1. Added an on-board S3 ViRGE DX (375) video card to the Intel AP440FX socket 8-based machine alongside its on-board CS4236B audio.
2. Sanity check for on-board S3 ViRGE devices.
1. Added the Diamond Stealth 64 Video VRAM 968-based card.
2. Removed the useless VLB-based Phoenix 868 and 968 cards.
3. The Diamond Stealth 64 Video VRAM specific drivers apparently use 0x83ca-0x83cb as aliases of the RAMDAC ports 0x83c6-0x83c7 (New MMIO mode). This makes the hardware cursor visible in those drivers on win3.1 using the IBM RGB RAMDAC.
4. A few more logs and sanity checks around LFB access and MMIO as well.
1. Corrected the ATI 1881x clocks for use with the ATI Mach8/32 and VGA Wonder chips. The CPU slowdowns should now be gone.
2. Merged I/O ports common to both the ATI and IBM 8514/A compatible chips where they have identical code (extended behavior is still separate). Code duplication is now less than before.
3. Fixed a general polygon pattern issue in the Mach8/32 affecting calc.exe in Win3.x and other stuff.
4. Mode changes are, once again, changed (ATI and IBM), as close as possible to the real thing without destroying existing resolutions.
5. The 8514/A Vertical Counter has been extended to 0xfff so that it can take 1280x1024 resolutions well offered by the Mach32 as well as a better way to change the IBM/ATI modes through a callback swap where approprietate.
6. in 8514/A mode, reads from the 0x3c6-0x3c9 ramdac range is redirected to the 8514/A RAMDAC (0x2ea-0x2ed).
7. LFB access in the Mach32 now no longer takes account of the SVGA derived rops. Fixes Mach32 display on NeXTSTEP/OPENSTEP 3.x/4.x
8. Reworked the Display Sense Status and Subsystem Status ports so that they're not copycats from MAME and instead follow the datasheet.
1. On both Mach'es: direct linear video memory access is now the default for LFB mapping: fixes Mach64 drivers on NeXTSTEP/OPENSTEP and keeps everything else intact.
2. Mach8/32: minor cleanup to mode change code.
CD-ROM side: fixed a mode sense page (0x08 Sony, used by both Sony and Texel drives) as well as corrected the Toshiba specific drive speeds (bytes_per_second).
NCR 5380 side: split the work into the generic 5380 core and the ASICs into separate sources (53c400 and T128) and added the T228 MCA adapter based on the 128.
ET3000AX: the chip in question should not support 1MB of video memory.
ET4000AX: the early TC6058AF revision can support 1MB of video memory (e.g.: Diamond Speedstar BIOS D3.10, undumped anyway), and actually don't update the rowoffset to 256 when using such chip in 320x200x256 mode. Fixes the copper demo in said chip revision.
