Thoroughly clean up the code to vastly reduce the number of compiler warnings and found and fixed several bugs in the process;
Applied all mainline PCem commits;
Added SCSI hard disk emulation;
Commented out all unfinished machines and graphics cards;
Added the AOpen AP53 and ASUS P/I-P55T2 machines as well as another Tyan 440FX machine, all three with AMI WinBIOS (patch from TheCollector1995);
Added the Diamond Stealth 3D 3000 (S3 ViRGE/VX) graphics card (patch from TheCollector1995);
Added the PS/2 XT IDE (AccuLogic) HDD Controller (patch from TheCollector1995);
Added Microsoft/Logitech Bus Mouse emulation (patch from waltje);
Overhauled the makefiles (patch from waltje);
Added the Adaptec AHA-1542CF SCSI controller (patch from waltje);
Added preliminary (but still unfinished) Adaptec AHA-154x SCSI controller BIOS support (patch from waltje);
Added an ISABugger debugging device (patch from waltje);
Added sanity checks to the Direct3D code.
Fixed DMA emulation, fixes Olivetti M24;
(S)VGA emulation for PS/1 and PS/2 machines now uses the old, less accurate sense switches, fixes display error on POST;
Bit 2 of the AT keyboard input port is now always held active, fixes PS/2 mouse on PS/1 and PS/2 machines;
Fixed mouse type selection on non-AT boards;
Fixed RAM type selection;
The entire palette is now overwritten when a monochrome monitor type is selected, fixes graphics mode on Hercules;
Applied updated SCAT emulation patch from PCem forum;
Nvidia Riva and S3 Virge IRQ is now configurable;
Properly applied the mainline PCem commit that fixed the Bahamas64 on the Intel AMI BIOS boards;
Commented out the Diamond Stealth 64 and the Miro Crystal S3 Vision 964 due to their non-working state;
Changed version to 1.06.
On Windows, fatal now displays a message box, based on old PCem-X patch by RichardG;
Added emulation of the 287, 387, and 487SX floating point units and an option to enable them.
Added IBM PS/2 Model 30 emulation per mainline PCem patch from dns2kv2;
Commented out the Chips & Technologies VGA 451 as it needs further work;
Added the ability to disable XTIDE;
Prepared the icon that will be used for stable builds.
Added write port 3C1 to EGA and (S)VGA, fixed Microsoft Word 2.0 for DOS;
The RTL8029AS now correctly enables I/O port range when base address is changed via PCI registers with I/O access enabled;
Tentative fix for DirectDraw <-> Direct3D switching issues based on proposal from TheCollector1995;
Fixed 64-bit makefile;
Fixed LZF_C.C so it can compile for 64-bit Windows;
Applied all mainline PCem commits.
Improved the BusLogic incoming mailbox code;
The BusLogic callback is now three-phases and outgoing mailbox interrupts are emulated correctly;
Fixed the CD-ROM command READ DISC INFORMATION (0x51), fixes NetBSD crashing 86Box with segmentation fault when using the AHA-154x;
Added the CD-ROM command PAUSE/RESUME ALT (0xC2).
