/*
 * 86Box    A hypervisor and IBM PC system emulator that specializes in
 *          running old operating systems and software designed for IBM
 *          PC systems and compatibles from 1981 through fairly recent
 *          system designs based on the PCI bus.
 *
 *          This file is part of the 86Box distribution.
 *
 *          Implementation of the SiS 85c496/85c497 chip.
 *
 *
 *
 * Authors: Miran Grca, <mgrca8@gmail.com>
 *
 *          Copyright 2019-2020 Miran Grca.
 */
#define USE_DRB_HACK
#include <stdarg.h>
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <wchar.h>
#define HAVE_STDARG_H
#include <86box/86box.h>
#include "cpu.h"
#include <86box/mem.h>
#include <86box/smram.h>
#include <86box/io.h>
#include <86box/pci.h>
#include <86box/device.h>
#include <86box/timer.h>
#include <86box/dma.h>
#include <86box/nvr.h>
#include <86box/pic.h>
#include <86box/plat_unused.h>
#include <86box/port_92.h>
#include <86box/hdc_ide.h>
#include <86box/machine.h>
#include <86box/chipset.h>
#include <86box/spd.h>
#ifndef USE_DRB_HACK
#include <86box/row.h>
#endif

typedef struct sis_85c496_t {
    uint8_t    cur_reg;
    uint8_t    rmsmiblk_count;
    uint8_t    pci_slot;
    uint8_t    pad;
#ifndef USE_DRB_HACK
    uint8_t    drb_default;
    uint8_t    drb_bits;
    uint8_t    pad0;
    uint8_t    pad1;
#endif
    uint8_t    regs[127];
    uint8_t    pci_conf[256];
    smram_t   *smram;
    pc_timer_t rmsmiblk_timer;
    port_92_t *port_92;
    nvr_t     *nvr;
} sis_85c496_t;

#ifdef ENABLE_SIS_85C496_LOG
int sis_85c496_do_log = ENABLE_SIS_85C496_LOG;

void
sis_85c496_log(const char *fmt, ...)
{
    va_list ap;

    if (sis_85c496_do_log) {
        va_start(ap, fmt);
        pclog_ex(fmt, ap);
        va_end(ap);
    }
}
#else
#    define sis_85c496_log(fmt, ...)
#endif

static void
sis_85c497_isa_write(uint16_t port, uint8_t val, void *priv)
{
    sis_85c496_t *dev = (sis_85c496_t *) priv;

    sis_85c496_log("[%04X:%08X] ISA Write %02X to   %04X\n", CS, cpu_state.pc, val, port);

    if (port == 0x22)
        dev->cur_reg = val;
    else if (port == 0x23)
        switch (dev->cur_reg) {
            case 0x01: /* Built-in 206 Timing Control */
                dev->regs[dev->cur_reg] = val;
                break;
            case 0x70: /* ISA Bus Clock Selection */
                dev->regs[dev->cur_reg] = val & 0xc0;
                break;
            case 0x71: /* ISA Bus Timing Control */
                dev->regs[dev->cur_reg] = val & 0xf6;
                break;
            case 0x72:
            case 0x76: /* SMOUT */
            case 0x74: /* BIOS Timer */
                dev->regs[dev->cur_reg] = val;
                break;
            case 0x73: /* BIOS Timer */
                dev->regs[dev->cur_reg] = val & 0xfd;
                break;
            case 0x75: /* DMA / Deturbo Control */
                dev->regs[dev->cur_reg] = val & 0xfc;
                dma_set_mask((val & 0x80) ? 0xffffffff : 0x00ffffff);
                break;
            default:
                break;
        }
}

static uint8_t
sis_85c497_isa_read(uint16_t port, void *priv)
{
    const sis_85c496_t *dev = (sis_85c496_t *) priv;
    uint8_t             ret = 0xff;

    if ((port == 0x23) && (dev->cur_reg < 0xc0))
        ret = dev->regs[dev->cur_reg];
    else if (port == 0x33)
        ret = 0x3c /*random_generate()*/;

    sis_85c496_log("[%04X:%08X] ISA Read  %02X from %04X\n", CS, cpu_state.pc, ret, port);

    return ret;
}

static void
sis_85c496_recalcmapping(sis_85c496_t *dev)
{
    uint32_t base;
    uint32_t shflags = 0;

    shadowbios       = 0;
    shadowbios_write = 0;

    for (uint8_t i = 0; i < 8; i++) {
        base = 0xc0000 + (i << 15);

        if (dev->pci_conf[0x44] & (1 << i)) {
            shadowbios |= (base >= 0xe0000) && (dev->pci_conf[0x45] & 0x02);
            shadowbios_write |= (base >= 0xe0000) && !(dev->pci_conf[0x45] & 0x01);
            shflags = (dev->pci_conf[0x45] & 0x02) ? MEM_READ_INTERNAL : MEM_READ_EXTANY;
            shflags |= (dev->pci_conf[0x45] & 0x01) ? MEM_WRITE_EXTANY : MEM_WRITE_INTERNAL;
            mem_set_mem_state_both(base, 0x8000, shflags);
        } else
            mem_set_mem_state_both(base, 0x8000, MEM_READ_EXTANY | MEM_WRITE_EXTANY);
    }

    flushmmucache_nopc();
}

static void
sis_85c496_ide_handler(sis_85c496_t *dev)
{
    uint8_t ide_cfg[2];

    ide_cfg[0] = dev->pci_conf[0x58];
    ide_cfg[1] = dev->pci_conf[0x59];

    ide_pri_disable();
    ide_sec_disable();

    if (ide_cfg[1] & 0x02) {
        ide_set_base(0, 0x0170);
        ide_set_side(0, 0x0376);
        ide_set_base(1, 0x01f0);
        ide_set_side(1, 0x03f6);

        if (ide_cfg[1] & 0x01) {
            if (!(ide_cfg[0] & 0x40))
                ide_pri_enable();
            if (!(ide_cfg[0] & 0x80))
                ide_sec_enable();
        }
    } else {
        ide_set_base(0, 0x01f0);
        ide_set_side(0, 0x03f6);
        ide_set_base(1, 0x0170);
        ide_set_side(1, 0x0376);

        if (ide_cfg[1] & 0x01) {
            if (!(ide_cfg[0] & 0x40))
                ide_sec_enable();
            if (!(ide_cfg[0] & 0x80))
                ide_pri_enable();
        }
    }
}

#ifndef USE_DRB_HACK
static void
sis_85c496_drb_recalc(sis_85c496_t *dev)
{
    int i;
    uint32_t boundary;

    for (i = 7; i >= 0; i--)
        row_disable(i);

    for (i = 0; i <= 7; i++) {
        boundary = ((uint32_t) dev->pci_conf[0x48 + i]);
        row_set_boundary(i, boundary);
    }

    flushmmucache();
}
#endif


/* 00 - 3F = PCI Configuration, 40 - 7F = 85C496, 80 - FF = 85C497 */
static void
sis_85c49x_pci_write(UNUSED(int func), int addr, uint8_t val, void *priv)
{
    sis_85c496_t *dev = (sis_85c496_t *) priv;
    uint8_t       old;
    uint8_t       valxor;
    uint8_t       smm_irq[4] = { 10, 11, 12, 15 };
    uint32_t      host_base;
    uint32_t      ram_base;
    uint32_t      size;

    old    = dev->pci_conf[addr];
    valxor = (dev->pci_conf[addr]) ^ val;

    sis_85c496_log("[%04X:%08X] PCI Write %02X to   %02X:%02X\n", CS, cpu_state.pc, val, func, addr);

    switch (addr) {
        /* PCI Configuration Header Registers (00h ~ 3Fh) */
        case 0x04: /* PCI Device Command */
            dev->pci_conf[addr] = val & 0x40;
            break;
        case 0x05: /* PCI Device Command */
            dev->pci_conf[addr] = val & 0x03;
            break;
        case 0x07: /* Device Status */
            dev->pci_conf[addr] &= ~(val & 0xf1);
            break;

        /* 86C496 Specific Registers (40h ~ 7Fh) */
        case 0x40: /* CPU Configuration */
            dev->pci_conf[addr] = val & 0x7f;
            break;
        case 0x41: /* DRAM Configuration */
            dev->pci_conf[addr] = val;
            break;
        case 0x42: /* Cache Configure */
            dev->pci_conf[addr]   = val;
            cpu_cache_ext_enabled = (val & 0x01);
            cpu_update_waitstates();
            break;
        case 0x43: /* Cache Configure */
            dev->pci_conf[addr] = val & 0x8f;
            break;
        case 0x44: /* Shadow Configure */
            dev->pci_conf[addr] = val;
            if (valxor & 0xff) {
                sis_85c496_recalcmapping(dev);
                if (((old & 0xf0) == 0xf0) && ((val & 0xf0) == 0x30))
                    flushmmucache_nopc();
                else if (((old & 0xf0) == 0xf0) && ((val & 0xf0) == 0x00))
                    flushmmucache_nopc();
                else
                    flushmmucache();
            }
            break;
        case 0x45: /* Shadow Configure */
            dev->pci_conf[addr] = val & 0x0f;
            if (valxor & 0x03)
                sis_85c496_recalcmapping(dev);
            break;
        case 0x46: /* Cacheable Control */
            dev->pci_conf[addr] = val;
            break;
        case 0x47: /* 85C496 Address Decoder */
            dev->pci_conf[addr] = val & 0x1f;
            break;
        case 0x48:
        case 0x49:
        case 0x4a:
        case 0x4b: /* DRAM Boundary */
        case 0x4c:
        case 0x4d:
        case 0x4e:
        case 0x4f:
#ifdef USE_DRB_HACK
            spd_write_drbs(dev->pci_conf, 0x48, 0x4f, 1);
#else
            dev->pci_conf[addr] = val;
            sis_85c496_drb_recalc(dev);
#endif
            break;
        case 0x50:
        case 0x51: /* Exclusive Area 0 Setup */
            dev->pci_conf[addr] = val;
            break;
        case 0x52:
        case 0x53: /* Exclusive Area 1 Setup */
            dev->pci_conf[addr] = val;
            break;
        case 0x54: /* Exclusive Area 2 Setup */
            dev->pci_conf[addr] = val;
            break;
        case 0x55: /* Exclusive Area 3 Setup */
            dev->pci_conf[addr] = val & 0xf0;
            break;
        case 0x56: /* PCI / Keyboard Configure */
            dev->pci_conf[addr] = val;
            if (valxor & 0x02) {
                port_92_remove(dev->port_92);
                if (val & 0x02)
                    port_92_add(dev->port_92);
            }
            break;
        case 0x57: /* Output Pin Configuration */
            dev->pci_conf[addr] = val;
            break;
        case 0x58: /* Build-in IDE Controller / VESA Bus Configuration */
            dev->pci_conf[addr] = val & 0xd7;
            if (valxor & 0xc0)
                sis_85c496_ide_handler(dev);
            break;
        case 0x59: /* Build-in IDE Controller / VESA Bus Configuration */
            dev->pci_conf[addr] = val;
            if (valxor & 0x03)
                sis_85c496_ide_handler(dev);
            break;
        case 0x5a: /* SMRAM Remapping Configuration */
            dev->pci_conf[addr] = val & 0xbe;
            if (valxor & 0x3e) {
                unmask_a20_in_smm = !!(val & 0x20);

                smram_disable_all();

                if (val & 0x02) {
                    host_base = 0x00060000;
                    ram_base  = 0x000a0000;
                    size      = 0x00010000;
                    switch ((val >> 3) & 0x03) {
                        case 0x00:
                            host_base = 0x00060000;
                            ram_base  = 0x000a0000;
                            break;
                        case 0x01:
                            host_base = 0x00060000;
                            ram_base  = 0x000b0000;
                            break;
                        case 0x02:
                            host_base = 0x000e0000;
                            ram_base  = 0x000a0000;
                            break;
                        case 0x03:
                            host_base = 0x000e0000;
                            ram_base  = 0x000b0000;
                            break;
                        default:
                            break;
                    }

                    smram_enable(dev->smram, host_base, ram_base, size,
                                 ((val & 0x06) == 0x06), (val & 0x02));
                }
            }
            break;
        case 0x5b: /* Programmable I/O Traps Configure */
        case 0x5c:
        case 0x5d: /* Programmable I/O Trap 0 Base */
        case 0x5e:
        case 0x5f: /* Programmable I/O Trap 0 Base */
        case 0x60:
        case 0x61: /* IDE Controller Channel 0 Configuration */
        case 0x62:
        case 0x63: /* IDE Controller Channel 1 Configuration */
        case 0x64:
        case 0x65: /* Exclusive Area 3 Setup */
        case 0x66: /* EDO DRAM Configuration */
        case 0x68:
        case 0x69: /* Asymmetry DRAM Configuration */
            dev->pci_conf[addr] = val;
            break;
        case 0x67: /* Miscellaneous Control */
            dev->pci_conf[addr] = val & 0xf9;
            cpu_cpurst_on_sr = ((val & 0xa0) == 0x80) && !(dev->pci_conf[0xc6] & 0x08);
            break;

        /* 86C497 Specific Registers (80h ~ FFh) */
        case 0x80: /* PMU Configuration */
        case 0x85: /* STPCLK# Event Control */
        case 0x86:
        case 0x87: /* STPCLK# Deassertion IRQ Selection */
        case 0x89: /* Fast Timer Count */
        case 0x8a: /* Generic Timer Count */
        case 0x8b: /* Slow Timer Count */
        case 0x8e: /* Clock Throttling On Timer Count */
        case 0x8f: /* Clock Throttling Off Timer Count */
        case 0x90: /* Clock Throttling On Timer Reload Condition */
        case 0x92: /* Fast Timer Reload Condition */
        case 0x94: /* Generic Timer Reload Condition */
        case 0x96: /* Slow Timer Reload Condition */
        case 0x98:
        case 0x99: /* Fast Timer Reload IRQ Selection */
        case 0x9a:
        case 0x9b: /* Generic Timer Reload IRQ Selection */
        case 0x9c:
        case 0x9d: /* Slow Timer Reload IRQ Selection */
        case 0xa2: /* SMI Request Status Selection */
        case 0xa4:
        case 0xa5: /* SMI Request IRQ Selection */
        case 0xa6:
        case 0xa7: /* Clock Throttlign On Timer Reload IRQ Selection */
        case 0xa8: /* GPIO Control */
        case 0xaa: /* GPIO DeBounce Count */
        case 0xd2: /* Exclusive Area 2 Base Address */
            dev->pci_conf[addr] = val;
            break;
        case 0x81: /* PMU CPU Type Configuration */
            dev->pci_conf[addr] = val & 0x9f;
            break;
        case 0x88: /* Timer Control */
            dev->pci_conf[addr] = val & 0x3f;
            break;
        case 0x8d: /* RMSMIBLK Timer Count */
            dev->pci_conf[addr] = val;
            dev->rmsmiblk_count = val;
            timer_stop(&dev->rmsmiblk_timer);
            if (val >= 0x02)
                timer_on_auto(&dev->rmsmiblk_timer, 35.0);
            break;
        case 0x91: /* Clock Throttling On Timer Reload Condition */
        case 0x93: /* Fast Timer Reload Condition */
        case 0x95: /* Generic Timer Reload Condition */
            dev->pci_conf[addr] = val & 0x03;
            break;
        case 0x97: /* Slow Timer Reload Condition */
            dev->pci_conf[addr] = val & 0xc3;
            break;
        case 0x9e: /* Soft-SMI Generation / RMSMIBLK Trigger */
            if (!smi_block && (val & 0x01) && (dev->pci_conf[0x80] & 0x80) && (dev->pci_conf[0xa2] & 0x10)) {
                if (dev->pci_conf[0x80] & 0x10)
                    picint(1 << smm_irq[dev->pci_conf[0x81] & 0x03]);
                else
                    smi_raise();
                smi_block = 1;
                dev->pci_conf[0xa0] |= 0x10;
            }
            if (val & 0x02) {
                timer_stop(&dev->rmsmiblk_timer);
                if (dev->rmsmiblk_count >= 0x02)
                    timer_on_auto(&dev->rmsmiblk_timer, 35.0);
            }
            break;
        case 0xa0:
        case 0xa1: /* SMI Request Status */
            dev->pci_conf[addr] &= ~val;
            break;
        case 0xa3: /* SMI Request Status Selection */
            dev->pci_conf[addr] = val & 0x7f;
            break;
        case 0xa9: /* GPIO SMI Request Status */
            dev->pci_conf[addr] = ~(val & 0x03);
            break;
        case 0xc0: /* PCI INTA# -to-IRQ Link */
        case 0xc1: /* PCI INTB# -to-IRQ Link */
        case 0xc2: /* PCI INTC# -to-IRQ Link */
        case 0xc3: /* PCI INTD# -to-IRQ Link */
            dev->pci_conf[addr] = val & 0x8f;
            if (val & 0x80)
                pci_set_irq_routing(PCI_INTA + (addr & 0x03), val & 0xf);
            else
                pci_set_irq_routing(PCI_INTA + (addr & 0x03), PCI_IRQ_DISABLED);
            break;
        case 0xc6: /* 85C497 Post / INIT Configuration */
            dev->pci_conf[addr] = val & 0x0f;
            cpu_cpurst_on_sr = ((dev->pci_conf[0x67] & 0xa0) == 0x80) && !(val & 0x08);
            soft_reset_pci = !!(val & 0x04);
            break;
        case 0xc8:
        case 0xc9:
        case 0xca:
        case 0xcb: /* Mail Box */
            dev->pci_conf[addr] = val;
            break;
        case 0xd0: /* ISA BIOS Configuration */
            dev->pci_conf[addr] = val & 0xfb;
            break;
        case 0xd1: /* ISA Address Decoder */
            if (dev->pci_conf[0xd0] & 0x01)
                dev->pci_conf[addr] = val;
            break;
        case 0xd3: /* Exclusive Area 2 Base Address */
            dev->pci_conf[addr] = val & 0xf0;
            break;
        case 0xd4: /* Miscellaneous Configuration */
            dev->pci_conf[addr] = val & 0x6e;
            nvr_bank_set(0, !!(val & 0x40), dev->nvr);
            break;

        default:
            break;
    }
}

static uint8_t
sis_85c49x_pci_read(UNUSED(int func), int addr, void *priv)
{
    const sis_85c496_t *dev = (sis_85c496_t *) priv;
    uint8_t             ret = dev->pci_conf[addr];

    switch (addr) {
        case 0xa0:
            ret &= 0x10;
            break;
        case 0xa1:
            ret = 0x00;
            break;
        case 0x82: /*Port 22h Mirror*/
            ret = dev->cur_reg;
            break;
        case 0x83: /*Port 70h Mirror*/
            ret = inb(0x70);
            break;

        default:
            break;
    }

    sis_85c496_log("[%04X:%08X] PCI Read  %02X from %02X:%02X\n", CS, cpu_state.pc, ret, func, addr);

    return ret;
}

static void
sis_85c496_rmsmiblk_count(void *priv)
{
    sis_85c496_t *dev = (sis_85c496_t *) priv;

    dev->rmsmiblk_count--;

    if (dev->rmsmiblk_count == 1) {
        smi_block           = 0;
        dev->rmsmiblk_count = 0;
        timer_stop(&dev->rmsmiblk_timer);
    } else
        timer_on_auto(&dev->rmsmiblk_timer, 35.0);
}

static void
sis_85c497_isa_reset(sis_85c496_t *dev)
{
    memset(dev->regs, 0, sizeof(dev->regs));

    dev->regs[0x01] = 0xc0;
    dev->regs[0x71] = 0x01;
    dev->regs[0x72] = 0xff;
    dev->regs[0x76] = 0xff;

    dma_set_mask(0x00ffffff);

    io_removehandler(0x0022, 0x0002,
                     sis_85c497_isa_read, NULL, NULL, sis_85c497_isa_write, NULL, NULL, dev);
    io_removehandler(0x0033, 0x0001,
                     sis_85c497_isa_read, NULL, NULL, sis_85c497_isa_write, NULL, NULL, dev);
    io_sethandler(0x0022, 0x0002,
                  sis_85c497_isa_read, NULL, NULL, sis_85c497_isa_write, NULL, NULL, dev);
    io_sethandler(0x0033, 0x0001,
                  sis_85c497_isa_read, NULL, NULL, sis_85c497_isa_write, NULL, NULL, dev);
}

static void
sis_85c496_reset(void *priv)
{
    sis_85c496_t *dev = (sis_85c496_t *) priv;

    sis_85c49x_pci_write(0, 0x44, 0x00, dev);
    sis_85c49x_pci_write(0, 0x45, 0x00, dev);
    sis_85c49x_pci_write(0, 0x58, 0x00, dev);
    sis_85c49x_pci_write(0, 0x59, 0x00, dev);
    sis_85c49x_pci_write(0, 0x5a, 0x00, dev);
    // sis_85c49x_pci_write(0, 0x5a, 0x06, dev);

    for (uint8_t i = 0; i < 8; i++)
        dev->pci_conf[0x48 + i] = 0x02;

    sis_85c49x_pci_write(0, 0x80, 0x00, dev);
    sis_85c49x_pci_write(0, 0x81, 0x00, dev);
    sis_85c49x_pci_write(0, 0x9e, 0x00, dev);
    sis_85c49x_pci_write(0, 0x8d, 0x00, dev);
    sis_85c49x_pci_write(0, 0xa0, 0xff, dev);
    sis_85c49x_pci_write(0, 0xa1, 0xff, dev);
    sis_85c49x_pci_write(0, 0xc0, 0x00, dev);
    sis_85c49x_pci_write(0, 0xc1, 0x00, dev);
    sis_85c49x_pci_write(0, 0xc2, 0x00, dev);
    sis_85c49x_pci_write(0, 0xc3, 0x00, dev);
    sis_85c49x_pci_write(0, 0xc8, 0x00, dev);
    sis_85c49x_pci_write(0, 0xc9, 0x00, dev);
    sis_85c49x_pci_write(0, 0xca, 0x00, dev);
    sis_85c49x_pci_write(0, 0xcb, 0x00, dev);

    sis_85c49x_pci_write(0, 0xd0, 0x79, dev);
    sis_85c49x_pci_write(0, 0xd1, 0xff, dev);
    sis_85c49x_pci_write(0, 0xd0, 0x78, dev);
    sis_85c49x_pci_write(0, 0xd4, 0x00, dev);

    dev->pci_conf[0x67] = 0x00;
    dev->pci_conf[0xc6] = 0x00;

    ide_pri_disable();
    ide_sec_disable();

    nvr_bank_set(0, 0, dev->nvr);

    sis_85c497_isa_reset(dev);

    cpu_cpurst_on_sr = 0;
    soft_reset_pci = 0;
}

static void
sis_85c496_close(void *priv)
{
    sis_85c496_t *dev = (sis_85c496_t *) priv;

    smram_del(dev->smram);

    free(dev);
}

static void
    *
    sis_85c496_init(const device_t *info)
{
    sis_85c496_t *dev = calloc(1, sizeof(sis_85c496_t));

    dev->smram = smram_add();

    /* PCI Configuration Header Registers (00h ~ 3Fh) */
    dev->pci_conf[0x00] = 0x39; /* SiS */
    dev->pci_conf[0x01] = 0x10;
    dev->pci_conf[0x02] = 0x96; /* 496/497 */
    dev->pci_conf[0x03] = 0x04;
    dev->pci_conf[0x04] = 0x07;
    dev->pci_conf[0x06] = 0x80;
    dev->pci_conf[0x07] = 0x02;
    dev->pci_conf[0x08] = 0x02; /* Device revision */
    dev->pci_conf[0x09] = 0x00; /* Device class (PCI bridge) */
    dev->pci_conf[0x0b] = 0x06;

    /* 86C496 Specific Registers (40h ~ 7Fh) */

    /* 86C497 Specific Registers (80h ~ FFh) */
    dev->pci_conf[0xd0] = 0x78; /* ROM at E0000-FFFFF, Flash enable. */
    dev->pci_conf[0xd1] = 0xff;

    pci_add_card(PCI_ADD_NORTHBRIDGE, sis_85c49x_pci_read, sis_85c49x_pci_write, dev, &dev->pci_slot);

#if 0
    sis_85c497_isa_reset(dev);
#endif

    dev->port_92 = device_add(&port_92_device);
    port_92_set_period(dev->port_92, 2ULL * TIMER_USEC);
    port_92_set_features(dev->port_92, 0, 0);

    sis_85c496_recalcmapping(dev);

    ide_pri_disable();
    ide_sec_disable();

    if (info->local)
        dev->nvr = device_add(&ami_1994_nvr_device);
    else
        dev->nvr = device_add(&at_nvr_device);

    dma_high_page_init();

    timer_add(&dev->rmsmiblk_timer, sis_85c496_rmsmiblk_count, dev, 0);

#ifndef USE_DRB_HACK
    row_device.local = 7 | (1 << 8) | (0x02 << 16) | (8 << 24);
    device_add((const device_t *) &row_device);
#endif

    sis_85c496_reset(dev);

    return dev;
}

const device_t sis_85c496_device = {
    .name          = "SiS 85c496/85c497",
    .internal_name = "sis_85c496",
    .flags         = DEVICE_PCI,
    .local         = 0,
    .init          = sis_85c496_init,
    .close         = sis_85c496_close,
    .reset         = sis_85c496_reset,
    .available     = NULL,
    .speed_changed = NULL,
    .force_redraw  = NULL,
    .config        = NULL
};

const device_t sis_85c496_ls486e_device = {
    .name          = "SiS 85c496/85c497 (Lucky Star LS-486E)",
    .internal_name = "sis_85c496_ls486e",
    .flags         = DEVICE_PCI,
    .local         = 1,
    .init          = sis_85c496_init,
    .close         = sis_85c496_close,
    .reset         = sis_85c496_reset,
    .available     = NULL,
    .speed_changed = NULL,
    .force_redraw  = NULL,
    .config        = NULL
};