Matrox MGA:
A break from work can save the day all so to say. Fixes bitblt'ing on WinNT4.0/Win2000 using 32bpp modes and possibly other stuff using said Matrox chip.
XGA:
1. Added a proper poll so to have its timings independent of the SVGA core and changes its renderer accordingly, mainly a blank render one.
2. Workaround the Ctrl-Alt-Del reset of Windows 2.x so that it switches back to VGA text mode correctly when using the 0xA000 64K aperture (in vid_svga.c).
SVGA core:
Re-organized the way the different timers are organized so that the XGA and 8514/A pollers can coexist with the SVGA timer without conflicts.
ATI Mach32:
Reworked the true color renderer and made it a Mach32 exclusive due to its differences from the standard one. Fixes wrong rendered colors in NT using the 32bpp renderer in RGB mode.
Generic SVGA layer:
Added function pointers of the banked mapping for use with add-on cards with their own mapping when the VGA card banked mapping is not active or viceversa (e.g.: XGA).
XGA-1/2:
1. Reimplemented Area Fill and Boundary Mode as best as possible.
2. Fixed conflicts with banked mapping with VGA clones.
3. Fixed inverted colors (again) on accelerated 16bpp mode under OS/2.
Video7 with ATI 8514/A add-on.
Added a workaround (BIOS issue? I don't know) that disables 8514/A mode and reenables VGA mode when needed. Fixes screen freezes and polling issues with various drivers for Windows and others.
ATI Mach8-based (add-on only):
Do not override the clone VGA banked mapping with the standard VGA when needed. Fixes issues with banked mapping with ATI 8514/A enabled on cards with clone mappings such as Cirrus, Video7, Paradise/WD, etc.
S3:
1. Cleaned up the Short Stroke command processing.
2. Proceed calculating the error term only when it's equal or greater than the line length (Draw Line, Command 1 and also applies to Short Strokes, Command 0).
8514/A compatibles:
1. Reworked the polygon draw type A processing.
2. As with the S3, reworked the way error term is handled in the processing, and on Command 5 (Draw Polygon Boundary Line).
1. Initialize Multifunction indexes 0x0D and 0x0E properly, should fix inverted colors on S3 OS/2 Warp drivers.
2. Make the remaining Vision868/968 only ports handle the 32-bit toggling properly.
3. Cleanups
Fix nibble pixtrans on bitblt command (CMD 6), this makes icons and stuff on MS OS/2 1.10 Nokia's 8514 driver no longer glitchy (IBM's was already fine as is and it still is).
Cirrus 5436/46 and 5480.
Finally fixed the Solaris 2.6 font issue, was a dword swap one with color expansion.
S3.
1. Make 868/968 ignore horizontal skew, ergo horizontal override until a proper solution is found regarding hardware tests.
2. Fixed a minor mix issue with S3 911/924 Win3.1 drivers in 8bpp mode.
1. Finally add the ATI 8514/A Ultra add-on BIOS in both ISA and MCA variants (despite the ROM page failure on POST).
2. Fixed a mode switch bug in the Mach8 (both add-on and vga combo) when exiting the Win3.x GUI using the native drivers.
3. Corrected (best possible) the eeprom load of the Mach8 products.
4. Partial implementation of the FIFO on the 8514/A compatible products including Mach8/32 and plain IBM 8514/A.
1. ATI Extended 8514/A mode may not use bit 5 of ATI reg 0xb0 sometimes but at the same time it won't use the standard VGA way of setting up 256+ colors, therefore, in the VGA DAC writes, use standard VGA way to revert to VGA mode in the writes instead of relying on bit 5 of ATI reg 0xb0 being enabled/disabled there. Fixes mode switches in VLB/PCI configurations using Windows 9x and possibly other stuff, ISA is unaffected and still works fine.
2. Added more logs and and remove/set I/O handlers correctly for the PCI side.
Mark the ATI extended 8514/A mode accordingly (that is, if bit 5 of ATI reg 0xb0 and using ATI extended ports at the same time). Fixes wrong colors in some instances using standard IBM 8514/A drivers on Mach32.
1. Added the missing call to mach32_updatemapping from port 0x3CF through its index 6.
2. If the accelerator DAC is active and the extended 256 color bit is on too then enable 8514/A mode when needed, otherwise it's VGA mode or decided by the passthrough/clock selection ports.
3. VGA DAC reads are redirected to the 8514/A DAC reads only when 8514/A mode is on.
1. vga_on global variable removed, as it didn't play well with 2 subsystems at once (8514/A and XGA both enabled).
2. Emulate the Foreground/Background Color aliases of PIX_TRANS properly when not executing a command.
3. Voodoo 3D override now works properly (again) with Mach32 PCI cards and others by turning the 8514/A timer off and on accordingly.
1. Simplified 4bpp rendering mode.
2. Implement CRTC31 bit 0 functionality which enables/disables the vendor banks. Fixes Diamond Stealth 64 964 VRAM (VLB/PCI) detection on NT 3.1 (and possibly other cards) while keeping NT 3.1 347.1's full screen Command Prompt test normal without garbage using the 911/924 chips.
IBM 8514/A (MCA/ISA).
Added a configure button to the QT frontend for the amount of memory used by said add-on chips.
XGA:
Forgot a change about the 4mb aperture.
