/* $Id: scsi_mmc.h,v 1.9 2004/07/19 01:13:31 rocky Exp $ Copyright (C) 2003, 2004 Rocky Bernstein This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /*! \file scsi_mmc.h \brief Common definitions for SCSI MMC (Multimedia commands). */ #ifndef __SCSI_MMC_H__ #define __SCSI_MMC_H__ /*! Level values that can go into READ_CD */ #define CDIO_MMC_READ_TYPE_ANY 0 /**< All types */ #define CDIO_MMC_READ_TYPE_CDDA 1 /**< Only CD-DA sectors */ #define CDIO_MMC_READ_TYPE_MODE1 2 /**< mode1 sectors (user data = 2048) */ #define CDIO_MMC_READ_TYPE_MODE2 3 /**< mode2 sectors form1 or form2 */ #define CDIO_MMC_READ_TYPE_M2F1 4 /**< mode2 sectors form1 */ #define CDIO_MMC_READ_TYPE_M2F2 5 /**< mode2 sectors form2 */ /*! Format values for READ_TOC */ #define CDIO_MMC_READTOC_FMT_TOC 0 #define CDIO_MMC_READTOC_FMT_SESSION 1 #define CDIO_MMC_READTOC_FMT_FULTOC 2 #define CDIO_MMC_READTOC_FMT_PMA 3 /**< Q subcode data */ #define CDIO_MMC_READTOC_FMT_ATIP 4 /**< includes media type */ #define CDIO_MMC_READTOC_FMT_CDTEXT 5 /**< CD-TEXT info */ /*! The generic packet command opcodes for CD/DVD Logical Units. */ #define CDIO_MMC_GPCMD_MODE_SENSE 0x1a #define CDIO_MMC_GPCMD_START_STOP 0x1b #define CDIO_MMC_GPCMD_ALLOW_MEDIUM_REMOVAL 0x1e #define CDIO_MMC_GPCMD_READ_10 0x28 #define CDIO_MMC_GPCMD_READ_SUBCHANNEL 0x42 #define CDIO_MMC_GPCMD_READ_TOC 0x43 #define CDIO_MMC_GPCMD_MODE_SELECT 0x55 #define CDIO_MMC_GPCMD_MODE_SELECT_6 0x15 #define CDIO_MMC_GPCMD_MODE_SENSE_10 0x5a #define CDIO_MMC_GPCMD_READ_12 0xa8 #define CDIO_MMC_GPCMD_READ_CD 0xbe #define CDIO_MMC_GPCMD_READ_MSF 0xb9 /*! Page codes for MODE SENSE and MODE SET. */ #define CDIO_MMC_R_W_ERROR_PAGE 0x01 #define CDIO_MMC_WRITE_PARMS_PAGE 0x05 #define CDIO_MMC_AUDIO_CTL_PAGE 0x0e #define CDIO_MMC_CDR_PARMS_PAGE 0x0d #define CDIO_MMC_POWER_PAGE 0x1a #define CDIO_MMC_FAULT_FAIL_PAGE 0x1c #define CDIO_MMC_TO_PROTECT_PAGE 0x1d #define CDIO_MMC_CAPABILITIES_PAGE 0x2a #define CDIO_MMC_ALL_PAGES 0x3f /*! This is listed as optional in ATAPI 2.6, but is (curiously) missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji Table 377 as an MMC command for SCSi devices though... Most ATAPI drives support it. */ #define CDIO_MMC_GPCMD_SET_SPEED 0xbb #define CDIO_MMC_SET_COMMAND(rec, command) \ rec[0] = command #define CDIO_MMC_SET_READ_TYPE(rec, sector_type) \ rec[1] = (sector_type << 2) #define CDIO_MMC_SET_READ_LBA(rec, lba) \ rec[2] = (lba >> 24) & 0xff; \ rec[3] = (lba >> 16) & 0xff; \ rec[4] = (lba >> 8) & 0xff; \ rec[5] = (lba ) & 0xff #define CDIO_MMC_SET_START_TRACK(rec, command) \ rec[6] = command #define CDIO_MMC_SET_READ_LENGTH(rec, len) \ rec[6] = (len >> 16) & 0xff; \ rec[7] = (len >> 8) & 0xff; \ rec[8] = (len ) & 0xff #define CDIO_MMC_MCSB_ALL_HEADERS 0x78 #define CDIO_MMC_SET_MAIN_CHANNEL_SELECTION_BITS(rec, val) \ rec[9] = val; /*! On input a MODE_SENSE command was issued and we have the results in p. We interpret this and return a bit mask set according to the capabilities. */ void cdio_get_drive_cap_mmc(const uint8_t *p, /*out*/ cdio_drive_read_cap_t *p_read_cap, /*out*/ cdio_drive_write_cap_t *p_write_cap, /*out*/ cdio_drive_misc_cap_t *p_misc_cap); #endif /* __SCSI_MMC_H__ */