This driver reads IBM Active Energy Manager energy/temperature/power
sensors on IBM System X hardware.
[akpm@linux-foundation.org: fix printk warnings]
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fuse allocates a separate bdi for each filesystem, and registers them
in sysfs with "MAJOR:MINOR" of sb->s_dev (st_dev). This works fine for
anon devices normally used by fuse, but can conflict with an already
registered BDI for "fuseblk" filesystems, where sb->s_dev represents a
real block device. In particularl this happens if a non-partitioned
device is being mounted.
Fix by registering with a different name for "fuseblk" filesystems.
Thanks to Ioan Ionita for the bug report.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Ioan Ionita <opslynx@gmail.com>
Tested-by: Ioan Ionita <opslynx@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Added IDs for the Foxconn P35AX-S mainboard to patch_realtek.c, so
that ALC883_6ST_DIG is used by default.
Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added a config table entry for the ASUS P5K-E/WIFI-AP mainboard (ID
1043:8227) to use AD1988_6STACK_DIG
Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The leftovers of the i8259 unification have nothing to do with i8259
at all. They contain interrupt init code and the i8259_xx name is just
misleading now.
Rename them to irqinit_32/64.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make conversion of i8259 very mechanical -- i8259 was generated by
diff -D, with too different parts left in i8259_32 and
i8259_64.c. Only "by hand" changes were removal of #ifdef from middle
of the comment (prevented compilation) and removal of one static to
allow splitting into files.
Of course, it will need some cleanups now, and those will follow.
Signed-of-by: Pavel Machek <pavel@suse.cz>
The leftovers of the i8259 unification have nothing to do with i8259
at all. They contain interrupt init code and the i8259_xx name is just
misleading now.
Rename them to initirq_32/64.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
mmiotrace_ioremap() expects to receive the original unaligned map phys address
and size. Also fix {un,}register_kmmio_probe() to deal properly with
unaligned size.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From 8979ee55cb6a429c4edd72ebec2244b849f6a79a Mon Sep 17 00:00:00 2001
From: Pekka Paalanen <pq@iki.fi>
Date: Sat, 12 Apr 2008 00:18:57 +0300
Mmiotrace is not reliable with multiple CPUs and may
miss events. Drop to single CPU when mmiotrace is activated.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Don't try to build mmiotrace when CONFIG_PCI=n.
next-20080416/kernel/trace/trace_mmiotrace.c: In function 'mmio_print_pcidev':
next-20080416/kernel/trace/trace_mmiotrace.c:62: error: implicit declaration of function 'pci_dev_driver'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix gcc printk format warnings:
next-20080415/arch/x86/mm/mmio-mod.c: In function 'print_pte':
next-20080415/arch/x86/mm/mmio-mod.c:154: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'pteval_t'
next-20080415/arch/x86/mm/mmio-mod.c:154: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'pteval_t'
next-20080415/arch/x86/mm/mmio-mod.c: At top level:
next-20080415/arch/x86/mm/mmio-mod.c:403: warning: 'downed_cpus' defined but not used
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Non-zero pid indicates the MMIO access originated in user space.
We do not catch that kind of accesses yet, so always print zero for now.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This had become a no-op.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
another weekend, another patch. This should apply on top of my previous patch
from March 23rd.
Summary of changes:
- Print PCI device list in output header
- work around recursive probe hits on SMP
- refactor dis/arm_kmmio_fault_page() and add check for page levels
- remove un/reference_kmmio(), the die notifier hook is registered
permanently into the list
- explicitly check for single stepping in die notifier callback
I have tested this version on my UP Athlon64 desktop with Nouveau, and
SMP Core 2 Duo laptop with the proprietary nvidia driver. Both systems
are 64-bit. One previously unknown bug crept into daylight: the ftrace
framework's output routines print the first entry last after buffer has
wrapped around.
The most important regressions compared to non-ftrace mmiotrace at this
time are:
- failure of trace_pipe file
- illegal lines in output file
- unaware of losing data due to buffer full
Personally I'd like to see these three solved before submitting to
mainline. Other issues may come up once we know when we lose events.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
here is a patch that makes mmiotrace work almost well within the tracing
framework. The patch applies on top of my previous patch. I have my own
output formatting in place now.
Summary of changes:
- fix the NULL dereference that was due to not calling tracing_reset()
- add print_line() callback into struct tracer
- implement print_line() for mmiotrace, producing up-to-spec text
- add my output header, but that is not really called in the right place
- rewrote the main structs in mmiotrace
- added two new trace entry types: TRACE_MMIO_RW and TRACE_MMIO_MAP
- made some functions in trace.c non-static
- check current==NULL in tracing_generic_entry_update()
- fix(?) comparison in trace_seq_printf()
Things seem to work fine except a few issues. Markers (text lines injected
into mmiotrace log) are missing, I did not feel hacking them in before we
have variable length entries. My output header is printed only for 'trace'
file, but not 'trace_pipe'. For some reason, despite my quick fix,
iter->trace is NULL in print_trace_line() when called from 'trace_pipe'
file, which means I don't get proper output formatting.
I only tried by loading nouveau.ko, which just detects the card, and that
is traced fine. I didn't try further. Map, two reads and unmap. Works
perfectly.
I am missing the information about overflows, I'd prefer to have a
counter for lost events. I didn't try, but I guess currently there is no
way of knowning when it overflows?
So, not too far from being fully operational, it seems :-)
And looking at the diffstat, there also is some 700-900 lines of user space
code that just became obsolete.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>