Fixed all the reported bugs regarding the Settings dialog;
MIDI out device is now no longer reset to 0 after hard reset;
Removed all vestiges of the old disk activity flash;
The configuration file is no longer saved when it shouldn't be;
Redone the status bar icon updating so it is only done in win.c;
Made sure all variables in ibm.h are extern;
A lot of other bugfixes;
Added Mouse Systems Mouse emulation (patch from TheCollector1995);
Added IBM PS/1 Model 2133 (486) emulation (patch from TheCollector1995);
Tweaked the CPU dynamic recompiler cycle periods - 486SX 33 and 486DX 33 now work;
Increased compatibility with configuration files from before the previous commit.
Temporarily reverted serial port and serial mouse code back to the old one until the new code is fixed;
Fixed nvr_path handling - the NVR path no longer gets messed up at hard reset.
Thoroughly clean up the code to vastly reduce the number of compiler warnings and found and fixed several bugs in the process;
Applied all mainline PCem commits;
Added SCSI hard disk emulation;
Commented out all unfinished machines and graphics cards;
Added the AOpen AP53 and ASUS P/I-P55T2 machines as well as another Tyan 440FX machine, all three with AMI WinBIOS (patch from TheCollector1995);
Added the Diamond Stealth 3D 3000 (S3 ViRGE/VX) graphics card (patch from TheCollector1995);
Added the PS/2 XT IDE (AccuLogic) HDD Controller (patch from TheCollector1995);
Added Microsoft/Logitech Bus Mouse emulation (patch from waltje);
Overhauled the makefiles (patch from waltje);
Added the Adaptec AHA-1542CF SCSI controller (patch from waltje);
Added preliminary (but still unfinished) Adaptec AHA-154x SCSI controller BIOS support (patch from waltje);
Added an ISABugger debugging device (patch from waltje);
Added sanity checks to the Direct3D code.
SCSI controller is now reset on x86 soft reset, fixes DOS driver hangs after soft reset;
SCSI controller reset control is now implemented more accurately, on a 50 ms timer;
For the PS/1 Model 2011, the Keyboard Input Port bit 6 now correctly reports if the currently selected (in FDC DOR) floppy drive is 3.5" or 5.25";
Commented out excess DMA logging;
Added support for FDF floppy images;
Fixed handling of CDB allocated length field for the CD-ROM INQUIRY command;
(S)VGA port 03C1 write is back again (it was incorrectly gone in some builds);
Commented out Compaq/Paradise VGA;
PS/1 Model 2121+ISA now correctly allows selecting graphics card.
IMG floppy image handler now fills the remaining bytes with 0xF6 if it has read less bytes than expected - fixes handling of truncated IMG's with a valid BPB;
HDI files are now written with the correct header;
FDC DUMP REGISTERS command is now implemented correctly, fixes FDC error on AMI 486 clone and AMI WinBIOS 486;
Commented out the Acer 386SX and the Phoenix 386 clone;
WinPCap code is now delayed loading (thanks to Rai-chan), the emulator should now be able to run without WinPCap installed if not using PCap;
The IBM PS/2 Model 30 NVR file is now saved in the same directly as the other NVR files;
Applied all the latest mainline PCem Voodoo commits.
The tertiary and quaternary IDE controllers are now fully configurable;
The IRQ of the RTL8029AS network card is now configurable;
CopyQM floppy images are now supported.
Added experimental NVidia Riva TNT2 emulation (patch from MoochMcGee);
ASUS P/I-P54TP4XE, ASUS P/I-P55T2P4, and ASUS P/I-P55TVP4 are back;
National Semiconductor PC87306 Super I/O chip now correctly reenables devices after a chip power cycle;
Several FDC improvements and the behavior is now a bit closer to real hardware (based on actual tests);
Added MR Intel Advanced/ATX with Microid Research BIOS with support for 4 floppy drives and up to 4 IDE controllers;
Added floppy drives 3 and 4, bringing the maximum to 4;
You can now connect hard disks to the tertiary IDE controller;
Correct undocumented behavior of the LEA instruction with register is back on 286 and later CPU's;
Pentium-rea models with Intel chipsets now have port 92 (with alternate reset and alternate A20 toggle);
Overhauled DMA channel read and write routines and fixed cascading;
Improved IMG detection of a bad BPB (or complete lack of a BPB);
Added preliminary emulation of PS/2 1.44 MB and PC-98 1.25 MB 3-mode drives (both have an inverted DENSEL pin);
Removed the incorrect Amstrad mouse patch from TheCollector1995;
Fixed ATAPI CD-ROM disk change detection;
Windows IOCTL CD-ROM handler now tries to use direct SCSI passthrough for more things, including obtaining CD-ROM capacity;
The Diamond Stealth32 (ET4000/W32p) now also works correctly on the two Award SiS 496/497 boxes;
The (S)VGA handler now converts 6-bit RAMDAC RGB channels to standard 8-bit RGB using a lookup table generated at emulator start, calculated using the correct intensity conversion method and treating intensity 64 as equivalent to 63;
Moved a few options from the Configuration dialog box to the menu;
SIO, PIIX, and PIIX3 now have the reset control register on port CF9 as they should;
Several bugfixes.
FDI stream images are now also handled by the 86F handler;
Both floppy drives' motors now spin separately;
Added Plantronics ColorPlus emulation per patch from PCem forum;
Applied all mainline PCem commits;
Fixed several bugs.
Improved TeleDisk support;
Added support for ImageDisk (IMD) images;
Added MSR registers 186 and 570 for the Intel i686 CPU's;
Applied both mainline PCem commits.
Replaced IMG handler with one that now proxies to the 86F handler;
Applies the remaining Mainline PCem speedup commit;
Fixed the National Semiconductors PC87306 Super I/O Chip's serial port IRQ assignment;
DMF images are now loaded with the correct sector interleave, improving read/write speed;
XDF images are now loaded in a way that emulates the real order of the sectors on the track, improving read/write speed;
Added 16-bit physical memory read/write routines (mem_phys_readw, mem_phys_writew) and modified the 16-bit DMA code to use them instead of two 8-bit reads/writes.
Fixed 3.5" 2ED XDF structure;
Applied mainline PCem big recompiler speedup (up to 20% seen) commit;
Added support for floppy drive swapping with the Winbond W3877F Super I/O chip.
Fixed the RTL8029AS again (one of my "fixes" broke it);
RTL8029AS PCI register 4 is now written to;
Added incomplete (and currently commented out) emulation of the AWE64 PCI;
Replaced sector-based floppy emulation with more accurate code.
Fixed DOS boxes in Windows 9x with the Mach64/GX;
Applied mainline PCem commit that fixed the ET4000/W32p;
Finished the removal of the SVGA 8 MB maximum VRAM limit.
Cleaned up floppy code a lot and reverted to single poller;
Fixed segment present bit and limit checking at read/write within segment;
The ASUS boards now have memregs too;
RTC code improved based on suggestion by Sarah Walker;
Fixed SVGA odd/even emulation and added chain odd/even support;
Removed non-existent CPU's.
