Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

drivers/net/wireless/ath/Kconfig

@@ -1,5 +1,6 @@
 config ATH_COMMON
 	tristate "Atheros Wireless Cards"
+	depends on WLAN_80211
 	depends on ATH5K || ATH9K || AR9170_USB
 
 source "drivers/net/wireless/ath/ath5k/Kconfig"

drivers/net/wireless/ath/ath9k/xmit.c

@@ -355,7 +355,14 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 		}
 
 		if (bf_next == NULL) {
-			INIT_LIST_HEAD(&bf_head);
+			/*
+			 * Make sure the last desc is reclaimed if it
+			 * not a holding desc.
+			 */
+			if (!bf_last->bf_stale)
+				list_move_tail(&bf->list, &bf_head);
+			else
+				INIT_LIST_HEAD(&bf_head);
 		} else {
 			ASSERT(!list_empty(bf_q));
 			list_move_tail(&bf->list, &bf_head);

drivers/net/wireless/b43/b43.h

@@ -648,6 +648,7 @@ struct b43_wl {
 	u8 nr_devs;
 
 	bool radiotap_enabled;
+	bool radio_enabled;
 
 	/* The beacon we are currently using (AP or IBSS mode).
 	 * This beacon stuff is protected by the irq_lock. */

drivers/net/wireless/b43/main.c

@@ -3497,8 +3497,8 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	if (phy->ops->set_rx_antenna)
 		phy->ops->set_rx_antenna(dev, antenna);
 
-	if (!!conf->radio_enabled != phy->radio_on) {
-		if (conf->radio_enabled) {
+	if (wl->radio_enabled != phy->radio_on) {
+		if (wl->radio_enabled) {
 			b43_software_rfkill(dev, false);
 			b43info(dev->wl, "Radio turned on by software\n");
 			if (!dev->radio_hw_enable) {
@@ -4339,6 +4339,7 @@ static int b43_op_start(struct ieee80211_hw *hw)
 	wl->beacon0_uploaded = 0;
 	wl->beacon1_uploaded = 0;
 	wl->beacon_templates_virgin = 1;
+	wl->radio_enabled = 1;
 
 	mutex_lock(&wl->mutex);
 
@@ -4378,6 +4379,7 @@ static void b43_op_stop(struct ieee80211_hw *hw)
 	if (b43_status(dev) >= B43_STAT_STARTED)
 		b43_wireless_core_stop(dev);
 	b43_wireless_core_exit(dev);
+	wl->radio_enabled = 0;
 	mutex_unlock(&wl->mutex);
 
 	cancel_work_sync(&(wl->txpower_adjust_work));
@@ -4560,6 +4562,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
 		B43_WARN_ON(1);
 
 	dev->phy.gmode = have_2ghz_phy;
+	dev->phy.radio_on = 1;
 	tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
 	b43_wireless_core_reset(dev, tmp);
 

drivers/net/wireless/b43/pcmcia.c

@@ -35,6 +35,7 @@
 
 static /*const */ struct pcmcia_device_id b43_pcmcia_tbl[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448),
+	PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476),
 	PCMCIA_DEVICE_NULL,
 };
 

drivers/net/wireless/b43legacy/b43legacy.h

@@ -607,6 +607,7 @@ struct b43legacy_wl {
 	u8 nr_devs;
 
 	bool radiotap_enabled;
+	bool radio_enabled;
 
 	/* The beacon we are currently using (AP or IBSS mode).
 	 * This beacon stuff is protected by the irq_lock. */

drivers/net/wireless/b43legacy/main.c

@@ -2689,8 +2689,8 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
 	/* Antennas for RX and management frame TX. */
 	b43legacy_mgmtframe_txantenna(dev, antenna_tx);
 
-	if (!!conf->radio_enabled != phy->radio_on) {
-		if (conf->radio_enabled) {
+	if (wl->radio_enabled != phy->radio_on) {
+		if (wl->radio_enabled) {
 			b43legacy_radio_turn_on(dev);
 			b43legacyinfo(dev->wl, "Radio turned on by software\n");
 			if (!dev->radio_hw_enable)
@@ -3441,6 +3441,7 @@ static int b43legacy_op_start(struct ieee80211_hw *hw)
 	wl->beacon0_uploaded = 0;
 	wl->beacon1_uploaded = 0;
 	wl->beacon_templates_virgin = 1;
+	wl->radio_enabled = 1;
 
 	mutex_lock(&wl->mutex);
 
@@ -3479,6 +3480,7 @@ static void b43legacy_op_stop(struct ieee80211_hw *hw)
 	if (b43legacy_status(dev) >= B43legacy_STAT_STARTED)
 		b43legacy_wireless_core_stop(dev);
 	b43legacy_wireless_core_exit(dev);
+	wl->radio_enabled = 0;
 	mutex_unlock(&wl->mutex);
 }
 
@@ -3620,6 +3622,7 @@ static int b43legacy_wireless_core_attach(struct b43legacy_wldev *dev)
 		have_bphy = 1;
 
 	dev->phy.gmode = (have_gphy || have_bphy);
+	dev->phy.radio_on = 1;
 	tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0;
 	b43legacy_wireless_core_reset(dev, tmp);
 

drivers/net/wireless/iwmc3200wifi/Kconfig

@@ -4,6 +4,15 @@ config IWM
 	depends on CFG80211
 	select WIRELESS_EXT
 	select FW_LOADER
+	help
+	  The Intel Wireless Multicomm 3200 hardware is a combo
+	  card with GPS, Bluetooth, WiMax and 802.11 radios. It
+	  runs over SDIO and is typically found on Moorestown
+	  based platform. This driver takes care of the 802.11
+	  part, which is a fullmac one.
+
+	  If you choose to build it as a module, it'll be called
+	  iwmc3200wifi.ko.
 
 config IWM_DEBUG
 	bool "Enable full debugging output in iwmc3200wifi"

drivers/net/wireless/mac80211_hwsim.c

@@ -418,6 +418,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 			continue;
 
 		if (!data2->started || !hwsim_ps_rx_ok(data2, skb) ||
+		    !data->channel || !data2->channel ||
 		    data->channel->center_freq != data2->channel->center_freq ||
 		    !(data->group & data2->group))
 			continue;

drivers/net/wireless/p54/p54common.c

@@ -912,13 +912,14 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 		}
 
 		__skb_unlink(entry, &priv->tx_queue);
-		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
 		frame_len = entry->len;
 		entry_hdr = (struct p54_hdr *) entry->data;
 		entry_data = (struct p54_tx_data *) entry_hdr->data;
-		priv->tx_stats[entry_data->hw_queue].len--;
+		if (priv->tx_stats[entry_data->hw_queue].len)
+			priv->tx_stats[entry_data->hw_queue].len--;
 		priv->stats.dot11ACKFailureCount += payload->tries - 1;
+		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
 		/*
 		 * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are

drivers/net/wireless/zd1211rw/zd_usb.c

@@ -38,7 +38,6 @@ static struct usb_device_id usb_ids[] = {
 	/* ZD1211 */
 	{ USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
-	{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 },
@@ -61,6 +60,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
 	/* ZD1211B */
+	{ USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
@@ -87,6 +87,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B },
 	/* "Driverless" devices that need ejecting */
 	{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
 	{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },

drivers/platform/x86/hp-wmi.c

@@ -171,7 +171,7 @@ static int hp_wmi_tablet_state(void)
 static int hp_wmi_set_block(void *data, bool blocked)
 {
 	unsigned long b = (unsigned long) data;
-	int query = BIT(b + 8) | ((!!blocked) << b);
+	int query = BIT(b + 8) | ((!blocked) << b);
 
 	return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
 }

drivers/ssb/pcmcia.c

@@ -678,7 +678,8 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
 			sprom->board_rev = tuple.TupleData[1];
 			break;
 		case SSB_PCMCIA_CIS_PA:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 9,
+			GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
+				      (tuple.TupleDataLen != 10),
 				      "pa tpl size");
 			sprom->pa0b0 = tuple.TupleData[1] |
 				 ((u16)tuple.TupleData[2] << 8);
@@ -718,7 +719,8 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
 			sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
 			break;
 		case SSB_PCMCIA_CIS_BFLAGS:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 3,
+			GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
+				      (tuple.TupleDataLen != 5),
 				      "bfl tpl size");
 			sprom->boardflags_lo = tuple.TupleData[1] |
 					 ((u16)tuple.TupleData[2] << 8);