/* * 86Box A hypervisor and IBM PC system emulator that specializes in * running old operating systems and software designed for IBM * PC systems and compatibles from 1981 through fairly recent * system designs based on the PCI bus. * * This file is part of the 86Box distribution. * * Roland MPU-401 emulation. * * Version: @(#)sound_mpu401.h 1.0.3 2018/09/11 * * Author: Sarah Walker, * DOSBox Team, * Miran Grca, * TheCollector1995, * Copyright 2008-2018 Sarah Walker. * Copyright 2008-2018 DOSBox Team. * Copyright 2016-2018 Miran Grca. * Copyright 2016-2018 TheCollector1995. */ #define MPU401_VERSION 0x15 #define MPU401_REVISION 0x01 #define MPU401_QUEUE 32 #define MPU401_TIMECONSTANT (60000000/1000.0f) #define MPU401_RESETBUSY 27.0f typedef enum MpuMode { M_UART, M_INTELLIGENT } MpuMode; #define M_MCA 0x10 typedef enum MpuDataType { T_OVERFLOW, T_MARK, T_MIDI_SYS, T_MIDI_NORM, T_COMMAND } MpuDataType; /* Messages sent to MPU-401 from host */ #define MSG_EOX 0xf7 #define MSG_OVERFLOW 0xf8 #define MSG_MARK 0xfc /* Messages sent to host from MPU-401 */ #define MSG_MPU_OVERFLOW 0xf8 #define MSG_MPU_COMMAND_REQ 0xf9 #define MSG_MPU_END 0xfc #define MSG_MPU_CLOCK 0xfd #define MSG_MPU_ACK 0xfe typedef struct mpu_t { int uart_mode, intelligent, irq, queue_pos, queue_used; uint8_t rx_data, is_mca, status, queue[MPU401_QUEUE], pos_regs[8]; MpuMode mode; struct track { int counter; uint8_t value[8], sys_val, vlength,length; MpuDataType type; } playbuf[8], condbuf; struct { int conductor, cond_req, cond_set, block_ack, playing, reset, wsd, wsm, wsd_start, run_irq, irq_pending, send_now, eoi_scheduled, data_onoff; uint8_t tmask, cmask, amask, channel, old_chan; uint16_t midi_mask, req_mask; uint32_t command_byte, cmd_pending; } state; struct { uint8_t timebase, old_timebase, tempo, old_tempo, tempo_rel, old_tempo_rel, tempo_grad, cth_rate, cth_counter; int clock_to_host,cth_active; } clock; pc_timer_t mpu401_event_callback, mpu401_eoi_callback, mpu401_reset_callback; } mpu_t; extern int mpu401_standalone_enable; extern const device_t mpu401_device; extern const device_t mpu401_mca_device; extern uint8_t MPU401_ReadData(mpu_t *mpu); extern void mpu401_init(mpu_t *mpu, uint16_t addr, int irq, int mode); extern void mpu401_device_add(void);