1774 lines
50 KiB
C
1774 lines
50 KiB
C
/*
|
|
* 86Box A hypervisor and IBM PC system emulator that specializes in
|
|
* running old operating systems and software designed for IBM
|
|
* PC systems and compatibles from 1981 through fairly recent
|
|
* system designs based on the PCI bus.
|
|
*
|
|
* This file is part of the 86Box distribution.
|
|
*
|
|
* Video 7 VGA 1024i emulation.
|
|
*
|
|
*
|
|
*
|
|
* Authors: Sarah Walker, <http://pcem-emulator.co.uk/>
|
|
* Miran Grca, <mgrca8@gmail.com>
|
|
*
|
|
* Copyright 2019 Sarah Walker.
|
|
* Copyright 2019 Miran Grca.
|
|
*/
|
|
#include <stdio.h>
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
#include <stdlib.h>
|
|
#include <wchar.h>
|
|
#include <86box/86box.h>
|
|
#include "cpu.h"
|
|
#include <86box/io.h>
|
|
#include <86box/mca.h>
|
|
#include <86box/mem.h>
|
|
#include <86box/timer.h>
|
|
#include <86box/pic.h>
|
|
#include <86box/rom.h>
|
|
#include <86box/device.h>
|
|
#include <86box/video.h>
|
|
#include <86box/vid_svga.h>
|
|
#include <86box/vid_svga_render.h>
|
|
|
|
|
|
typedef struct ht216_t
|
|
{
|
|
svga_t svga;
|
|
|
|
mem_mapping_t linear_mapping;
|
|
|
|
rom_t bios_rom;
|
|
|
|
uint32_t vram_mask, linear_base;
|
|
uint8_t adjust_cursor, monitor_type;
|
|
|
|
int ext_reg_enable;
|
|
int isabus;
|
|
int mca;
|
|
|
|
uint8_t read_bank_reg[2], write_bank_reg[2];
|
|
uint16_t id, misc;
|
|
uint32_t read_banks[2], write_banks[2];
|
|
|
|
uint8_t bg_latch[8];
|
|
uint8_t fg_latch[4];
|
|
uint8_t bg_plane_sel, fg_plane_sel;
|
|
|
|
uint8_t ht_regs[256];
|
|
uint8_t extensions, reg_3cb;
|
|
|
|
uint8_t pos_regs[8];
|
|
} ht216_t;
|
|
|
|
|
|
#define HT_MISC_PAGE_SEL (1 << 5)
|
|
|
|
/*Shifts CPU VRAM read address by 3 bits, for use with fat pixel color expansion*/
|
|
#define HT_REG_C8_MOVSB (1 << 0)
|
|
#define HT_REG_C8_E256 (1 << 4)
|
|
#define HT_REG_C8_XLAM (1 << 6)
|
|
|
|
#define HT_REG_CD_P8PCEXP (1 << 0)
|
|
#define HT_REG_CD_FP8PCEXP (1 << 1)
|
|
#define HT_REG_CD_BMSKSL (3 << 2)
|
|
#define HT_REG_CD_RMWMDE (1 << 5)
|
|
/*Use GDC data rotate as offset when reading VRAM data into latches*/
|
|
#define HT_REG_CD_ASTODE (1 << 6)
|
|
#define HT_REG_CD_EXALU (1 << 7)
|
|
|
|
#define HT_REG_E0_SBAE (1 << 7)
|
|
|
|
#define HT_REG_F9_XPSEL (1 << 0)
|
|
|
|
/*Enables A[14:15] of VRAM address in chain-4 modes*/
|
|
#define HT_REG_FC_ECOLRE (1 << 2)
|
|
|
|
#define HT_REG_FE_FBRC (1 << 1)
|
|
#define HT_REG_FE_FBMC (3 << 2)
|
|
#define HT_REG_FE_FBRSL (3 << 4)
|
|
|
|
|
|
void ht216_remap(ht216_t *ht216);
|
|
|
|
void ht216_out(uint16_t addr, uint8_t val, void *p);
|
|
uint8_t ht216_in(uint16_t addr, void *p);
|
|
|
|
|
|
#define BIOS_G2_GC205_PATH "roms/video/video7/BIOS.BIN"
|
|
#define BIOS_VIDEO7_VGA_1024I_PATH "roms/video/video7/Video Seven VGA 1024i - BIOS - v2.19 - 435-0062-05 - U17 - 27C256.BIN"
|
|
#define BIOS_RADIUS_SVGA_MULTIVIEW_PATH "roms/video/video7/U18.BIN"
|
|
#define BIOS_HT216_32_PATH "roms/video/video7/HT21632.BIN"
|
|
|
|
static video_timings_t timing_v7vga_isa = {VIDEO_ISA, 3, 3, 6, 5, 5, 10};
|
|
static video_timings_t timing_v7vga_mca = {VIDEO_MCA, 4, 5, 10, 5, 5, 10};
|
|
static video_timings_t timing_v7vga_vlb = {VIDEO_BUS, 5, 5, 9, 20, 20, 30};
|
|
|
|
|
|
#ifdef ENABLE_HT216_LOG
|
|
int ht216_do_log = ENABLE_HT216_LOG;
|
|
|
|
|
|
static void
|
|
ht216_log(const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
|
|
if (ht216_do_log) {
|
|
va_start(ap, fmt);
|
|
pclog_ex(fmt, ap);
|
|
va_end(ap);
|
|
}
|
|
}
|
|
#else
|
|
#define ht216_log(fmt, ...)
|
|
#endif
|
|
|
|
/*Remap address for chain-4/doubleword style layout*/
|
|
static __inline uint32_t
|
|
dword_remap(svga_t *svga, uint32_t in_addr)
|
|
{
|
|
if (svga->packed_chain4)
|
|
return in_addr;
|
|
return ((in_addr & 0xfffc) << 2) | ((in_addr & 0x30000) >> 14) | (in_addr & ~0x3ffff);
|
|
}
|
|
|
|
static void
|
|
ht216_recalc_bank_regs(ht216_t *ht216, int mode)
|
|
{
|
|
svga_t *svga = &ht216->svga;
|
|
|
|
if (mode) {
|
|
ht216->read_bank_reg[0] = ht216->ht_regs[0xe8];
|
|
ht216->write_bank_reg[0] = ht216->ht_regs[0xe8];
|
|
ht216->read_bank_reg[1] = ht216->ht_regs[0xe9];
|
|
ht216->write_bank_reg[1] = ht216->ht_regs[0xe9];
|
|
} else {
|
|
ht216->read_bank_reg[0] = ((ht216->ht_regs[0xf6] & 0xc) << 4);
|
|
ht216->read_bank_reg[1] = ((ht216->ht_regs[0xf6] & 0xc) << 4);
|
|
ht216->write_bank_reg[0] = ((ht216->ht_regs[0xf6] & 0x3) << 6);
|
|
ht216->write_bank_reg[1] = ((ht216->ht_regs[0xf6] & 0x3) << 6);
|
|
|
|
if (svga->packed_chain4 || (ht216->ht_regs[0xfc] & HT_REG_FC_ECOLRE)) {
|
|
ht216->read_bank_reg[0] |= (ht216->misc & 0x20);
|
|
ht216->read_bank_reg[1] |= (ht216->misc & 0x20);
|
|
ht216->write_bank_reg[0] |= (ht216->misc & 0x20);
|
|
ht216->write_bank_reg[1] |= (ht216->misc & 0x20);
|
|
}
|
|
|
|
if (svga->packed_chain4 || ((ht216->ht_regs[0xfc] & 0x06) == 0x04)) {
|
|
ht216->read_bank_reg[0] |= ((ht216->ht_regs[0xf9] & 1) << 4);
|
|
ht216->read_bank_reg[1] |= ((ht216->ht_regs[0xf9] & 1) << 4);
|
|
ht216->write_bank_reg[0] |= ((ht216->ht_regs[0xf9] & 1) << 4);
|
|
ht216->write_bank_reg[1] |= ((ht216->ht_regs[0xf9] & 1) << 4);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
void
|
|
ht216_out(uint16_t addr, uint8_t val, void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
svga_t *svga = &ht216->svga;
|
|
uint8_t old;
|
|
|
|
ht216_log("ht216 %i out %04X %02X %04X:%04X\n", svga->miscout & 1, addr, val, CS, cpu_state.pc);
|
|
|
|
if (((addr & 0xfff0) == 0x3d0 || (addr & 0xfff0) == 0x3b0) && !(svga->miscout & 1))
|
|
addr ^= 0x60;
|
|
|
|
switch (addr) {
|
|
case 0x3c2:
|
|
/*Bit 17 of the display memory address, only active on odd/even modes, has no effect on graphics modes.*/
|
|
ht216->misc = val;
|
|
svga->miscout = val;
|
|
ht216_log("HT216 misc val = %02x, mode = 0, chain4 = %x\n", val, svga->chain4);
|
|
ht216_recalc_bank_regs(ht216, 0);
|
|
ht216_remap(ht216);
|
|
svga_recalctimings(svga);
|
|
break;
|
|
|
|
case 0x3c4:
|
|
svga->seqaddr = val;
|
|
break;
|
|
|
|
case 0x3c5:
|
|
if (svga->seqaddr == 4) {
|
|
svga->chain2_write = !(val & 4);
|
|
svga->chain4 = val & 8;
|
|
ht216_remap(ht216);
|
|
} else if (svga->seqaddr == 6) {
|
|
if (val == 0xea)
|
|
ht216->ext_reg_enable = 1;
|
|
else if (val == 0xae)
|
|
ht216->ext_reg_enable = 0;
|
|
#ifdef ENABLE_HT216_LOG
|
|
/* Functionality to output to the console a dump of all registers for debugging purposes. */
|
|
} else if (svga->seqaddr == 0x7f) {
|
|
ht216_log(" 8 | 0 1 2 3 4 5 6 7 8 9 A B C D E F\n");
|
|
ht216_log("----+-------------------------------------------------\n");
|
|
ht216_log(" 8 | %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n",
|
|
ht216->ht_regs[0x80], ht216->ht_regs[0x81], ht216->ht_regs[0x82], ht216->ht_regs[0x83],
|
|
ht216->ht_regs[0x84], ht216->ht_regs[0x85], ht216->ht_regs[0x86], ht216->ht_regs[0x87],
|
|
ht216->ht_regs[0x88], ht216->ht_regs[0x89], ht216->ht_regs[0x8a], ht216->ht_regs[0x8b],
|
|
ht216->ht_regs[0x8c], ht216->ht_regs[0x8d], ht216->ht_regs[0x8e], ht216->ht_regs[0x8f]);
|
|
ht216_log(" 9 | %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n",
|
|
ht216->ht_regs[0x90], ht216->ht_regs[0x91], ht216->ht_regs[0x92], ht216->ht_regs[0x93],
|
|
ht216->ht_regs[0x94], ht216->ht_regs[0x95], ht216->ht_regs[0x96], ht216->ht_regs[0x97],
|
|
ht216->ht_regs[0x98], ht216->ht_regs[0x99], ht216->ht_regs[0x9a], ht216->ht_regs[0x9b],
|
|
ht216->ht_regs[0x9c], ht216->ht_regs[0x9d], ht216->ht_regs[0x9e], ht216->ht_regs[0x9f]);
|
|
ht216_log(" A | %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n",
|
|
ht216->ht_regs[0xa0], ht216->ht_regs[0xa1], ht216->ht_regs[0xa2], ht216->ht_regs[0xa3],
|
|
ht216->ht_regs[0xa4], ht216->ht_regs[0xa5], ht216->ht_regs[0xa6], ht216->ht_regs[0xa7],
|
|
ht216->ht_regs[0xa8], ht216->ht_regs[0xa9], ht216->ht_regs[0xaa], ht216->ht_regs[0xab],
|
|
ht216->ht_regs[0xac], ht216->ht_regs[0xad], ht216->ht_regs[0xae], ht216->ht_regs[0xaf]);
|
|
ht216_log(" B | %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n",
|
|
ht216->ht_regs[0xb0], ht216->ht_regs[0xb1], ht216->ht_regs[0xb2], ht216->ht_regs[0xb3],
|
|
ht216->ht_regs[0xb4], ht216->ht_regs[0xb5], ht216->ht_regs[0xb6], ht216->ht_regs[0xb7],
|
|
ht216->ht_regs[0xb8], ht216->ht_regs[0xb9], ht216->ht_regs[0xba], ht216->ht_regs[0xbb],
|
|
ht216->ht_regs[0xbc], ht216->ht_regs[0xbd], ht216->ht_regs[0xbe], ht216->ht_regs[0xbf]);
|
|
ht216_log(" C | %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n",
|
|
ht216->ht_regs[0xc0], ht216->ht_regs[0xc1], ht216->ht_regs[0xc2], ht216->ht_regs[0xc3],
|
|
ht216->ht_regs[0xc4], ht216->ht_regs[0xc5], ht216->ht_regs[0xc6], ht216->ht_regs[0xc7],
|
|
ht216->ht_regs[0xc8], ht216->ht_regs[0xc9], ht216->ht_regs[0xca], ht216->ht_regs[0xcb],
|
|
ht216->ht_regs[0xcc], ht216->ht_regs[0xcd], ht216->ht_regs[0xce], ht216->ht_regs[0xcf]);
|
|
ht216_log(" D | %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n",
|
|
ht216->ht_regs[0xd0], ht216->ht_regs[0xd1], ht216->ht_regs[0xd2], ht216->ht_regs[0xd3],
|
|
ht216->ht_regs[0xd4], ht216->ht_regs[0xd5], ht216->ht_regs[0xd6], ht216->ht_regs[0xd7],
|
|
ht216->ht_regs[0xd8], ht216->ht_regs[0xd9], ht216->ht_regs[0xda], ht216->ht_regs[0xdb],
|
|
ht216->ht_regs[0xdc], ht216->ht_regs[0xdd], ht216->ht_regs[0xde], ht216->ht_regs[0xdf]);
|
|
ht216_log(" E | %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n",
|
|
ht216->ht_regs[0xe0], ht216->ht_regs[0xe1], ht216->ht_regs[0xe2], ht216->ht_regs[0xe3],
|
|
ht216->ht_regs[0xe4], ht216->ht_regs[0xe5], ht216->ht_regs[0xe6], ht216->ht_regs[0xe7],
|
|
ht216->ht_regs[0xe8], ht216->ht_regs[0xe9], ht216->ht_regs[0xea], ht216->ht_regs[0xeb],
|
|
ht216->ht_regs[0xec], ht216->ht_regs[0xed], ht216->ht_regs[0xee], ht216->ht_regs[0xef]);
|
|
ht216_log(" F | %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n",
|
|
ht216->ht_regs[0xf0], ht216->ht_regs[0xf1], ht216->ht_regs[0xf2], ht216->ht_regs[0xf3],
|
|
ht216->ht_regs[0xf4], ht216->ht_regs[0xf5], ht216->ht_regs[0xf6], ht216->ht_regs[0xf7],
|
|
ht216->ht_regs[0xf8], ht216->ht_regs[0xf9], ht216->ht_regs[0xfa], ht216->ht_regs[0xfb],
|
|
ht216->ht_regs[0xfc], ht216->ht_regs[0xfd], ht216->ht_regs[0xfe], ht216->ht_regs[0xff]);
|
|
return;
|
|
#endif
|
|
} else if (svga->seqaddr >= 0x80 && ht216->ext_reg_enable) {
|
|
old = ht216->ht_regs[svga->seqaddr & 0xff];
|
|
ht216->ht_regs[svga->seqaddr & 0xff] = val;
|
|
|
|
switch (svga->seqaddr & 0xff) {
|
|
case 0x83:
|
|
svga->attraddr = val & 0x1f;
|
|
svga->attrff = !!(val & 0x80);
|
|
break;
|
|
|
|
case 0x94:
|
|
case 0xff:
|
|
svga->hwcursor.addr = ((ht216->ht_regs[0x94] << 6) | 0xc000 | ((ht216->ht_regs[0xff] & 0x60) << 11)) << 2;
|
|
svga->hwcursor.addr &= svga->vram_mask;
|
|
if (svga->crtc[0x17] == 0xeb) /*Looks like that 1024x768 mono mode expects 512K of video memory*/
|
|
svga->hwcursor.addr += 0x40000;
|
|
break;
|
|
case 0x9c: case 0x9d:
|
|
svga->hwcursor.x = ht216->ht_regs[0x9d] | ((ht216->ht_regs[0x9c] & 7) << 8);
|
|
break;
|
|
case 0x9e: case 0x9f:
|
|
svga->hwcursor.y = ht216->ht_regs[0x9f] | ((ht216->ht_regs[0x9e] & 3) << 8);
|
|
break;
|
|
|
|
case 0xa0:
|
|
svga->latch.b[0] = val;
|
|
break;
|
|
case 0xa1:
|
|
svga->latch.b[1] = val;
|
|
break;
|
|
case 0xa2:
|
|
svga->latch.b[2] = val;
|
|
break;
|
|
case 0xa3:
|
|
svga->latch.b[3] = val;
|
|
break;
|
|
|
|
case 0xa4:
|
|
case 0xf8:
|
|
svga->fullchange = changeframecount;
|
|
svga_recalctimings(svga);
|
|
break;
|
|
|
|
case 0xa5:
|
|
svga->hwcursor.ena = !!(val & 0x80);
|
|
break;
|
|
|
|
case 0xc0:
|
|
break;
|
|
|
|
case 0xc1:
|
|
break;
|
|
|
|
case 0xc8:
|
|
if ((old ^ val) & HT_REG_C8_E256) {
|
|
svga->fullchange = changeframecount;
|
|
svga_recalctimings(svga);
|
|
}
|
|
ht216_remap(ht216);
|
|
break;
|
|
|
|
case 0xc9: case 0xcf:
|
|
ht216_remap(ht216);
|
|
break;
|
|
|
|
case 0xe0:
|
|
svga->adv_flags &= ~FLAG_RAMDAC_SHIFT;
|
|
if (val & 0x04)
|
|
svga->adv_flags |= FLAG_RAMDAC_SHIFT;
|
|
/* FALLTHROUGH */
|
|
/*Bank registers*/
|
|
case 0xe8: case 0xe9:
|
|
ht216_log("HT216 reg 0x%02x write = %02x, mode = 1, chain4 = %x\n", svga->seqaddr & 0xff, val, svga->chain4);
|
|
ht216_recalc_bank_regs(ht216, 1);
|
|
ht216_remap(ht216);
|
|
break;
|
|
|
|
case 0xec:
|
|
ht216->fg_latch[0] = val;
|
|
break;
|
|
case 0xed:
|
|
ht216->fg_latch[1] = val;
|
|
break;
|
|
case 0xee:
|
|
ht216->fg_latch[2] = val;
|
|
break;
|
|
case 0xef:
|
|
ht216->fg_latch[3] = val;
|
|
break;
|
|
|
|
case 0xf0:
|
|
ht216->fg_latch[ht216->fg_plane_sel] = val;
|
|
ht216->fg_plane_sel = (ht216->fg_plane_sel + 1) & 3;
|
|
break;
|
|
|
|
case 0xf1:
|
|
ht216->bg_plane_sel = val & 3;
|
|
ht216->fg_plane_sel = (val & 0x30) >> 4;
|
|
break;
|
|
|
|
case 0xf2:
|
|
svga->latch.b[ht216->bg_plane_sel] = val;
|
|
ht216->bg_plane_sel = (ht216->bg_plane_sel + 1) & 3;
|
|
break;
|
|
|
|
case 0xf6:
|
|
/*Bits 18 and 19 of the display memory address*/
|
|
ht216_log("HT216 reg 0xf6 write = %02x, mode = 0, chain4 = %x, vram mask = %08x, cr17 = %02x\n", val, svga->chain4, svga->vram_display_mask, svga->crtc[0x17]);
|
|
ht216_recalc_bank_regs(ht216, 0);
|
|
ht216_remap(ht216);
|
|
svga->fullchange = changeframecount;
|
|
svga_recalctimings(svga);
|
|
break;
|
|
|
|
case 0xf9:
|
|
/*Bit 16 of the display memory address, only active when in chain4 mode and 256 color mode.*/
|
|
ht216_log("HT216 reg 0xf9 write = %02x, mode = 0, chain4 = %x\n", val & HT_REG_F9_XPSEL, svga->chain4);
|
|
ht216_recalc_bank_regs(ht216, 0);
|
|
ht216_remap(ht216);
|
|
break;
|
|
|
|
case 0xfc:
|
|
ht216_log("HT216 reg 0xfc write = %02x, mode = 0, chain4 = %x, bit 7 = %02x, packedchain = %02x\n", val, svga->chain4, val & 0x80, val & 0x20);
|
|
svga->packed_chain4 = !!(val & 0x20);
|
|
ht216_recalc_bank_regs(ht216, 0);
|
|
ht216_remap(ht216);
|
|
svga->fullchange = changeframecount;
|
|
svga_recalctimings(svga);
|
|
break;
|
|
}
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case 0x3c6: case 0x3c7: case 0x3c8: case 0x3c9:
|
|
if (ht216->id == 0x7152)
|
|
sc1148x_ramdac_out(addr, 0, val, svga->ramdac, svga);
|
|
else
|
|
svga_out(addr, val, svga);
|
|
return;
|
|
|
|
case 0x3cb:
|
|
if (ht216->id == 0x7152) {
|
|
ht216->reg_3cb = val;
|
|
svga_set_ramdac_type(svga, (val & 0x20) ? RAMDAC_6BIT : RAMDAC_8BIT);
|
|
}
|
|
break;
|
|
|
|
case 0x3cf:
|
|
if (svga->gdcaddr == 5) {
|
|
svga->chain2_read = val & 0x10;
|
|
ht216_remap(ht216);
|
|
} else if (svga->gdcaddr == 6) {
|
|
if (val & 8)
|
|
svga->banked_mask = 0x7fff;
|
|
else
|
|
svga->banked_mask = 0xffff;
|
|
}
|
|
|
|
if (svga->gdcaddr <= 8) {
|
|
svga->fast = (svga->gdcreg[8] == 0xff && !(svga->gdcreg[3] & 0x18) &&
|
|
!svga->gdcreg[1]) && svga->chain4 && svga->packed_chain4;
|
|
}
|
|
break;
|
|
|
|
case 0x3D4:
|
|
svga->crtcreg = val & 0x3f;
|
|
return;
|
|
case 0x3D5:
|
|
if ((svga->crtcreg < 7) && (svga->crtc[0x11] & 0x80))
|
|
return;
|
|
if ((svga->crtcreg == 7) && (svga->crtc[0x11] & 0x80))
|
|
val = (svga->crtc[7] & ~0x10) | (val & 0x10);
|
|
|
|
old = svga->crtc[svga->crtcreg];
|
|
svga->crtc[svga->crtcreg] = val;
|
|
|
|
if (old != val) {
|
|
if (svga->crtcreg < 0xe || svga->crtcreg > 0x10) {
|
|
if ((svga->crtcreg == 0xc) || (svga->crtcreg == 0xd)) {
|
|
svga->fullchange = 3;
|
|
svga->ma_latch = ((svga->crtc[0xc] << 8) | svga->crtc[0xd]) + ((svga->crtc[8] & 0x60) >> 5);
|
|
} else {
|
|
svga->fullchange = changeframecount;
|
|
svga_recalctimings(svga);
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 0x46e8:
|
|
if ((ht216->id == 0x7152) && ht216->isabus)
|
|
io_removehandler(0x0105, 0x0001, ht216_in, NULL, NULL, ht216_out, NULL, NULL, ht216);
|
|
io_removehandler(0x03c0, 0x0020, ht216_in, NULL, NULL, ht216_out, NULL, NULL, ht216);
|
|
mem_mapping_disable(&svga->mapping);
|
|
mem_mapping_disable(&ht216->linear_mapping);
|
|
if (val & 8) {
|
|
if ((ht216->id == 0x7152) && ht216->isabus)
|
|
io_sethandler(0x0105, 0x0001, ht216_in, NULL, NULL, ht216_out, NULL, NULL, ht216);
|
|
io_sethandler(0x03c0, 0x0020, ht216_in, NULL, NULL, ht216_out, NULL, NULL, ht216);
|
|
mem_mapping_enable(&svga->mapping);
|
|
ht216_remap(ht216);
|
|
}
|
|
break;
|
|
}
|
|
|
|
svga_out(addr, val, svga);
|
|
}
|
|
|
|
|
|
uint8_t
|
|
ht216_in(uint16_t addr, void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
svga_t *svga = &ht216->svga;
|
|
uint8_t ret = 0xff;
|
|
|
|
if (((addr & 0xfff0) == 0x3d0 || (addr & 0xfff0) == 0x3b0) && !(svga->miscout & 1))
|
|
addr ^= 0x60;
|
|
|
|
if ((ht216->id == 0x7152) && ht216->isabus) {
|
|
if (addr == 0x105)
|
|
return ht216->extensions;
|
|
}
|
|
|
|
switch (addr) {
|
|
case 0x3c4:
|
|
return svga->seqaddr;
|
|
|
|
case 0x3c5:
|
|
if (svga->seqaddr == 6)
|
|
return ht216->ext_reg_enable;
|
|
else if (svga->seqaddr >= 0x80) {
|
|
if (ht216->ext_reg_enable) {
|
|
ret = ht216->ht_regs[svga->seqaddr & 0xff];
|
|
|
|
switch (svga->seqaddr & 0xff) {
|
|
case 0x83:
|
|
if (svga->attrff)
|
|
ret = svga->attraddr | 0x80;
|
|
else
|
|
ret = svga->attraddr;
|
|
break;
|
|
|
|
case 0x8e:
|
|
ret = ht216->id & 0xff;
|
|
break;
|
|
case 0x8f:
|
|
ret = (ht216->id >> 8) & 0xff;
|
|
break;
|
|
|
|
case 0xa0:
|
|
ret = svga->latch.b[0];
|
|
break;
|
|
case 0xa1:
|
|
ret = svga->latch.b[1];
|
|
break;
|
|
case 0xa2:
|
|
ret = svga->latch.b[2];
|
|
break;
|
|
case 0xa3:
|
|
ret = svga->latch.b[3];
|
|
break;
|
|
|
|
case 0xf0:
|
|
ret = ht216->fg_latch[ht216->fg_plane_sel];
|
|
ht216->fg_plane_sel = 0;
|
|
break;
|
|
|
|
case 0xf2:
|
|
ret = svga->latch.b[ht216->bg_plane_sel];
|
|
ht216->bg_plane_sel = 0;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
} else
|
|
return 0xff;
|
|
}
|
|
break;
|
|
|
|
case 0x3c6: case 0x3c7: case 0x3c8: case 0x3c9:
|
|
if (ht216->id == 0x7152)
|
|
return sc1148x_ramdac_in(addr, 0, svga->ramdac, svga);
|
|
return svga_in(addr, svga);
|
|
|
|
case 0x3cb:
|
|
if (ht216->id == 0x7152)
|
|
return ht216->reg_3cb;
|
|
break;
|
|
|
|
case 0x3cc:
|
|
return svga->miscout;
|
|
|
|
case 0x3D4:
|
|
return svga->crtcreg;
|
|
case 0x3D5:
|
|
if (svga->crtcreg == 0x1f)
|
|
return svga->crtc[0xc] ^ 0xea;
|
|
return svga->crtc[svga->crtcreg];
|
|
}
|
|
|
|
return svga_in(addr, svga);
|
|
}
|
|
|
|
void
|
|
ht216_remap(ht216_t *ht216)
|
|
{
|
|
svga_t *svga = &ht216->svga;
|
|
|
|
mem_mapping_disable(&ht216->linear_mapping);
|
|
if (ht216->ht_regs[0xc8] & HT_REG_C8_XLAM) {
|
|
/*Linear mapping enabled*/
|
|
ht216_log("Linear mapping enabled\n");
|
|
ht216->linear_base = ((ht216->ht_regs[0xc9] & 0xf) << 20) | (ht216->ht_regs[0xcf] << 24);
|
|
mem_mapping_disable(&svga->mapping);
|
|
mem_mapping_set_addr(&ht216->linear_mapping, ht216->linear_base, 0x100000);
|
|
}
|
|
|
|
ht216->read_banks[0] = ht216->read_bank_reg[0] << 12;
|
|
ht216->write_banks[0] = ht216->write_bank_reg[0] << 12;
|
|
|
|
/* Split bank: two banks used */
|
|
if (ht216->ht_regs[0xe0] & HT_REG_E0_SBAE) {
|
|
ht216->read_banks[1] = ht216->read_bank_reg[1] << 12;
|
|
ht216->write_banks[1] = ht216->write_bank_reg[1] << 12;
|
|
}
|
|
|
|
if (!svga->chain4) {
|
|
ht216->read_banks[0] = ((ht216->read_banks[0] & 0xc0000) >> 2) | (ht216->read_banks[0] & 0xffff);
|
|
ht216->read_banks[1] = ((ht216->read_banks[1] & 0xc0000) >> 2) | (ht216->read_banks[1] & 0xffff);
|
|
ht216->write_banks[0] = ((ht216->write_banks[0] & 0xc0000) >> 2) | (ht216->write_banks[0] & 0xffff);
|
|
ht216->write_banks[1] = ((ht216->write_banks[1] & 0xc0000) >> 2) | (ht216->write_banks[1] & 0xffff);
|
|
}
|
|
|
|
if (!(ht216->ht_regs[0xe0] & HT_REG_E0_SBAE)) {
|
|
ht216->read_banks[1] = ht216->read_banks[0] + 0x8000;
|
|
ht216->write_banks[1] = ht216->write_banks[0] + 0x8000;
|
|
}
|
|
|
|
#ifdef ENABLE_HT216_LOG
|
|
ht216_log("Registers: %02X, %02X, %02X, %02X, %02X\n", ht216->misc, ht216->ht_regs[0xe8], ht216->ht_regs[0xe9],
|
|
ht216->ht_regs[0xf6], ht216->ht_regs[0xf9]);
|
|
ht216_log("Banks: %08X, %08X, %08X, %08X\n", ht216->read_banks[0], ht216->read_banks[1],
|
|
ht216->write_banks[0], ht216->write_banks[1]);
|
|
#endif
|
|
}
|
|
|
|
|
|
void
|
|
ht216_recalctimings(svga_t *svga)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)svga->p;
|
|
int high_res_256 = 0;
|
|
|
|
switch ((((((svga->miscout >> 2) & 3) || ((ht216->ht_regs[0xa4] >> 2) & 3)) |
|
|
((ht216->ht_regs[0xa4] >> 2) & 4)) || ((ht216->ht_regs[0xf8] >> 5) & 0x0f)) |
|
|
((ht216->ht_regs[0xf8] << 1) & 8)) {
|
|
case 0:
|
|
case 1:
|
|
break;
|
|
case 4:
|
|
svga->clock = (cpuclock * (double)(1ull << 32)) / 50350000.0;
|
|
break;
|
|
case 5:
|
|
svga->clock = (cpuclock * (double)(1ull << 32)) / 65000000.0;
|
|
break;
|
|
case 7:
|
|
svga->clock = (cpuclock * (double)(1ull << 32)) / 40000000.0;
|
|
break;
|
|
default:
|
|
svga->clock = (cpuclock * (double)(1ull << 32)) / 36000000.0;
|
|
break;
|
|
}
|
|
|
|
svga->ma_latch |= ((ht216->ht_regs[0xf6] & 0x30) << 12);
|
|
|
|
svga->interlace = ht216->ht_regs[0xe0] & 1;
|
|
|
|
if (svga->interlace)
|
|
high_res_256 = (svga->htotal * 8) > (svga->vtotal * 4);
|
|
else
|
|
high_res_256 = (svga->htotal * 8) > (svga->vtotal * 2);
|
|
|
|
ht216->adjust_cursor = 0;
|
|
|
|
if (!svga->scrblank && svga->attr_palette_enable) {
|
|
if (!(svga->gdcreg[6] & 1) && !(svga->attrregs[0x10] & 1)) { /*Text mode*/
|
|
if (svga->seqregs[1] & 8) /*40 column*/ {
|
|
svga->render = svga_render_text_40;
|
|
} else {
|
|
svga->render = svga_render_text_80;
|
|
}
|
|
} else {
|
|
if (svga->crtc[0x17] == 0xeb) {
|
|
svga->rowoffset <<= 1;
|
|
svga->render = svga_render_2bpp_headland_highres;
|
|
}
|
|
|
|
if (svga->bpp == 8) {
|
|
ht216_log("regC8 = %02x, gdcreg5 bit 6 = %02x, no lowres = %02x, regf8 bit 7 = %02x, regfc = %02x\n", ht216->ht_regs[0xc8] & HT_REG_C8_E256, svga->gdcreg[5] & 0x40, !svga->lowres, ht216->ht_regs[0xf6] & 0x80, ht216->ht_regs[0xfc] & HT_REG_FC_ECOLRE);
|
|
if (((ht216->ht_regs[0xc8] & HT_REG_C8_E256) || (svga->gdcreg[5] & 0x40)) && (!svga->lowres || (ht216->ht_regs[0xf6] & 0x80))) {
|
|
if (high_res_256) {
|
|
svga->hdisp >>= 1;
|
|
ht216->adjust_cursor = 1;
|
|
}
|
|
svga->render = svga_render_8bpp_highres;
|
|
} else if (svga->lowres) {
|
|
if (high_res_256) {
|
|
svga->hdisp >>= 1;
|
|
ht216->adjust_cursor = 1;
|
|
svga->render = svga_render_8bpp_highres;
|
|
} else {
|
|
ht216_log("8bpp low, packed = %02x, chain4 = %02x\n", svga->packed_chain4, svga->chain4);
|
|
svga->render = svga_render_8bpp_lowres;
|
|
}
|
|
} else if (ht216->ht_regs[0xfc] & HT_REG_FC_ECOLRE) {
|
|
if (ht216->id == 0x7152) {
|
|
svga->hdisp = svga->crtc[1] - ((svga->crtc[5] & 0x60) >> 5);
|
|
if (!(svga->crtc[1] & 1))
|
|
svga->hdisp--;
|
|
svga->hdisp++;
|
|
svga->hdisp *= (svga->seqregs[1] & 8) ? 16 : 8;
|
|
svga->rowoffset <<= 1;
|
|
if ((svga->crtc[0x17] & 0x60) == 0x20) /*Would result in a garbled screen with trailing cursor glitches*/
|
|
svga->crtc[0x17] |= 0x40;
|
|
}
|
|
svga->render = svga_render_8bpp_highres;
|
|
}
|
|
} else if (svga->bpp == 15) {
|
|
svga->rowoffset <<= 1;
|
|
svga->hdisp >>= 1;
|
|
if ((svga->crtc[0x17] & 0x60) == 0x20) /*Would result in a garbled screen with trailing cursor glitches*/
|
|
svga->crtc[0x17] |= 0x40;
|
|
svga->render = svga_render_15bpp_highres;
|
|
}
|
|
}
|
|
}
|
|
|
|
svga->ma_latch |= ((ht216->ht_regs[0xf6] & 0x30) << 14);
|
|
|
|
if (svga->crtc[0x17] == 0xeb) /*Looks like 1024x768 mono mode expects 512K of video memory*/
|
|
svga->vram_display_mask = 0x7ffff;
|
|
else
|
|
svga->vram_display_mask = (ht216->ht_regs[0xf6] & 0x40) ? ht216->vram_mask : 0x3ffff;
|
|
}
|
|
|
|
|
|
static void
|
|
ht216_hwcursor_draw(svga_t *svga, int displine)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)svga->p;
|
|
int x, shift = (ht216->adjust_cursor ? 2 : 1);
|
|
uint32_t dat[2];
|
|
int offset = svga->hwcursor_latch.x + svga->hwcursor_latch.xoff;
|
|
int width = (ht216->adjust_cursor ? 16 : 32);
|
|
|
|
if (ht216->adjust_cursor)
|
|
offset >>= 1;
|
|
|
|
if (svga->interlace && svga->hwcursor_oddeven)
|
|
svga->hwcursor_latch.addr += 4;
|
|
|
|
dat[0] = (svga->vram[svga->hwcursor_latch.addr] << 24) |
|
|
(svga->vram[svga->hwcursor_latch.addr+1] << 16) |
|
|
(svga->vram[svga->hwcursor_latch.addr+2] << 8) |
|
|
svga->vram[svga->hwcursor_latch.addr+3];
|
|
dat[1] = (svga->vram[svga->hwcursor_latch.addr+128] << 24) |
|
|
(svga->vram[svga->hwcursor_latch.addr+128+1] << 16) |
|
|
(svga->vram[svga->hwcursor_latch.addr+128+2] << 8) |
|
|
svga->vram[svga->hwcursor_latch.addr+128+3];
|
|
|
|
for (x = 0; x < width; x++) {
|
|
if (!(dat[0] & 0x80000000))
|
|
((uint32_t *)buffer32->line[displine])[svga->x_add + offset + x] = 0;
|
|
if (dat[1] & 0x80000000)
|
|
((uint32_t *)buffer32->line[displine])[svga->x_add + offset + x] ^= 0xffffff;
|
|
|
|
dat[0] <<= shift;
|
|
dat[1] <<= shift;
|
|
}
|
|
|
|
svga->hwcursor_latch.addr += 4;
|
|
if (svga->interlace && !svga->hwcursor_oddeven)
|
|
svga->hwcursor_latch.addr += 4;
|
|
}
|
|
|
|
|
|
static __inline uint8_t
|
|
extalu(int op, uint8_t input_a, uint8_t input_b)
|
|
{
|
|
uint8_t val;
|
|
|
|
switch (op) {
|
|
case 0x0: val = 0; break;
|
|
case 0x1: val = ~(input_a | input_b); break;
|
|
case 0x2: val = input_a & ~input_b; break;
|
|
case 0x3: val = ~input_b; break;
|
|
case 0x4: val = ~input_a & input_b; break;
|
|
case 0x5: val = ~input_a; break;
|
|
case 0x6: val = input_a ^ input_b; break;
|
|
case 0x7: val = ~(input_a & input_b); break;
|
|
case 0x8: val = input_a & input_b; break;
|
|
case 0x9: val = ~(input_a ^ input_b); break;
|
|
case 0xa: val = input_a; break;
|
|
case 0xb: val = input_a | ~input_b; break;
|
|
case 0xc: val = input_b; break;
|
|
case 0xd: val = ~input_a | input_b; break;
|
|
case 0xe: val = input_a | input_b; break;
|
|
case 0xf: default: val = 0xff; break;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static void
|
|
ht216_dm_write(ht216_t *ht216, uint32_t addr, uint8_t cpu_dat, uint8_t cpu_dat_unexpanded)
|
|
{
|
|
svga_t *svga = &ht216->svga;
|
|
int writemask2 = svga->writemask, reset_wm = 0;
|
|
latch_t vall;
|
|
uint8_t i, wm = svga->writemask;
|
|
uint8_t count = 4, fg_data[8] = {0, 0, 0, 0, 0, 0, 0, 0};
|
|
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_P8PCEXP)
|
|
writemask2 = svga->seqregs[2];
|
|
|
|
if (!(svga->gdcreg[6] & 1))
|
|
svga->fullchange = 2;
|
|
|
|
if (svga->chain4) {
|
|
writemask2 = 1 << (addr & 3);
|
|
addr = dword_remap(svga, addr) & ~3;
|
|
} else if (svga->chain2_write && (svga->crtc[0x17] != 0xeb)) {
|
|
writemask2 &= ~0xa;
|
|
if (addr & 1)
|
|
writemask2 <<= 1;
|
|
addr &= ~1;
|
|
addr <<= 2;
|
|
} else
|
|
addr <<= 2;
|
|
|
|
if (addr >= svga->vram_max)
|
|
return;
|
|
|
|
svga->changedvram[addr >> 12] = changeframecount;
|
|
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_P8PCEXP)
|
|
count = 8;
|
|
|
|
switch (ht216->ht_regs[0xfe] & HT_REG_FE_FBMC) {
|
|
case 0x00:
|
|
for (i = 0; i < count; i++)
|
|
fg_data[i] = cpu_dat;
|
|
break;
|
|
case 0x04:
|
|
if (ht216->ht_regs[0xfe] & HT_REG_FE_FBRC) {
|
|
for (i = 0; i < count; i++) {
|
|
if (ht216->ht_regs[0xfa] & (1 << i))
|
|
fg_data[i] = cpu_dat_unexpanded;
|
|
else if (ht216->ht_regs[0xfb] & (1 << i))
|
|
fg_data[i] = 0xff - cpu_dat_unexpanded;
|
|
}
|
|
} else {
|
|
for (i = 0; i < count; i++) {
|
|
if (ht216->ht_regs[0xfa] & (1 << i))
|
|
fg_data[i] = ht216->ht_regs[0xf5];
|
|
else if (ht216->ht_regs[0xfb] & (1 << i))
|
|
fg_data[i] = 0xff - ht216->ht_regs[0xf5];
|
|
}
|
|
}
|
|
break;
|
|
case 0x08:
|
|
case 0x0c:
|
|
for (i = 0; i < count; i++)
|
|
fg_data[i] = ht216->fg_latch[i];
|
|
break;
|
|
}
|
|
|
|
switch (svga->writemode) {
|
|
case 0:
|
|
if ((svga->gdcreg[8] == 0xff) && !(svga->gdcreg[3] & 0x18) && (!svga->gdcreg[1] || svga->set_reset_disabled)) {
|
|
for (i = 0; i < count; i++) {
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_P8PCEXP) {
|
|
if (writemask2 & (0x80 >> i))
|
|
svga->vram[addr | i] = fg_data[i];
|
|
} else {
|
|
if (writemask2 & (1 << i))
|
|
svga->vram[addr | i] = fg_data[i];
|
|
}
|
|
}
|
|
return;
|
|
} else {
|
|
for (i = 0; i < count; i++) {
|
|
if (svga->gdcreg[1] & (1 << i))
|
|
vall.b[i] = !!(svga->gdcreg[0] & (1 << i)) * 0xff;
|
|
else
|
|
vall.b[i] = fg_data[i];
|
|
}
|
|
}
|
|
break;
|
|
case 1:
|
|
for (i = 0; i < count; i++) {
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_P8PCEXP) {
|
|
if (writemask2 & (0x80 >> i))
|
|
svga->vram[addr | i] = svga->latch.b[i];
|
|
} else {
|
|
if (writemask2 & (1 << i))
|
|
svga->vram[addr | i] = svga->latch.b[i];
|
|
}
|
|
}
|
|
return;
|
|
case 2:
|
|
for (i = 0; i < count; i++)
|
|
vall.b[i] = !!(cpu_dat & (1 << i)) * 0xff;
|
|
|
|
if (!(svga->gdcreg[3] & 0x18) && (!svga->gdcreg[1] || svga->set_reset_disabled)) {
|
|
for (i = 0; i < count; i++) {
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_P8PCEXP) {
|
|
if (writemask2 & (0x80 >> i))
|
|
svga->vram[addr | i] = (vall.b[i] & svga->gdcreg[8]) | (svga->latch.b[i] & ~svga->gdcreg[8]);
|
|
} else {
|
|
if (writemask2 & (1 << i))
|
|
svga->vram[addr | i] = (vall.b[i] & svga->gdcreg[8]) | (svga->latch.b[i] & ~svga->gdcreg[8]);
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
break;
|
|
case 3:
|
|
wm = svga->gdcreg[8];
|
|
svga->gdcreg[8] &= cpu_dat;
|
|
|
|
for (i = 0; i < count; i++)
|
|
vall.b[i] = !!(svga->gdcreg[0] & (1 << i)) * 0xff;
|
|
|
|
reset_wm = 1;
|
|
break;
|
|
}
|
|
|
|
switch (svga->gdcreg[3] & 0x18) {
|
|
case 0x00: /* Set */
|
|
for (i = 0; i < count; i++) {
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_P8PCEXP) {
|
|
if (writemask2 & (0x80 >> i))
|
|
svga->vram[addr | i] = (vall.b[i] & svga->gdcreg[8]) | (svga->latch.b[i] & ~svga->gdcreg[8]);
|
|
} else {
|
|
if (writemask2 & (1 << i))
|
|
svga->vram[addr | i] = (vall.b[i] & svga->gdcreg[8]) | (svga->latch.b[i] & ~svga->gdcreg[8]);
|
|
}
|
|
}
|
|
break;
|
|
case 0x08: /* AND */
|
|
for (i = 0; i < count; i++) {
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_P8PCEXP) {
|
|
if (writemask2 & (0x80 >> i))
|
|
svga->vram[addr | i] = (vall.b[i] | ~svga->gdcreg[8]) & svga->latch.b[i];
|
|
} else {
|
|
if (writemask2 & (1 << i))
|
|
svga->vram[addr | i] = (vall.b[i] | ~svga->gdcreg[8]) & svga->latch.b[i];
|
|
}
|
|
}
|
|
break;
|
|
case 0x10: /* OR */
|
|
for (i = 0; i < count; i++) {
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_P8PCEXP) {
|
|
if (writemask2 & (0x80 >> i))
|
|
svga->vram[addr | i] = (vall.b[i] & svga->gdcreg[8]) | svga->latch.b[i];
|
|
} else {
|
|
if (writemask2 & (1 << i))
|
|
svga->vram[addr | i] = (vall.b[i] & svga->gdcreg[8]) | svga->latch.b[i];
|
|
}
|
|
}
|
|
break;
|
|
case 0x18: /* XOR */
|
|
for (i = 0; i < count; i++) {
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_P8PCEXP) {
|
|
if (writemask2 & (0x80 >> i))
|
|
svga->vram[addr | i] = (vall.b[i] & svga->gdcreg[8]) ^ svga->latch.b[i];
|
|
} else {
|
|
if (writemask2 & (1 << i))
|
|
svga->vram[addr | i] = (vall.b[i] & svga->gdcreg[8]) ^ svga->latch.b[i];
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (reset_wm)
|
|
svga->gdcreg[8] = wm;
|
|
}
|
|
|
|
|
|
static void
|
|
ht216_dm_extalu_write(ht216_t *ht216, uint32_t addr, uint8_t cpu_dat, uint8_t bit_mask, uint8_t cpu_dat_unexpanded, uint8_t rop_select)
|
|
{
|
|
/*Input B = CD.5
|
|
Input A = FE[3:2]
|
|
00 = Set/Reset output mode
|
|
output = CPU-side ALU input
|
|
01 = Solid fg/bg mode (3C4:FA/FB)
|
|
Bit mask = 3CF.F5 or CPU byte
|
|
10 = Dithered fg (3CF:EC-EF)
|
|
11 = RMW (dest data) (set if CD.5 = 1)
|
|
F/B ROP select = FE[5:4]
|
|
00 = CPU byte
|
|
01 = Bit mask (3CF:8)
|
|
1x = (3C4:F5)*/
|
|
svga_t *svga = &ht216->svga;
|
|
uint8_t input_a = 0, input_b = 0;
|
|
uint8_t fg, bg;
|
|
uint8_t output;
|
|
uint32_t remapped_addr = dword_remap(svga, addr);
|
|
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_RMWMDE) /*RMW*/
|
|
input_b = svga->vram[remapped_addr];
|
|
else
|
|
input_b = ht216->bg_latch[addr & 7];
|
|
|
|
switch (ht216->ht_regs[0xfe] & HT_REG_FE_FBMC) {
|
|
case 0x00:
|
|
input_a = cpu_dat;
|
|
break;
|
|
case 0x04:
|
|
if (ht216->ht_regs[0xfe] & HT_REG_FE_FBRC)
|
|
input_a = (cpu_dat_unexpanded & (1 << ((addr & 7) ^ 7))) ? ht216->ht_regs[0xfa] : ht216->ht_regs[0xfb];
|
|
else
|
|
input_a = (ht216->ht_regs[0xf5] & (1 << ((addr & 7) ^ 7))) ? ht216->ht_regs[0xfa] : ht216->ht_regs[0xfb];
|
|
break;
|
|
case 0x08:
|
|
input_a = ht216->fg_latch[addr & 3];
|
|
break;
|
|
case 0x0c:
|
|
input_a = ht216->bg_latch[addr & 7];
|
|
break;
|
|
}
|
|
|
|
fg = extalu(ht216->ht_regs[0xce] >> 4, input_a, input_b);
|
|
bg = extalu(ht216->ht_regs[0xce] & 0xf, input_a, input_b);
|
|
output = (fg & rop_select) | (bg & ~rop_select);
|
|
svga->vram[addr] = (svga->vram[remapped_addr] & ~bit_mask) | (output & bit_mask);
|
|
svga->changedvram[remapped_addr >> 12] = changeframecount;
|
|
}
|
|
|
|
static void
|
|
ht216_dm_masked_write(ht216_t *ht216, uint32_t addr, uint8_t val, uint8_t bit_mask)
|
|
{
|
|
svga_t *svga = &ht216->svga;
|
|
int writemask2 = svga->writemask;
|
|
uint8_t count = 4, i;
|
|
uint8_t full_mask = 0x0f;
|
|
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_P8PCEXP)
|
|
writemask2 = svga->seqregs[2];
|
|
|
|
if (!(svga->gdcreg[6] & 1))
|
|
svga->fullchange = 2;
|
|
|
|
if (svga->chain4) {
|
|
writemask2 = 1 << (addr & 3);
|
|
addr = dword_remap(svga, addr) & ~3;
|
|
} else if (svga->chain2_write) {
|
|
writemask2 &= ~0xa;
|
|
if (addr & 1)
|
|
writemask2 <<= 1;
|
|
addr &= ~1;
|
|
addr <<= 2;
|
|
} else
|
|
addr <<= 2;
|
|
|
|
if (addr >= svga->vram_max)
|
|
return;
|
|
|
|
addr &= svga->decode_mask;
|
|
|
|
if (addr >= svga->vram_max)
|
|
return;
|
|
|
|
addr &= svga->vram_mask;
|
|
|
|
svga->changedvram[addr >> 12] = changeframecount;
|
|
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_P8PCEXP) {
|
|
count = 8;
|
|
full_mask = 0xff;
|
|
}
|
|
|
|
if (bit_mask == 0xff) {
|
|
for (i = 0; i < count; i++) {
|
|
if (writemask2 & (1 << i))
|
|
svga->vram[addr | i] = val;
|
|
}
|
|
} else {
|
|
if (writemask2 == full_mask) {
|
|
for (i = 0; i < count; i++)
|
|
svga->vram[addr | i] = (svga->latch.b[i] & bit_mask) | (svga->vram[addr | i] & ~bit_mask);
|
|
} else {
|
|
for (i = 0; i < count; i++) {
|
|
if (writemask2 & (1 << i))
|
|
svga->vram[addr | i] = (val & bit_mask) | (svga->vram[addr | i] & ~bit_mask);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
ht216_write_common(ht216_t *ht216, uint32_t addr, uint8_t val)
|
|
{
|
|
/*Input B = CD.5
|
|
Input A = FE[3:2]
|
|
00 = Set/Reset output mode
|
|
output = CPU-side ALU input
|
|
01 = Solid fg/bg mode (3C4:FA/FB)
|
|
Bit mask = 3CF.F5 or CPU byte
|
|
10 = Dithered fg (3CF:EC-EF)
|
|
11 = RMW (dest data) (set if CD.5 = 1)
|
|
F/B ROP select = FE[5:4]
|
|
00 = CPU byte
|
|
01 = Bit mask (3CF:8)
|
|
1x = (3C4:F5)
|
|
*/
|
|
svga_t *svga = &ht216->svga;
|
|
int i;
|
|
uint8_t bit_mask = 0, rop_select = 0;
|
|
|
|
cycles -= video_timing_write_b;
|
|
|
|
addr &= svga->vram_mask;
|
|
|
|
val = ((val >> (svga->gdcreg[3] & 7)) | (val << (8 - (svga->gdcreg[3] & 7))));
|
|
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_EXALU) {
|
|
/*Extended ALU*/
|
|
switch (ht216->ht_regs[0xfe] & HT_REG_FE_FBRSL) {
|
|
case 0x00:
|
|
rop_select = val;
|
|
break;
|
|
case 0x10:
|
|
rop_select = svga->gdcreg[8];
|
|
break;
|
|
case 0x20: case 0x30:
|
|
rop_select = ht216->ht_regs[0xf5];
|
|
break;
|
|
}
|
|
switch (ht216->ht_regs[0xcd] & HT_REG_CD_BMSKSL) {
|
|
case 0x00:
|
|
bit_mask = svga->gdcreg[8];
|
|
break;
|
|
case 0x04:
|
|
bit_mask = val;
|
|
break;
|
|
case 0x08: case 0x0c:
|
|
bit_mask = ht216->ht_regs[0xf5];
|
|
break;
|
|
}
|
|
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_FP8PCEXP) { /*1->8 bit expansion*/
|
|
addr = (addr << 3) & 0xfffff;
|
|
for (i = 0; i < 8; i++)
|
|
ht216_dm_extalu_write(ht216, addr + i, (val & (0x80 >> i)) ? 0xff : 0, (bit_mask & (0x80 >> i)) ? 0xff : 0, val, (rop_select & (0x80 >> i)) ? 0xff : 0);
|
|
} else {
|
|
ht216_dm_extalu_write(ht216, addr, val, bit_mask, val, rop_select);
|
|
}
|
|
} else if (ht216->ht_regs[0xf3]) {
|
|
if (ht216->ht_regs[0xf3] & 2) {
|
|
ht216_dm_masked_write(ht216, addr, val, val);
|
|
} else
|
|
ht216_dm_masked_write(ht216, addr, val, ht216->ht_regs[0xf4]);
|
|
} else {
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_FP8PCEXP) { /*1->8 bit expansion*/
|
|
addr = (addr << 3) & 0xfffff;
|
|
for (i = 0; i < 8; i++)
|
|
ht216_dm_write(ht216, addr + i, (val & (0x80 >> i)) ? 0xff : 0, val);
|
|
} else {
|
|
ht216_dm_write(ht216, addr, val, val);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
ht216_write(uint32_t addr, uint8_t val, void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
svga_t *svga = &ht216->svga;
|
|
uint32_t prev_addr = addr;
|
|
|
|
addr &= svga->banked_mask;
|
|
addr = (addr & 0x7fff) + ht216->write_banks[(addr >> 15) & 1];
|
|
|
|
if (svga->crtc[0x17] == 0xeb && !(svga->gdcreg[6] & 0xc) && prev_addr >= 0xb0000)
|
|
addr += 0x10000;
|
|
else if (svga->chain4 && ((ht216->ht_regs[0xfc] & 0x06) == 0x06))
|
|
addr = (addr & 0xfffeffff) | (prev_addr & 0x10000);
|
|
|
|
if (!ht216->ht_regs[0xcd] && !ht216->ht_regs[0xfe] && !ht216->ht_regs[0xf3] && svga->crtc[0x17] != 0xeb) {
|
|
svga_write_linear(addr, val, svga);
|
|
} else
|
|
ht216_write_common(ht216, addr, val);
|
|
}
|
|
|
|
|
|
static void
|
|
ht216_writew(uint32_t addr, uint16_t val, void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
svga_t *svga = &ht216->svga;
|
|
uint32_t prev_addr = addr;
|
|
|
|
addr &= svga->banked_mask;
|
|
addr = (addr & 0x7fff) + ht216->write_banks[(addr >> 15) & 1];
|
|
|
|
if (svga->crtc[0x17] == 0xeb && !(svga->gdcreg[6] & 0xc) && prev_addr >= 0xb0000)
|
|
addr += 0x10000;
|
|
else if (svga->chain4 && ((ht216->ht_regs[0xfc] & 0x06) == 0x06))
|
|
addr = (addr & 0xfffeffff) | (prev_addr & 0x10000);
|
|
|
|
if (!ht216->ht_regs[0xcd] && !ht216->ht_regs[0xfe] && !ht216->ht_regs[0xf3] && svga->crtc[0x17] != 0xeb)
|
|
svga_writew_linear(addr, val, svga);
|
|
else {
|
|
ht216_write_common(ht216, addr, val);
|
|
ht216_write_common(ht216, addr+1, val >> 8);
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
ht216_writel(uint32_t addr, uint32_t val, void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
svga_t *svga = &ht216->svga;
|
|
uint32_t prev_addr = addr;
|
|
|
|
addr &= svga->banked_mask;
|
|
addr = (addr & 0x7fff) + ht216->write_banks[(addr >> 15) & 1];
|
|
|
|
if (svga->crtc[0x17] == 0xeb && !(svga->gdcreg[6] & 0xc) && prev_addr >= 0xb0000)
|
|
addr += 0x10000;
|
|
else if (svga->chain4 && ((ht216->ht_regs[0xfc] & 0x06) == 0x06))
|
|
addr = (addr & 0xfffeffff) | (prev_addr & 0x10000);
|
|
|
|
if (!ht216->ht_regs[0xcd] && !ht216->ht_regs[0xfe] && !ht216->ht_regs[0xf3] && svga->crtc[0x17] != 0xeb)
|
|
svga_writel_linear(addr, val, svga);
|
|
else {
|
|
ht216_write_common(ht216, addr, val);
|
|
ht216_write_common(ht216, addr+1, val >> 8);
|
|
ht216_write_common(ht216, addr+2, val >> 16);
|
|
ht216_write_common(ht216, addr+3, val >> 24);
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
ht216_write_linear(uint32_t addr, uint8_t val, void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
svga_t *svga = &ht216->svga;
|
|
|
|
addr -= ht216->linear_base;
|
|
if (!svga->chain4) /*Bits 16 and 17 of linear address are unused in planar modes*/
|
|
addr = (addr & 0xffff) | ((addr & 0xc0000) >> 2);
|
|
addr += ht216->write_banks[0];
|
|
|
|
if (!ht216->ht_regs[0xcd] && !ht216->ht_regs[0xfe])
|
|
svga_write_linear(addr, val, svga);
|
|
else
|
|
ht216_write_common(ht216, addr, val);
|
|
}
|
|
|
|
|
|
static void
|
|
ht216_writew_linear(uint32_t addr, uint16_t val, void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
svga_t *svga = &ht216->svga;
|
|
|
|
addr -= ht216->linear_base;
|
|
if (!svga->chain4) /*Bits 16 and 17 of linear address are unused in planar modes*/
|
|
addr = (addr & 0xffff) | ((addr & 0xc0000) >> 2);
|
|
addr += ht216->write_banks[0];
|
|
|
|
if (!ht216->ht_regs[0xcd] && !ht216->ht_regs[0xfe])
|
|
svga_writew_linear(addr, val, svga);
|
|
else {
|
|
ht216_write_common(ht216, addr, val);
|
|
ht216_write_common(ht216, addr+1, val >> 8);
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
ht216_writel_linear(uint32_t addr, uint32_t val, void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
svga_t *svga = &ht216->svga;
|
|
|
|
addr -= ht216->linear_base;
|
|
if (!svga->chain4) /*Bits 16 and 17 of linear address are unused in planar modes*/
|
|
addr = (addr & 0xffff) | ((addr & 0xc0000) >> 2);
|
|
addr += ht216->write_banks[0];
|
|
|
|
if (!ht216->ht_regs[0xcd] && !ht216->ht_regs[0xfe])
|
|
svga_writel_linear(addr, val, svga);
|
|
else {
|
|
ht216_write_common(ht216, addr, val);
|
|
ht216_write_common(ht216, addr+1, val >> 8);
|
|
ht216_write_common(ht216, addr+2, val >> 16);
|
|
ht216_write_common(ht216, addr+3, val >> 24);
|
|
}
|
|
}
|
|
|
|
|
|
static uint8_t
|
|
ht216_read_common(ht216_t *ht216, uint32_t addr)
|
|
{
|
|
svga_t *svga = &ht216->svga;
|
|
uint32_t latch_addr = 0;
|
|
int offset, readplane = svga->readplane;
|
|
uint8_t or, i;
|
|
uint8_t count = 2;
|
|
uint8_t plane, pixel;
|
|
uint8_t temp, ret;
|
|
|
|
if (ht216->ht_regs[0xc8] & HT_REG_C8_MOVSB)
|
|
addr <<= 3;
|
|
|
|
addr &= svga->vram_mask;
|
|
|
|
cycles -= video_timing_read_b;
|
|
|
|
count = (1 << count);
|
|
|
|
if (svga->chain4 && svga->packed_chain4) {
|
|
addr &= svga->decode_mask;
|
|
if (addr >= svga->vram_max)
|
|
return 0xff;
|
|
latch_addr = (addr & svga->vram_mask) & ~7;
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_ASTODE)
|
|
latch_addr += (svga->gdcreg[3] & 7);
|
|
for (i = 0; i < 8; i++)
|
|
ht216->bg_latch[i] = svga->vram[dword_remap(svga, latch_addr + i)];
|
|
return svga->vram[dword_remap(svga, addr) & svga->vram_mask];
|
|
} else if (svga->chain4) {
|
|
readplane = addr & 3;
|
|
addr = ((addr & 0xfffc) << 2) | ((addr & 0x30000) >> 14) | (addr & ~0x3ffff);
|
|
} else if (svga->chain2_read && (svga->crtc[0x17] != 0xeb)) {
|
|
readplane = (readplane & 2) | (addr & 1);
|
|
addr &= ~1;
|
|
addr <<= 2;
|
|
} else
|
|
addr <<= 2;
|
|
|
|
addr &= svga->decode_mask;
|
|
|
|
if (addr >= svga->vram_max)
|
|
return 0xff;
|
|
|
|
addr &= svga->vram_mask;
|
|
|
|
latch_addr = addr & ~7;
|
|
if (ht216->ht_regs[0xcd] & HT_REG_CD_ASTODE) {
|
|
offset = addr & 7;
|
|
for (i = 0; i < 8; i++)
|
|
ht216->bg_latch[i] = svga->vram[latch_addr | ((offset + i) & 7)];
|
|
} else {
|
|
for (i = 0; i < 8; i++)
|
|
ht216->bg_latch[i] = svga->vram[latch_addr | i];
|
|
}
|
|
|
|
or = addr & 4;
|
|
for (i = 0; i < 4; i++)
|
|
svga->latch.b[i] = ht216->bg_latch[i | or];
|
|
|
|
if (svga->readmode) {
|
|
temp = 0xff;
|
|
|
|
for (pixel = 0; pixel < 8; pixel++) {
|
|
for (plane = 0; plane < (1 << count); plane++) {
|
|
if (svga->colournocare & (1 << plane)) {
|
|
/* If we care about a plane, and the pixel has a mismatch on it, clear its bit. */
|
|
if (((svga->latch.b[plane] >> pixel) & 1) != ((svga->colourcompare >> plane) & 1))
|
|
temp &= ~(1 << pixel);
|
|
}
|
|
}
|
|
}
|
|
|
|
ret = temp;
|
|
} else
|
|
ret = svga->vram[addr | readplane];
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static uint8_t
|
|
ht216_read(uint32_t addr, void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
svga_t *svga = &ht216->svga;
|
|
uint32_t prev_addr = addr;
|
|
|
|
addr &= svga->banked_mask;
|
|
addr = (addr & 0x7fff) + ht216->read_banks[(addr >> 15) & 1];
|
|
|
|
if (svga->crtc[0x17] == 0xeb && !(svga->gdcreg[6] & 0xc) && prev_addr >= 0xb0000)
|
|
addr += 0x10000;
|
|
else if (svga->chain4 && ((ht216->ht_regs[0xfc] & 0x06) == 0x06))
|
|
addr = (addr & 0xfffeffff) | (prev_addr & 0x10000);
|
|
|
|
return ht216_read_common(ht216, addr);
|
|
}
|
|
|
|
|
|
static uint8_t
|
|
ht216_read_linear(uint32_t addr, void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
svga_t *svga = &ht216->svga;
|
|
|
|
addr -= ht216->linear_base;
|
|
if (!svga->chain4) /*Bits 16 and 17 of linear address are unused in planar modes*/
|
|
addr = (addr & 0xffff) | ((addr & 0xc0000) >> 2);
|
|
addr += ht216->read_banks[0];
|
|
|
|
return ht216_read_common(ht216, addr);
|
|
}
|
|
|
|
static uint8_t
|
|
radius_mca_read(int port, void *priv)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)priv;
|
|
ht216_log("Port %03x MCA read = %02x\n", port, ht216->pos_regs[port & 7]);
|
|
return (ht216->pos_regs[port & 7]);
|
|
}
|
|
|
|
static void
|
|
radius_mca_write(int port, uint8_t val, void *priv)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)priv;
|
|
|
|
/* MCA does not write registers below 0x0100. */
|
|
if (port < 0x0102) return;
|
|
|
|
ht216_log("Port %03x MCA write = %02x, setup mode = %02x\n", port, val, ht216->ht_regs[0xfc] & 0x80);
|
|
|
|
/* Save the MCA register value. */
|
|
ht216->pos_regs[port & 7] = val;
|
|
}
|
|
|
|
static uint8_t
|
|
radius_mca_feedb(void *priv)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
void
|
|
*ht216_init(const device_t *info, uint32_t mem_size, int has_rom)
|
|
{
|
|
ht216_t *ht216 = malloc(sizeof(ht216_t));
|
|
svga_t *svga;
|
|
|
|
memset(ht216, 0, sizeof(ht216_t));
|
|
svga = &ht216->svga;
|
|
|
|
if (info->flags & DEVICE_VLB)
|
|
video_inform(VIDEO_FLAG_TYPE_SPECIAL, &timing_v7vga_vlb);
|
|
else if (info->flags & DEVICE_MCA)
|
|
video_inform(VIDEO_FLAG_TYPE_SPECIAL, &timing_v7vga_mca);
|
|
else
|
|
video_inform(VIDEO_FLAG_TYPE_SPECIAL, &timing_v7vga_isa);
|
|
|
|
svga_init(info, svga, ht216, mem_size,
|
|
ht216_recalctimings,
|
|
ht216_in, ht216_out,
|
|
ht216_hwcursor_draw,
|
|
NULL);
|
|
|
|
switch (has_rom) {
|
|
case 1:
|
|
rom_init(&ht216->bios_rom, BIOS_G2_GC205_PATH, 0xc0000, 0x8000, 0x7fff, 0, MEM_MAPPING_EXTERNAL);
|
|
break;
|
|
case 2:
|
|
rom_init(&ht216->bios_rom, BIOS_VIDEO7_VGA_1024I_PATH, 0xc0000, 0x8000, 0x7fff, 0, MEM_MAPPING_EXTERNAL);
|
|
break;
|
|
case 3:
|
|
ht216->monitor_type = device_get_config_int("monitor_type");
|
|
rom_init(&ht216->bios_rom, BIOS_HT216_32_PATH, 0xc0000, 0x8000, 0x7fff, 0, MEM_MAPPING_EXTERNAL);
|
|
/* Patch the BIOS for monitor type. */
|
|
if (ht216->monitor_type & 0x10) {
|
|
/* Color */
|
|
ht216->bios_rom.rom[0x0526] = 0x0c;
|
|
ht216->bios_rom.rom[0x0528] = 0xeb;
|
|
ht216->bios_rom.rom[0x7fff] += 0x26;
|
|
} else {
|
|
/* Mono */
|
|
ht216->bios_rom.rom[0x0526] = 0x24;
|
|
ht216->bios_rom.rom[0x0527] = 0xef;
|
|
ht216->bios_rom.rom[0x0528] = ht216->bios_rom.rom[0x0529] = 0x90;
|
|
ht216->bios_rom.rom[0x7fff] += 0xfe;
|
|
}
|
|
/* Patch bios for interlaced/non-interlaced. */
|
|
if (ht216->monitor_type & 0x08) {
|
|
/* Non-Interlaced */
|
|
ht216->bios_rom.rom[0x170b] = 0x0c;
|
|
ht216->bios_rom.rom[0x170d] = ht216->bios_rom.rom[0x170e] = 0x90;
|
|
ht216->bios_rom.rom[0x7fff] += 0xf4;
|
|
} else {
|
|
/* Interlaced */
|
|
ht216->bios_rom.rom[0x170b] = 0x24;
|
|
ht216->bios_rom.rom[0x170c] = 0xf7;
|
|
ht216->bios_rom.rom[0x170d] = 0xeb;
|
|
ht216->bios_rom.rom[0x7fff] += 0x1e;
|
|
}
|
|
break;
|
|
case 4:
|
|
if ((info->local == 0x7152) && (info->flags & DEVICE_ISA))
|
|
ht216->extensions = device_get_config_int("extensions");
|
|
else if ((info->local == 0x7152) && (info->flags & DEVICE_MCA)) {
|
|
ht216->pos_regs[0] = 0xb7;
|
|
ht216->pos_regs[1] = 0x80;
|
|
mca_add(radius_mca_read, radius_mca_write, radius_mca_feedb, NULL, ht216);
|
|
}
|
|
rom_init(&ht216->bios_rom, BIOS_RADIUS_SVGA_MULTIVIEW_PATH, 0xc0000, 0x8000, 0x7fff, 0, MEM_MAPPING_EXTERNAL);
|
|
break;
|
|
}
|
|
|
|
svga->hwcursor.ysize = 32;
|
|
ht216->vram_mask = mem_size - 1;
|
|
svga->decode_mask = mem_size - 1;
|
|
|
|
if (has_rom == 4)
|
|
svga->ramdac = device_add(&sc11484_nors2_ramdac_device);
|
|
|
|
if ((info->flags & DEVICE_VLB) || (info->flags & DEVICE_MCA)) {
|
|
mem_mapping_set_handler(&svga->mapping, ht216_read, NULL, NULL, ht216_write, ht216_writew, ht216_writel);
|
|
mem_mapping_add(&ht216->linear_mapping, 0, 0, ht216_read_linear, NULL, NULL, ht216_write_linear, ht216_writew_linear, ht216_writel_linear, NULL, MEM_MAPPING_EXTERNAL, svga);
|
|
} else {
|
|
mem_mapping_set_handler(&svga->mapping, ht216_read, NULL, NULL, ht216_write, ht216_writew, NULL);
|
|
mem_mapping_add(&ht216->linear_mapping, 0, 0, ht216_read_linear, NULL, NULL, ht216_write_linear, ht216_writew_linear, NULL, NULL, MEM_MAPPING_EXTERNAL, svga);
|
|
}
|
|
mem_mapping_set_p(&svga->mapping, ht216);
|
|
mem_mapping_disable(&ht216->linear_mapping);
|
|
|
|
ht216->id = info->local;
|
|
ht216->isabus = (info->flags & DEVICE_ISA);
|
|
ht216->mca = (info->flags & DEVICE_MCA);
|
|
|
|
io_sethandler(0x03c0, 0x0020, ht216_in, NULL, NULL, ht216_out, NULL, NULL, ht216);
|
|
io_sethandler(0x46e8, 0x0001, ht216_in, NULL, NULL, ht216_out, NULL, NULL, ht216);
|
|
|
|
svga->bpp = 8;
|
|
svga->miscout = 1;
|
|
|
|
if (ht216->id == 0x7861)
|
|
ht216->ht_regs[0xb4] = 0x08; /*32-bit DRAM bus*/
|
|
|
|
if (ht216->id == 0x7152)
|
|
ht216->reg_3cb = 0x20;
|
|
|
|
/* Initialize the cursor pointer towards the end of its segment, needed for ht256sf.drv to work correctly
|
|
when Windows 3.1 is started after boot. */
|
|
ht216->ht_regs[0x94] = 0xff;
|
|
|
|
svga->adv_flags = 0;
|
|
|
|
return ht216;
|
|
}
|
|
|
|
|
|
static void *
|
|
g2_gc205_init(const device_t *info)
|
|
{
|
|
ht216_t *ht216 = ht216_init(info, 1 << 19, 1);
|
|
|
|
return ht216;
|
|
}
|
|
|
|
|
|
static void *
|
|
v7_vga_1024i_init(const device_t *info)
|
|
{
|
|
ht216_t *ht216 = ht216_init(info, device_get_config_int("memory") << 10, 2);
|
|
|
|
return ht216;
|
|
}
|
|
|
|
|
|
static void *
|
|
ht216_pb410a_init(const device_t *info)
|
|
{
|
|
ht216_t *ht216 = ht216_init(info, 1 << 20, 0);
|
|
|
|
return ht216;
|
|
}
|
|
|
|
|
|
static void *
|
|
ht216_standalone_init(const device_t *info)
|
|
{
|
|
ht216_t *ht216 = ht216_init(info, 1 << 20, 3);
|
|
|
|
return ht216;
|
|
}
|
|
|
|
static void *
|
|
radius_svga_multiview_init(const device_t *info)
|
|
{
|
|
ht216_t *ht216 = ht216_init(info, 1 << 20, 4);
|
|
|
|
return ht216;
|
|
}
|
|
|
|
|
|
static int
|
|
g2_gc205_available(void)
|
|
{
|
|
return rom_present(BIOS_G2_GC205_PATH);
|
|
}
|
|
|
|
|
|
static int
|
|
v7_vga_1024i_available(void)
|
|
{
|
|
return rom_present(BIOS_VIDEO7_VGA_1024I_PATH);
|
|
}
|
|
|
|
|
|
static int
|
|
ht216_standalone_available(void)
|
|
{
|
|
return rom_present(BIOS_HT216_32_PATH);
|
|
}
|
|
|
|
static int
|
|
radius_svga_multiview_available(void)
|
|
{
|
|
return rom_present(BIOS_RADIUS_SVGA_MULTIVIEW_PATH);
|
|
}
|
|
|
|
|
|
void
|
|
ht216_close(void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
|
|
svga_close(&ht216->svga);
|
|
|
|
free(ht216);
|
|
}
|
|
|
|
|
|
void
|
|
ht216_speed_changed(void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
|
|
svga_recalctimings(&ht216->svga);
|
|
}
|
|
|
|
|
|
void
|
|
ht216_force_redraw(void *p)
|
|
{
|
|
ht216_t *ht216 = (ht216_t *)p;
|
|
|
|
ht216->svga.fullchange = changeframecount;
|
|
}
|
|
|
|
|
|
static const device_config_t v7_vga_1024i_config[] =
|
|
{
|
|
{
|
|
"memory", "Memory size", CONFIG_SELECTION, "", 512, "", { 0 },
|
|
{
|
|
{
|
|
"256 kB", 256
|
|
},
|
|
{
|
|
"512 kB", 512
|
|
},
|
|
{
|
|
""
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"", "", -1
|
|
}
|
|
};
|
|
|
|
static const device_config_t ht216_32_standalone_config[] =
|
|
{
|
|
{
|
|
"monitor_type", "Monitor type", CONFIG_SELECTION, "", 0x18, "", { 0 },
|
|
{
|
|
{
|
|
"Mono Interlaced", 0x00
|
|
},
|
|
{
|
|
"Mono Non-Interlaced", 0x08
|
|
},
|
|
{
|
|
"Color Interlaced", 0x10
|
|
},
|
|
{
|
|
"Color Non-Interlaced", 0x18
|
|
},
|
|
{
|
|
""
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"", "", -1
|
|
}
|
|
};
|
|
|
|
static const device_config_t radius_svga_multiview_config[] =
|
|
{
|
|
{
|
|
"extensions", "Extensions", CONFIG_SELECTION, "", 0x00, "", { 0 },
|
|
{
|
|
{
|
|
"Extensions Enabled", 0x00
|
|
},
|
|
{
|
|
"Extensions Disabled", 0x02
|
|
},
|
|
{
|
|
""
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"", "", -1
|
|
}
|
|
};
|
|
|
|
const device_t g2_gc205_device =
|
|
{
|
|
"G2 GC205",
|
|
DEVICE_ISA,
|
|
0x7070,
|
|
g2_gc205_init,
|
|
ht216_close,
|
|
NULL,
|
|
{ g2_gc205_available },
|
|
ht216_speed_changed,
|
|
ht216_force_redraw
|
|
};
|
|
|
|
const device_t v7_vga_1024i_device =
|
|
{
|
|
"Video 7 VGA 1024i (HT208)",
|
|
DEVICE_ISA,
|
|
0x7140,
|
|
v7_vga_1024i_init,
|
|
ht216_close,
|
|
NULL,
|
|
{ v7_vga_1024i_available },
|
|
ht216_speed_changed,
|
|
ht216_force_redraw,
|
|
v7_vga_1024i_config
|
|
};
|
|
|
|
const device_t ht216_32_pb410a_device =
|
|
{
|
|
"Headland HT216-32 (Packard Bell PB410A)",
|
|
DEVICE_VLB,
|
|
0x7861, /*HT216-32*/
|
|
ht216_pb410a_init,
|
|
ht216_close,
|
|
NULL,
|
|
{ NULL },
|
|
ht216_speed_changed,
|
|
ht216_force_redraw
|
|
};
|
|
|
|
const device_t ht216_32_standalone_device =
|
|
{
|
|
"Headland HT216-32",
|
|
DEVICE_VLB,
|
|
0x7861, /*HT216-32*/
|
|
ht216_standalone_init,
|
|
ht216_close,
|
|
NULL,
|
|
{ ht216_standalone_available },
|
|
ht216_speed_changed,
|
|
ht216_force_redraw,
|
|
ht216_32_standalone_config
|
|
};
|
|
|
|
const device_t radius_svga_multiview_isa_device =
|
|
{
|
|
"Radius SVGA Multiview ISA (HT209)",
|
|
DEVICE_ISA | DEVICE_AT,
|
|
0x7152, /*HT209*/
|
|
radius_svga_multiview_init,
|
|
ht216_close,
|
|
NULL,
|
|
{ radius_svga_multiview_available },
|
|
ht216_speed_changed,
|
|
ht216_force_redraw,
|
|
radius_svga_multiview_config
|
|
};
|
|
|
|
const device_t radius_svga_multiview_mca_device =
|
|
{
|
|
"Radius SVGA Multiview MCA (HT209)",
|
|
DEVICE_MCA,
|
|
0x7152, /*HT209*/
|
|
radius_svga_multiview_init,
|
|
ht216_close,
|
|
NULL,
|
|
{ radius_svga_multiview_available },
|
|
ht216_speed_changed,
|
|
ht216_force_redraw,
|
|
NULL
|
|
}; |