1753 lines
51 KiB
C
1753 lines
51 KiB
C
/*
|
|
* VARCem Virtual ARchaeological Computer EMulator.
|
|
* An emulator of (mostly) x86-based PC systems and devices,
|
|
* using the ISA,EISA,VLB,MCA and PCI system buses, roughly
|
|
* spanning the era between 1981 and 1995.
|
|
*
|
|
* Implementation of a memory expansion board for the ISA Bus.
|
|
*
|
|
* Although modern systems use direct-connect local buses to
|
|
* connect the CPU with its memory, originally the main system
|
|
* bus(es) were used for that. Memory expension cards could add
|
|
* memory to the system through the ISA bus, using a variety of
|
|
* techniques.
|
|
*
|
|
* The majority of these boards could provide some (additional)
|
|
* conventional (low) memory, extended (high) memory on 80286
|
|
* and higher systems, as well as EMS bank-switched memory.
|
|
*
|
|
* This implementation uses the LIM 3.2 specifications for EMS.
|
|
*
|
|
* With the EMS method, the system's standard memory is expanded
|
|
* by means of bank-switching. One or more 'frames' in the upper
|
|
* memory area (640K-1024K) are used as viewports into an array
|
|
* of RAM pages numbered 0 to N. Each page is defined to be 16KB
|
|
* in size, so, for a 1024KB board, 64 such pages are available.
|
|
* I/O control registers are used to set up the mappings. More
|
|
* modern boards even have multiple 'copies' of those registers,
|
|
* which can be switched very fast, to allow for multitasking.
|
|
*
|
|
* TODO: The EV159 is supposed to support 16b EMS transfers, but the
|
|
* EMM.sys driver for it doesn't seem to want to do that..
|
|
*
|
|
*
|
|
*
|
|
* Authors: Fred N. van Kempen, <decwiz@yahoo.com>
|
|
*
|
|
* Copyright 2018 Fred N. van Kempen.
|
|
*
|
|
* Redistribution and use in source and binary forms, with
|
|
* or without modification, are permitted provided that the
|
|
* following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the entire
|
|
* above notice, this list of conditions and the following
|
|
* disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the
|
|
* following disclaimer in the documentation and/or other
|
|
* materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of the copyright holder nor the names
|
|
* of its contributors may be used to endorse or promote
|
|
* products derived from this software without specific
|
|
* prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
|
|
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
#include <stdarg.h>
|
|
#include <stdio.h>
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
#include <stdlib.h>
|
|
#include <wchar.h>
|
|
#define HAVE_STDARG_H
|
|
#include <86box/86box.h>
|
|
#include <86box/machine.h>
|
|
#include <86box/io.h>
|
|
#include <86box/mem.h>
|
|
#include <86box/device.h>
|
|
#include <86box/ui.h>
|
|
#include <86box/plat.h>
|
|
#include <86box/isamem.h>
|
|
|
|
#include "cpu.h"
|
|
|
|
#define ISAMEM_IBMXT_CARD 0
|
|
#define ISAMEM_GENXT_CARD 1
|
|
#define ISAMEM_RAMCARD_CARD 2
|
|
#define ISAMEM_SYSTEMCARD_CARD 3
|
|
#define ISAMEM_IBMAT_CARD 4
|
|
#define ISAMEM_GENAT_CARD 5
|
|
#define ISAMEM_P5PAK_CARD 6
|
|
#define ISAMEM_A6PAK_CARD 7
|
|
#define ISAMEM_EMS5150_CARD 8
|
|
#define ISAMEM_EV159_CARD 10
|
|
#define ISAMEM_RAMPAGEXT_CARD 11
|
|
#define ISAMEM_ABOVEBOARD_CARD 12
|
|
#define ISAMEM_BRAT_CARD 13
|
|
#define ISAMEM_EV165A_CARD 14
|
|
|
|
#define ISAMEM_DEBUG 0
|
|
|
|
#define RAM_TOPMEM (640 << 10) /* end of low memory */
|
|
#define RAM_UMAMEM (384 << 10) /* upper memory block */
|
|
#define RAM_EXTMEM (1024 << 10) /* start of high memory */
|
|
|
|
#define EMS_MAXSIZE (2048 << 10) /* max EMS memory size */
|
|
#define EMS_PGSIZE (16 << 10) /* one page is this big */
|
|
#define EMS_MAXPAGE 4 /* number of viewport pages */
|
|
|
|
#define EXTRAM_CONVENTIONAL 0
|
|
#define EXTRAM_HIGH 1
|
|
#define EXTRAM_XMS 2
|
|
|
|
typedef struct emsreg_t {
|
|
int8_t enabled; /* 1=ENABLED */
|
|
uint8_t page; /* page# in EMS RAM */
|
|
uint8_t frame; /* (varies with board) */
|
|
char pad;
|
|
uint8_t *addr; /* start addr in EMS RAM */
|
|
mem_mapping_t mapping; /* mapping entry for page */
|
|
} emsreg_t;
|
|
|
|
typedef struct ext_ram_t {
|
|
uint32_t base;
|
|
uint8_t *ptr;
|
|
} ext_ram_t;
|
|
|
|
typedef struct memdev_t {
|
|
const char *name;
|
|
uint8_t board : 6; /* board type */
|
|
uint8_t reserved : 2;
|
|
|
|
uint8_t flags;
|
|
#define FLAG_CONFIG 0x01 /* card is configured */
|
|
#define FLAG_WIDE 0x10 /* card uses 16b mode */
|
|
#define FLAG_FAST 0x20 /* fast (<= 120ns) chips */
|
|
#define FLAG_EMS 0x40 /* card has EMS mode enabled */
|
|
|
|
uint16_t total_size; /* configured size in KB */
|
|
uint32_t base_addr; /* configured I/O address */
|
|
uint32_t start_addr; /* configured memory start */
|
|
uint32_t frame_addr; /* configured frame address */
|
|
|
|
uint16_t ems_size; /* EMS size in KB */
|
|
uint16_t ems_pages; /* EMS size in pages */
|
|
uint32_t ems_start; /* start of EMS in RAM */
|
|
|
|
uint8_t *ram; /* allocated RAM buffer */
|
|
|
|
ext_ram_t ext_ram[3]; /* structures for the mappings */
|
|
|
|
mem_mapping_t low_mapping; /* mapping for low mem */
|
|
mem_mapping_t high_mapping; /* mapping for high mem */
|
|
|
|
emsreg_t ems[EMS_MAXPAGE]; /* EMS controller registers */
|
|
} memdev_t;
|
|
|
|
#ifdef ENABLE_ISAMEM_LOG
|
|
int isamem_do_log = ENABLE_ISAMEM_LOG;
|
|
|
|
static void
|
|
isamem_log(const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
|
|
if (isamem_do_log) {
|
|
va_start(ap, fmt);
|
|
pclog_ex(fmt, ap);
|
|
va_end(ap);
|
|
}
|
|
}
|
|
#else
|
|
# define isamem_log(fmt, ...)
|
|
#endif
|
|
|
|
/* Why this convoluted setup with the mem_dev stuff when it's much simpler
|
|
to just pass the exec pointer as p as well, and then just use that. */
|
|
/* Read one byte from onboard RAM. */
|
|
static uint8_t
|
|
ram_readb(uint32_t addr, void *priv)
|
|
{
|
|
ext_ram_t *dev = (ext_ram_t *) priv;
|
|
uint8_t ret = 0xff;
|
|
|
|
/* Grab the data. */
|
|
ret = *(uint8_t *) (dev->ptr + (addr - dev->base));
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Read one word from onboard RAM. */
|
|
static uint16_t
|
|
ram_readw(uint32_t addr, void *priv)
|
|
{
|
|
ext_ram_t *dev = (ext_ram_t *) priv;
|
|
uint16_t ret = 0xffff;
|
|
|
|
/* Grab the data. */
|
|
ret = *(uint16_t *) (dev->ptr + (addr - dev->base));
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Write one byte to onboard RAM. */
|
|
static void
|
|
ram_writeb(uint32_t addr, uint8_t val, void *priv)
|
|
{
|
|
ext_ram_t *dev = (ext_ram_t *) priv;
|
|
|
|
/* Write the data. */
|
|
*(uint8_t *) (dev->ptr + (addr - dev->base)) = val;
|
|
}
|
|
|
|
/* Write one word to onboard RAM. */
|
|
static void
|
|
ram_writew(uint32_t addr, uint16_t val, void *priv)
|
|
{
|
|
ext_ram_t *dev = (ext_ram_t *) priv;
|
|
|
|
/* Write the data. */
|
|
*(uint16_t *) (dev->ptr + (addr - dev->base)) = val;
|
|
}
|
|
|
|
/* Read one byte from onboard paged RAM. */
|
|
static uint8_t
|
|
ems_readb(uint32_t addr, void *priv)
|
|
{
|
|
memdev_t *dev = (memdev_t *) priv;
|
|
uint8_t ret = 0xff;
|
|
|
|
/* Grab the data. */
|
|
ret = *(uint8_t *) (dev->ems[(addr & 0xffff) >> 14].addr + (addr & 0x3fff));
|
|
#if ISAMEM_DEBUG
|
|
if ((addr % 4096) == 0)
|
|
isamem_log("EMS readb(%06x) = %02x\n", addr - dev & 0x3fff, ret);
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Read one word from onboard paged RAM. */
|
|
static uint16_t
|
|
ems_readw(uint32_t addr, void *priv)
|
|
{
|
|
memdev_t *dev = (memdev_t *) priv;
|
|
uint16_t ret = 0xffff;
|
|
|
|
/* Grab the data. */
|
|
ret = *(uint16_t *) (dev->ems[(addr & 0xffff) >> 14].addr + (addr & 0x3fff));
|
|
#if ISAMEM_DEBUG
|
|
if ((addr % 4096) == 0)
|
|
isamem_log("EMS readw(%06x) = %04x\n", addr - dev & 0x3fff, ret);
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Write one byte to onboard paged RAM. */
|
|
static void
|
|
ems_writeb(uint32_t addr, uint8_t val, void *priv)
|
|
{
|
|
memdev_t *dev = (memdev_t *) priv;
|
|
|
|
/* Write the data. */
|
|
#if ISAMEM_DEBUG
|
|
if ((addr % 4096) == 0)
|
|
isamem_log("EMS writeb(%06x, %02x)\n", addr - dev & 0x3fff, val);
|
|
#endif
|
|
*(uint8_t *) (dev->ems[(addr & 0xffff) >> 14].addr + (addr & 0x3fff)) = val;
|
|
}
|
|
|
|
/* Write one word to onboard paged RAM. */
|
|
static void
|
|
ems_writew(uint32_t addr, uint16_t val, void *priv)
|
|
{
|
|
memdev_t *dev = (memdev_t *) priv;
|
|
|
|
/* Write the data. */
|
|
#if ISAMEM_DEBUG
|
|
if ((addr % 4096) == 0)
|
|
isamem_log("EMS writew(%06x, %04x)\n", addr & 0x3fff, val);
|
|
#endif
|
|
*(uint16_t *) (dev->ems[(addr & 0xffff) >> 14].addr + (addr & 0x3fff)) = val;
|
|
}
|
|
|
|
/* Handle a READ operation from one of our registers. */
|
|
static uint8_t
|
|
ems_read(uint16_t port, void *priv)
|
|
{
|
|
const memdev_t *dev = (memdev_t *) priv;
|
|
uint8_t ret = 0xff;
|
|
int vpage;
|
|
|
|
/* Get the viewport page number. */
|
|
vpage = (port / EMS_PGSIZE);
|
|
port &= (EMS_PGSIZE - 1);
|
|
|
|
switch (port - dev->base_addr) {
|
|
case 0x0000: /* page number register */
|
|
ret = dev->ems[vpage].page;
|
|
if (dev->ems[vpage].enabled)
|
|
ret |= 0x80;
|
|
break;
|
|
|
|
case 0x0001: /* W/O */
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
#if ISAMEM_DEBUG
|
|
isamem_log("ISAMEM: read(%04x) = %02x)\n", port, ret);
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Handle a WRITE operation to one of our registers. */
|
|
static void
|
|
ems_write(uint16_t port, uint8_t val, void *priv)
|
|
{
|
|
memdev_t *dev = (memdev_t *) priv;
|
|
int vpage;
|
|
|
|
/* Get the viewport page number. */
|
|
vpage = (port / EMS_PGSIZE);
|
|
port &= (EMS_PGSIZE - 1);
|
|
|
|
#if ISAMEM_DEBUG
|
|
isamem_log("ISAMEM: write(%04x, %02x) page=%d\n", port, val, vpage);
|
|
#endif
|
|
|
|
switch (port - dev->base_addr) {
|
|
case 0x0000: /* page mapping registers */
|
|
/* Set the page number. */
|
|
dev->ems[vpage].enabled = (val & 0x80);
|
|
dev->ems[vpage].page = (val & 0x7f);
|
|
|
|
/* Make sure we can do that.. */
|
|
if (dev->flags & FLAG_CONFIG) {
|
|
if (dev->ems[vpage].page < dev->ems_pages) {
|
|
/* Pre-calculate the page address in EMS RAM. */
|
|
dev->ems[vpage].addr = dev->ram + dev->ems_start + ((val & 0x7f) * EMS_PGSIZE);
|
|
} else {
|
|
/* That page does not exist. */
|
|
dev->ems[vpage].enabled = 0;
|
|
}
|
|
|
|
if (dev->ems[vpage].enabled) {
|
|
/* Update the EMS RAM address for this page. */
|
|
mem_mapping_set_exec(&dev->ems[vpage].mapping,
|
|
dev->ems[vpage].addr);
|
|
|
|
/* Enable this page. */
|
|
mem_mapping_enable(&dev->ems[vpage].mapping);
|
|
} else {
|
|
/* Disable this page. */
|
|
mem_mapping_disable(&dev->ems[vpage].mapping);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 0x0001: /* page frame registers */
|
|
/*
|
|
* The EV-159 EMM driver configures the frame address
|
|
* by setting bits in these registers. The information
|
|
* in their manual is unclear, but here is what was
|
|
* found out by repeatedly changing EMM's config:
|
|
*
|
|
* 00 04 08 Address
|
|
* -----------------
|
|
* 80 c0 e0 C0000
|
|
* 80 c0 e0 C4000
|
|
* 80 c0 e0 C8000
|
|
* 80 c0 e0 CC000
|
|
* 80 c0 e0 D0000
|
|
* 80 c0 e0 D4000
|
|
* 80 c0 e0 D8000
|
|
* 80 c0 e0 DC000
|
|
* 80 c0 e0 E0000
|
|
*/
|
|
isamem_log("EMS: write(%02x) to register 1 !\n");
|
|
dev->ems[vpage].frame = val;
|
|
if (val)
|
|
dev->flags |= FLAG_CONFIG;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Initialize the device for use. */
|
|
static void *
|
|
isamem_init(const device_t *info)
|
|
{
|
|
memdev_t *dev;
|
|
uint32_t k;
|
|
uint32_t t;
|
|
uint32_t addr;
|
|
uint32_t tot;
|
|
uint8_t *ptr;
|
|
|
|
/* Find our device and create an instance. */
|
|
dev = (memdev_t *) malloc(sizeof(memdev_t));
|
|
memset(dev, 0x00, sizeof(memdev_t));
|
|
dev->name = info->name;
|
|
dev->board = info->local;
|
|
|
|
/* Do per-board initialization. */
|
|
tot = 0;
|
|
switch (dev->board) {
|
|
case ISAMEM_IBMXT_CARD: /* IBM PC/XT Memory Expansion Card */
|
|
case ISAMEM_GENXT_CARD: /* Generic PC/XT Memory Expansion Card */
|
|
case ISAMEM_RAMCARD_CARD: /* Microsoft RAMCard for IBM PC */
|
|
case ISAMEM_SYSTEMCARD_CARD: /* Microsoft SystemCard */
|
|
case ISAMEM_P5PAK_CARD: /* Paradise Systems 5-PAK */
|
|
case ISAMEM_A6PAK_CARD: /* AST SixPakPlus */
|
|
dev->total_size = device_get_config_int("size");
|
|
dev->start_addr = device_get_config_int("start");
|
|
tot = dev->total_size;
|
|
break;
|
|
|
|
case ISAMEM_IBMAT_CARD: /* IBM PC/AT Memory Expansion Card */
|
|
case ISAMEM_GENAT_CARD: /* Generic PC/AT Memory Expansion Card */
|
|
dev->total_size = device_get_config_int("size");
|
|
dev->start_addr = device_get_config_int("start");
|
|
tot = dev->total_size;
|
|
dev->flags |= FLAG_WIDE;
|
|
break;
|
|
|
|
case ISAMEM_EMS5150_CARD: /* Micro Mainframe EMS-5150(T) */
|
|
dev->base_addr = device_get_config_hex16("base");
|
|
dev->total_size = device_get_config_int("size");
|
|
dev->frame_addr = 0xD0000;
|
|
dev->flags |= (FLAG_EMS | FLAG_CONFIG);
|
|
break;
|
|
|
|
case ISAMEM_EV159_CARD: /* Everex EV-159 RAM 3000 */
|
|
dev->base_addr = device_get_config_hex16("base");
|
|
dev->total_size = device_get_config_int("size");
|
|
dev->start_addr = device_get_config_int("start");
|
|
tot = device_get_config_int("length");
|
|
if (!!device_get_config_int("width"))
|
|
dev->flags |= FLAG_WIDE;
|
|
if (!!device_get_config_int("speed"))
|
|
dev->flags |= FLAG_FAST;
|
|
if (!!device_get_config_int("ems"))
|
|
dev->flags |= FLAG_EMS;
|
|
dev->frame_addr = 0xE0000;
|
|
break;
|
|
|
|
case ISAMEM_EV165A_CARD: /* Everex Maxi Magic EV-165A */
|
|
dev->base_addr = device_get_config_hex16("base");
|
|
dev->total_size = device_get_config_int("size");
|
|
dev->start_addr = device_get_config_int("start");
|
|
tot = device_get_config_int("length");
|
|
if (!!device_get_config_int("speed"))
|
|
dev->flags |= FLAG_FAST;
|
|
if (!!device_get_config_int("ems"))
|
|
dev->flags |= FLAG_EMS;
|
|
dev->frame_addr = 0xE0000;
|
|
break;
|
|
|
|
case ISAMEM_RAMPAGEXT_CARD: /* AST RAMpage/XT */
|
|
case ISAMEM_ABOVEBOARD_CARD: /* Intel AboveBoard */
|
|
case ISAMEM_BRAT_CARD: /* BocaRAM/AT */
|
|
dev->base_addr = device_get_config_hex16("base");
|
|
dev->total_size = device_get_config_int("size");
|
|
dev->start_addr = device_get_config_int("start");
|
|
dev->frame_addr = device_get_config_hex20("frame");
|
|
if (!!device_get_config_int("width"))
|
|
dev->flags |= FLAG_WIDE;
|
|
if (!!device_get_config_int("speed"))
|
|
dev->flags |= FLAG_FAST;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Fix up the memory start address. */
|
|
dev->start_addr <<= 10;
|
|
|
|
/* Say hello! */
|
|
isamem_log("ISAMEM: %s (%iKB", info->name, dev->total_size);
|
|
if (tot && (dev->total_size != tot))
|
|
isamem_log(", %iKB for RAM", tot);
|
|
if (dev->flags & FLAG_FAST)
|
|
isamem_log(", FAST");
|
|
if (dev->flags & FLAG_WIDE)
|
|
isamem_log(", 16BIT");
|
|
|
|
isamem_log(")\n");
|
|
|
|
/* Force (back to) 8-bit bus if needed. */
|
|
if ((!is286) && (dev->flags & FLAG_WIDE)) {
|
|
isamem_log("ISAMEM: not AT+ system, forcing 8-bit mode!\n");
|
|
dev->flags &= ~FLAG_WIDE;
|
|
}
|
|
|
|
/* Allocate and initialize our RAM. */
|
|
k = dev->total_size << 10;
|
|
dev->ram = (uint8_t *) malloc(k);
|
|
memset(dev->ram, 0x00, k);
|
|
ptr = dev->ram;
|
|
|
|
/*
|
|
* The 'Memory Start Address' switch indicates at which address
|
|
* we should start adding memory. No memory is added if it is
|
|
* set to 0.
|
|
*/
|
|
tot <<= 10;
|
|
addr = dev->start_addr;
|
|
if (addr > 0 && tot > 0) {
|
|
/* Adjust K for the RAM we will use. */
|
|
k -= tot;
|
|
|
|
/*
|
|
* First, see if we have to expand the conventional
|
|
* (low) memory area. This can extend up to 640KB,
|
|
* so check this first.
|
|
*/
|
|
t = (addr < RAM_TOPMEM) ? RAM_TOPMEM - addr : 0;
|
|
if (t > 0) {
|
|
/*
|
|
* We need T bytes to extend that area.
|
|
*
|
|
* If the board doesn't have that much, grab
|
|
* as much as we can.
|
|
*/
|
|
if (t > tot)
|
|
t = tot;
|
|
isamem_log("ISAMEM: RAM at %05iKB (%iKB)\n", addr >> 10, t >> 10);
|
|
|
|
dev->ext_ram[EXTRAM_CONVENTIONAL].ptr = ptr;
|
|
dev->ext_ram[EXTRAM_CONVENTIONAL].base = addr;
|
|
|
|
/* Create, initialize and enable the low-memory mapping. */
|
|
mem_mapping_add(&dev->low_mapping, addr, t,
|
|
ram_readb,
|
|
(dev->flags & FLAG_WIDE) ? ram_readw : NULL,
|
|
NULL,
|
|
ram_writeb,
|
|
(dev->flags & FLAG_WIDE) ? ram_writew : NULL,
|
|
NULL,
|
|
ptr, MEM_MAPPING_EXTERNAL, &dev->ext_ram[EXTRAM_CONVENTIONAL]);
|
|
|
|
/* Tell the memory system this is external RAM. */
|
|
mem_set_mem_state(addr, t,
|
|
MEM_READ_EXTERNAL | MEM_WRITE_EXTERNAL);
|
|
|
|
/* Update pointers. */
|
|
ptr += t;
|
|
tot -= t;
|
|
addr += t;
|
|
}
|
|
|
|
/* Skip to high memory if needed. */
|
|
if ((addr == RAM_TOPMEM) && (tot >= RAM_UMAMEM)) {
|
|
/*
|
|
* We have more RAM available, but we are at the
|
|
* top of conventional RAM. So, the next 384K are
|
|
* skipped, and placed into different mappings so
|
|
* they can be re-mapped later.
|
|
*/
|
|
t = RAM_UMAMEM; /* 384KB */
|
|
|
|
isamem_log("ISAMEM: RAM at %05iKB (%iKB)\n", addr >> 10, t >> 10);
|
|
|
|
dev->ext_ram[EXTRAM_HIGH].ptr = ptr;
|
|
dev->ext_ram[EXTRAM_HIGH].base = addr + tot;
|
|
|
|
/* Update and enable the remap. */
|
|
mem_mapping_set(&ram_remapped_mapping,
|
|
addr + tot, t,
|
|
ram_readb, ram_readw, NULL,
|
|
ram_writeb, ram_writew, NULL,
|
|
ptr, MEM_MAPPING_EXTERNAL,
|
|
&dev->ext_ram[EXTRAM_HIGH]);
|
|
mem_mapping_disable(&ram_remapped_mapping);
|
|
|
|
/* Tell the memory system this is external RAM. */
|
|
mem_set_mem_state(addr + tot, t,
|
|
MEM_READ_EXTERNAL | MEM_WRITE_EXTERNAL);
|
|
|
|
/* Update pointers. */
|
|
ptr += t;
|
|
tot -= t;
|
|
addr += t;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Next, on systems that support it (80286 and up), we can add
|
|
* (some of) our RAM to the system as Extended Memory, that is,
|
|
* memory located above 1MB. This memory cannot be addressed in
|
|
* real mode (so, not by DOS, for example) but it can be used in
|
|
* protected mode.
|
|
*/
|
|
if (is286 && addr > 0 && tot > 0) {
|
|
t = tot;
|
|
isamem_log("ISAMEM: RAM at %05iKB (%iKB)\n", addr >> 10, t >> 10);
|
|
|
|
dev->ext_ram[EXTRAM_XMS].ptr = ptr;
|
|
dev->ext_ram[EXTRAM_XMS].base = addr;
|
|
|
|
/* Create, initialize and enable the high-memory mapping. */
|
|
mem_mapping_add(&dev->high_mapping, addr, t,
|
|
ram_readb, ram_readw, NULL,
|
|
ram_writeb, ram_writew, NULL,
|
|
ptr, MEM_MAPPING_EXTERNAL, &dev->ext_ram[EXTRAM_XMS]);
|
|
|
|
/* Tell the memory system this is external RAM. */
|
|
mem_set_mem_state(addr, t, MEM_READ_EXTERNAL | MEM_WRITE_EXTERNAL);
|
|
|
|
/* Update pointers. */
|
|
ptr += t;
|
|
tot -= t;
|
|
addr += t;
|
|
}
|
|
|
|
isa_mem_size += dev->total_size - (k >> 10);
|
|
|
|
/* If EMS is enabled, use the remainder for EMS. */
|
|
if (dev->flags & FLAG_EMS) {
|
|
/* EMS 3.2 cannot have more than 2048KB per board. */
|
|
t = k;
|
|
if (t > EMS_MAXSIZE)
|
|
t = EMS_MAXSIZE;
|
|
|
|
/* Set up where EMS begins in local RAM, and how much we have. */
|
|
dev->ems_start = ptr - dev->ram;
|
|
dev->ems_size = t >> 10;
|
|
dev->ems_pages = t / EMS_PGSIZE;
|
|
isamem_log("ISAMEM: EMS enabled, I/O=%04XH, %iKB (%i pages)",
|
|
dev->base_addr, dev->ems_size, dev->ems_pages);
|
|
if (dev->frame_addr > 0)
|
|
isamem_log(", Frame=%05XH", dev->frame_addr);
|
|
|
|
isamem_log("\n");
|
|
|
|
/*
|
|
* For each supported page (we can have a maximum of 4),
|
|
* create, initialize and disable the mappings, and set
|
|
* up the I/O control handler.
|
|
*/
|
|
for (uint8_t i = 0; i < EMS_MAXPAGE; i++) {
|
|
/* Create and initialize a page mapping. */
|
|
mem_mapping_add(&dev->ems[i].mapping,
|
|
dev->frame_addr + (EMS_PGSIZE * i), EMS_PGSIZE,
|
|
ems_readb,
|
|
(dev->flags & FLAG_WIDE) ? ems_readw : NULL,
|
|
NULL,
|
|
ems_writeb,
|
|
(dev->flags & FLAG_WIDE) ? ems_writew : NULL,
|
|
NULL,
|
|
ptr, MEM_MAPPING_EXTERNAL,
|
|
dev);
|
|
|
|
/* For now, disable it. */
|
|
mem_mapping_disable(&dev->ems[i].mapping);
|
|
|
|
/* Set up an I/O port handler. */
|
|
io_sethandler(dev->base_addr + (EMS_PGSIZE * i), 2,
|
|
ems_read, NULL, NULL, ems_write, NULL, NULL, dev);
|
|
}
|
|
}
|
|
|
|
/* Let them know our device instance. */
|
|
return ((void *) dev);
|
|
}
|
|
|
|
/* Remove the device from the system. */
|
|
static void
|
|
isamem_close(void *priv)
|
|
{
|
|
memdev_t *dev = (memdev_t *) priv;
|
|
|
|
if (dev->flags & FLAG_EMS) {
|
|
for (uint8_t i = 0; i < EMS_MAXPAGE; i++) {
|
|
io_removehandler(dev->base_addr + (EMS_PGSIZE * i), 2,
|
|
ems_read, NULL, NULL, ems_write, NULL, NULL, dev);
|
|
}
|
|
}
|
|
|
|
if (dev->ram != NULL)
|
|
free(dev->ram);
|
|
|
|
free(dev);
|
|
}
|
|
|
|
static const device_config_t ibmxt_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 128,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 512,
|
|
.step = 16
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "start",
|
|
.description = "Start Address",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 256,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 576,
|
|
.step = 64
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t ibmxt_device = {
|
|
.name = "IBM PC/XT Memory Expansion",
|
|
.internal_name = "ibmxt",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_IBMXT_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = ibmxt_config
|
|
};
|
|
|
|
static const device_config_t genericxt_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 16,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 640,
|
|
.step = 16
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "start",
|
|
.description = "Start Address",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 624,
|
|
.step = 16
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t genericxt_device = {
|
|
.name = "Generic PC/XT Memory Expansion",
|
|
.internal_name = "genericxt",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_GENXT_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = genericxt_config
|
|
};
|
|
|
|
static const device_config_t msramcard_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 64,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 256,
|
|
.step = 64
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "start",
|
|
.description = "Start Address",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 624,
|
|
.step = 64
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t msramcard_device = {
|
|
.name = "Microsoft RAMCard for IBM PC",
|
|
.internal_name = "msramcard",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_RAMCARD_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = msramcard_config
|
|
};
|
|
|
|
static const device_config_t mssystemcard_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 64,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 256,
|
|
.step = 64
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "start",
|
|
.description = "Start Address",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 624,
|
|
.step = 64
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t mssystemcard_device = {
|
|
.name = "Microsoft SystemCard",
|
|
.internal_name = "mssystemcard",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_SYSTEMCARD_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = mssystemcard_config
|
|
};
|
|
|
|
static const device_config_t ibmat_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 512,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 12288,
|
|
.step = 512
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "start",
|
|
.description = "Start Address",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 512,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 15872,
|
|
.step = 512
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t ibmat_device = {
|
|
.name = "IBM PC/AT Memory Expansion",
|
|
.internal_name = "ibmat",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_IBMAT_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = ibmat_config
|
|
};
|
|
|
|
static const device_config_t genericat_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 512,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 16384,
|
|
.step = 512
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "start",
|
|
.description = "Start Address",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 512,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 15872,
|
|
.step = 128
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t genericat_device = {
|
|
.name = "Generic PC/AT Memory Expansion",
|
|
.internal_name = "genericat",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_GENAT_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = genericat_config
|
|
};
|
|
|
|
static const device_config_t p5pak_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 128,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 384,
|
|
.step = 64
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "start",
|
|
.description = "Start Address",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 512,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 64,
|
|
.max = 576,
|
|
.step = 64
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t p5pak_device = {
|
|
.name = "Paradise Systems 5-PAK",
|
|
.internal_name = "p5pak",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_P5PAK_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = p5pak_config
|
|
};
|
|
|
|
static const device_config_t a6pak_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 64,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 576,
|
|
.step = 64
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "start",
|
|
.description = "Start Address",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 256,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 64,
|
|
.max = 512,
|
|
.step = 64
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t a6pak_device = {
|
|
.name = "AST SixPakPlus",
|
|
.internal_name = "a6pak",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_A6PAK_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = a6pak_config
|
|
};
|
|
|
|
static const device_config_t ems5150_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 256,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 2048,
|
|
.step = 64
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "base",
|
|
.description = "Address",
|
|
.type = CONFIG_HEX16,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "Disabled", .value = 0x0000 },
|
|
{ .description = "Board 1", .value = 0x0208 },
|
|
{ .description = "Board 2", .value = 0x020a },
|
|
{ .description = "Board 3", .value = 0x020c },
|
|
{ .description = "Board 4", .value = 0x020e },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t ems5150_device = {
|
|
.name = "Micro Mainframe EMS-5150(T)",
|
|
.internal_name = "ems5150",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_EMS5150_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = ems5150_config
|
|
};
|
|
|
|
static const device_config_t ev159_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 512,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 3072,
|
|
.step = 512
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "start",
|
|
.description = "Start Address",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 16128,
|
|
.step = 128
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "length",
|
|
.description = "Contiguous Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 16384,
|
|
.step = 128
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "width",
|
|
.description = "I/O Width",
|
|
.type = CONFIG_SELECTION,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "8-bit", .value = 0 },
|
|
{ .description = "16-bit", .value = 1 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{
|
|
.name = "speed",
|
|
.description = "Transfer Speed",
|
|
.type = CONFIG_SELECTION,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "Standard (150ns)", .value = 0 },
|
|
{ .description = "High-Speed (120ns)", .value = 1 },
|
|
{ .description = "" }
|
|
}
|
|
},
|
|
{
|
|
.name = "ems",
|
|
.description = "EMS mode",
|
|
.type = CONFIG_SELECTION,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "Disabled", .value = 0 },
|
|
{ .description = "Enabled", .value = 1 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{
|
|
.name = "base",
|
|
.description = "Address",
|
|
.type = CONFIG_HEX16,
|
|
.default_string = "",
|
|
.default_int = 0x0258,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "208H", .value = 0x0208 },
|
|
{ .description = "218H", .value = 0x0218 },
|
|
{ .description = "258H", .value = 0x0258 },
|
|
{ .description = "268H", .value = 0x0268 },
|
|
{ .description = "2A8H", .value = 0x02A8 },
|
|
{ .description = "2B8H", .value = 0x02B8 },
|
|
{ .description = "2E8H", .value = 0x02E8 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t ev159_device = {
|
|
.name = "Everex EV-159 RAM 3000 Deluxe",
|
|
.internal_name = "ev159",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_EV159_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = ev159_config
|
|
};
|
|
|
|
static const device_config_t ev165a_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 512,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 2048,
|
|
.step = 512
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "start",
|
|
.description = "Start Address",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 896,
|
|
.step = 128
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "length",
|
|
.description = "Contiguous Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 16384,
|
|
.step = 128
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{
|
|
.name = "speed",
|
|
.description = "Transfer Speed",
|
|
.type = CONFIG_SELECTION,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "Standard (150ns)", .value = 0 },
|
|
{ .description = "High-Speed (120ns)", .value = 1 },
|
|
{ .description = "" }
|
|
}
|
|
},
|
|
{
|
|
.name = "ems",
|
|
.description = "EMS mode",
|
|
.type = CONFIG_SELECTION,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "Disabled", .value = 0 },
|
|
{ .description = "Enabled", .value = 1 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{
|
|
.name = "base",
|
|
.description = "Address",
|
|
.type = CONFIG_HEX16,
|
|
.default_string = "",
|
|
.default_int = 0x0258,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "208H", .value = 0x0208 },
|
|
{ .description = "218H", .value = 0x0218 },
|
|
{ .description = "258H", .value = 0x0258 },
|
|
{ .description = "268H", .value = 0x0268 },
|
|
{ .description = "2A8H", .value = 0x02A8 },
|
|
{ .description = "2B8H", .value = 0x02B8 },
|
|
{ .description = "2E8H", .value = 0x02E8 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t ev165a_device = {
|
|
.name = "Everex Magi Magic EV-165A",
|
|
.internal_name = "ev159",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_EV165A_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = ev165a_config
|
|
};
|
|
|
|
#if defined(DEV_BRANCH) && defined(USE_ISAMEM_BRAT)
|
|
static const device_config_t brat_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "base",
|
|
.description = "Address",
|
|
.type = CONFIG_HEX16,
|
|
.default_string = "",
|
|
.default_int = 0x0258,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "208H", .value = 0x0208 },
|
|
{ .description = "218H", .value = 0x0218 },
|
|
{ .description = "258H", .value = 0x0258 },
|
|
{ .description = "268H", .value = 0x0268 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{
|
|
.name = "frame",
|
|
.description = "Frame Address",
|
|
.type = CONFIG_HEX20,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "Disabled", .value = 0x00000 },
|
|
{ .description = "D000H", .value = 0xD0000 },
|
|
{ .description = "E000H", .value = 0xE0000 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{
|
|
.name = "width",
|
|
.description = "I/O Width",
|
|
.type = CONFIG_SELECTION,
|
|
.default_string = "",
|
|
.default_int = 8,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "8-bit", .value = 8 },
|
|
{ .description = "16-bit", .value = 16 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{
|
|
.name = "speed",
|
|
.description = "Transfer Speed",
|
|
.type = CONFIG_SELECTION,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "Standard", .value = 0 },
|
|
{ .description = "High-Speed", .value = 1 },
|
|
{ .description = "" }
|
|
}
|
|
},
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 128,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 8192,
|
|
.step = 512
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t brat_device = {
|
|
.name = "BocaRAM/AT",
|
|
.internal_name = "brat",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_BRAT_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = brat_config
|
|
};
|
|
#endif
|
|
|
|
#if defined(DEV_BRANCH) && defined(USE_ISAMEM_RAMPAGE)
|
|
static const device_config_t rampage_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "base",
|
|
.description = "Address",
|
|
.type = CONFIG_HEX16,
|
|
.default_string = "",
|
|
.default_int = 0x0258,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "208H", .value = 0x0208 },
|
|
{ .description = "218H", .value = 0x0218 },
|
|
{ .description = "258H", .value = 0x0258 },
|
|
{ .description = "268H", .value = 0x0268 },
|
|
{ .description = "2A8H", .value = 0x02A8 },
|
|
{ .description = "2B8H", .value = 0x02B8 },
|
|
{ .description = "2E8H", .value = 0x02E8 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{
|
|
.name = "frame",
|
|
.description = "Frame Address",
|
|
.type = CONFIG_HEX20,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "Disabled", .value = 0x00000 },
|
|
{ .description = "C000H", .value = 0xC0000 },
|
|
{ .description = "D000H", .value = 0xD0000 },
|
|
{ .description = "E000H", .value = 0xE0000 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{
|
|
.name = "width",
|
|
.description = "I/O Width",
|
|
.type = CONFIG_SELECTION,
|
|
.default_string = "",
|
|
.default_int = 8,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "8-bit", .value = 8 },
|
|
{ .description = "16-bit", .value = 16 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{
|
|
.name = "speed",
|
|
.description = "Transfer Speed",
|
|
.type = CONFIG_SELECTION,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "Standard", .value = 0 },
|
|
{ .description = "High-Speed", .value = 1 },
|
|
{ .description = "" }
|
|
}
|
|
},
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 128,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 8192,
|
|
.step = 128
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t rampage_device = {
|
|
.name = "AST RAMpage/XT",
|
|
.internal_name = "rampage",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_RAMPAGEXT_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = rampage_config
|
|
};
|
|
#endif
|
|
|
|
#if defined(DEV_BRANCH) && defined(USE_ISAMEM_IAB)
|
|
static const device_config_t iab_config[] = {
|
|
// clang-format off
|
|
{
|
|
.name = "base",
|
|
.description = "Address",
|
|
.type = CONFIG_HEX16,
|
|
.default_string = "",
|
|
.default_int = 0x0258,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "208H", .value = 0x0208 },
|
|
{ .description = "218H", .value = 0x0218 },
|
|
{ .description = "258H", .value = 0x0258 },
|
|
{ .description = "268H", .value = 0x0268 },
|
|
{ .description = "2A8H", .value = 0x02A8 },
|
|
{ .description = "2B8H", .value = 0x02B8 },
|
|
{ .description = "2E8H", .value = 0x02E8 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{
|
|
.name = "frame",
|
|
.description = "Frame Address",
|
|
.type = CONFIG_HEX20,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "Disabled", .value = 0x00000 },
|
|
{ .description = "C000H", .value = 0xC0000 },
|
|
{ .description = "D000H", .value = 0xD0000 },
|
|
{ .description = "E000H", .value = 0xE0000 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{
|
|
.name = "width",
|
|
.description = "I/O Width",
|
|
.type = CONFIG_SELECTION,
|
|
.default_string = "",
|
|
.default_int = 8,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "8-bit", .value = 8 },
|
|
{ .description = "16-bit", .value = 16 },
|
|
{ .description = "" }
|
|
},
|
|
},
|
|
{
|
|
.name = "speed",
|
|
.description = "Transfer Speed",
|
|
.type = CONFIG_SELECTION,
|
|
.default_string = "",
|
|
.default_int = 0,
|
|
.file_filter = "",
|
|
.spinner = { 0 },
|
|
.selection = {
|
|
{ .description = "Standard", .value = 0 },
|
|
{ .description = "High-Speed", .value = 1 },
|
|
{ .description = "" }
|
|
}
|
|
},
|
|
{
|
|
.name = "size",
|
|
.description = "Memory Size",
|
|
.type = CONFIG_SPINNER,
|
|
.default_string = "",
|
|
.default_int = 128,
|
|
.file_filter = "",
|
|
.spinner = {
|
|
.min = 0,
|
|
.max = 8192,
|
|
.step = 128
|
|
},
|
|
.selection = { { 0 } }
|
|
},
|
|
{ .name = "", .description = "", .type = CONFIG_END }
|
|
// clang-format on
|
|
};
|
|
|
|
static const device_t iab_device = {
|
|
.name = "Intel AboveBoard",
|
|
.internal_name = "iab",
|
|
.flags = DEVICE_ISA,
|
|
.local = ISAMEM_ABOVEBOARD_CARD,
|
|
.init = isamem_init,
|
|
.close = isamem_close,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = iab_config
|
|
};
|
|
#endif
|
|
|
|
static const device_t isa_none_device = {
|
|
.name = "None",
|
|
.internal_name = "none",
|
|
.flags = 0,
|
|
.local = 0,
|
|
.init = NULL,
|
|
.close = NULL,
|
|
.reset = NULL,
|
|
{ .available = NULL },
|
|
.speed_changed = NULL,
|
|
.force_redraw = NULL,
|
|
.config = NULL
|
|
};
|
|
|
|
static const struct {
|
|
const device_t *dev;
|
|
} boards[] = {
|
|
// clang-format off
|
|
{ &isa_none_device },
|
|
{ &ibmxt_device },
|
|
{ &genericxt_device },
|
|
{ &msramcard_device },
|
|
{ &mssystemcard_device },
|
|
{ &ibmat_device },
|
|
{ &genericat_device },
|
|
{ &p5pak_device },
|
|
{ &a6pak_device },
|
|
{ &ems5150_device },
|
|
{ &ev159_device },
|
|
{ &ev165a_device },
|
|
#if defined(DEV_BRANCH) && defined(USE_ISAMEM_BRAT)
|
|
{ &brat_device },
|
|
#endif
|
|
#if defined(DEV_BRANCH) && defined(USE_ISAMEM_RAMPAGE)
|
|
{ &rampage_device },
|
|
#endif
|
|
#if defined(DEV_BRANCH) && defined(USE_ISAMEM_IAB)
|
|
{ &iab_device },
|
|
#endif
|
|
{ NULL }
|
|
// clang-format on
|
|
};
|
|
|
|
void
|
|
isamem_reset(void)
|
|
{
|
|
int k;
|
|
|
|
/* We explicitly set to zero here or bad things happen */
|
|
isa_mem_size = 0;
|
|
|
|
for (uint8_t i = 0; i < ISAMEM_MAX; i++) {
|
|
k = isamem_type[i];
|
|
if (k == 0)
|
|
continue;
|
|
|
|
/* Add the instance to the system. */
|
|
device_add_inst(boards[k].dev, i + 1);
|
|
}
|
|
}
|
|
|
|
const char *
|
|
isamem_get_name(int board)
|
|
{
|
|
if (boards[board].dev == NULL)
|
|
return (NULL);
|
|
|
|
return (boards[board].dev->name);
|
|
}
|
|
|
|
const char *
|
|
isamem_get_internal_name(int board)
|
|
{
|
|
return device_get_internal_name(boards[board].dev);
|
|
}
|
|
|
|
int
|
|
isamem_get_from_internal_name(const char *s)
|
|
{
|
|
int c = 0;
|
|
|
|
while (boards[c].dev != NULL) {
|
|
if (!strcmp(boards[c].dev->internal_name, s))
|
|
return c;
|
|
c++;
|
|
}
|
|
|
|
/* Not found. */
|
|
return 0;
|
|
}
|
|
|
|
const device_t *
|
|
isamem_get_device(int board)
|
|
{
|
|
/* Add the instance to the system. */
|
|
return boards[board].dev;
|
|
}
|