cascading;
Improved IMG detection of a bad BPB (or complete lack of a BPB);
Added preliminary emulation of PS/2 1.44 MB and PC-98 1.25 MB 3-mode drives (both have an inverted DENSEL pin);
Removed the incorrect Amstrad mouse patch from TheCollector1995;
Fixed ATAPI CD-ROM disk change detection;
Windows IOCTL CD-ROM handler now tries to use direct SCSI passthrough for more things, including obtaining CD-ROM capacity;
The Diamond Stealth32 (ET4000/W32p) now also works correctly on the two Award SiS 496/497 boxes;
The (S)VGA handler now converts 6-bit RAMDAC RGB channels to standard 8-bit RGB using a lookup table generated at emulator start, calculated using the correct intensity conversion method and treating intensity 64 as equivalent to 63;
Moved a few options from the Configuration dialog box to the menu;
SIO, PIIX, and PIIX3 now have the reset control register on port CF9 as they should;
Several bugfixes.
