Commit Graph

119302 Commits

Author SHA1 Message Date
Jan Beulich
911f6a7ba2 x86-64: extend MCE CPU quirk handling
At least on my Barcelona, I see MCE log entries after cold boot caused
by BIOS not properly clearing the respective registers. Therefore, this
patch extends the workaround to families 0x10 and 0x11 (the latter just
for completeness, I have nothing to verify this against).
At the same time, provide a way to make these entries visible via the
'mce=bootlog' command line option even on these machines.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 17:35:46 +02:00
Jan Beulich
79bf0e0353 i386: fix signal type for iret exception
.. since it uses ILL_BADSTK (which is meaningless in the context of
SIGSEGV).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 17:35:46 +02:00
Jan Beulich
86d78f6402 x86: fix watchdog ops for CoreDuo
There apparently was an unnoticed conflict between an earlier patch to
this file and mine (d1e084746b), which
I noticed only now. I suppose a change like the one below (untested) is
needed; I didn't get any response on a confirmation request for this from
the submitter of the first patch.

The issue is the writing of the 'checkbit' member at the end of
setup_intel_arch_watchdog(), which my patch made go to intel_arch_wd_ops
rather than wd_ops.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 17:35:46 +02:00
Adrian Bunk
b11caa7c70 fix asm-x86/{posix_types,unistd}.h
Jeff Chua reported that:

Commit e40c0fe6b0
(x86: cleanup duplicate includes) turned the userspace
asm-x86/posix_types.h and asm-x86/unistd.h headers into
empty files.

This patch reverts these bogus changes.

Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 17:35:46 +02:00
Jan Beulich
5065dbafc2 i386: fix asm constraint in do_IRQ()
Two prior changes resulted in the "ecx" clobber being lost.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 17:35:46 +02:00
Ingo Molnar
8db979bcfe x86 PAT: decouple from nonpromisc devmem
Linus pointed it out that PAT should not depend on NONPROMISC_DEVMEM.

Also make PAT non-default.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 16:01:26 +02:00
Ingo Molnar
1ebcc654f0 x86 PAT: tone down debugging messages
Linus reported these excessive debug printouts:

>       Overlap at 0xe0300000-0xe0400000
>       Overlap at 0xe0300000-0xe0380000
>       Overlap at 0xe0300000-0xe0400000
>       Overlap at 0xe0300000-0xe0400000
>       Overlap at 0xe0300000-0xe0400000
>       Overlap at 0xe0300000-0xe0400000
>       Overlap at 0xe0300000-0xe0400000

turn that into a pr_debug().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 16:01:26 +02:00
Jean Delvare
37c45df740 V4L/DVB (7751): ir-kbd-i2c: Save a temporary memory allocation in ir_probe
Using i2c_transfer instead of i2c_master_recv in ir_probe saves a
temporary memory allocation.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:29:58 -03:00
Adrian Bunk
b33d24c4cc V4L/DVB (7750): au0828/ cleanups and fixes
This patch contains the following cleanups and fixes:
- "debug" is definitely not a good name for a global variable,
  renamed it to "au0828_debug"
  this fixes a compile error with some kernel configurations
- since the module parameter is int the variable shouldn't be unsigned
- remove the {usb,bridge,i2c}_debug module parameters since they are
  already covered by the "debug" module parameter
- remove the unused au0828_bcount
- make the needlessly global i2c_scan static
- make the needlessly global dvb_register() static

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:29:57 -03:00
Mauro Carvalho Chehab
b9ef6bbbbe V4L/DVB (7748): tuner-core: some adjustments at tuner logs, if debug enabled
set_addr log were almost useless: discarded SET_TYPE_ADDR commands weren't
reported.

This patch changed set_addr printk to print a message only if set_addr is
wrong.

It also fix printk at set_type, since, if an attach were failing, nothing
were reported.

With the current code, working or not, a call to set_addr will produce a debug
printk.

also, set_type() were producing a false error message on tuner_xc2028, since
it were requesting for setting a frequency on a place where firmware name
weren't set yet.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:29:57 -03:00
Harvey Harrison
0e3cbe81d5 V4L/DVB (7746): pvrusb2: make signed one-bit bitfields unsigned
Single-bit signed bitfields can only take 0/-1 rather than 0/1 as the
drivers seems to assume...add unsigned.
Noticed by sparse:
drivers/media/video/pvrusb2/pvrusb2-devattr.h:107:34: error: dubious one-bit signed bitfield
drivers/media/video/pvrusb2/pvrusb2-devattr.h:114:37: error: dubious one-bit signed bitfield
drivers/media/video/pvrusb2/pvrusb2-devattr.h:117:30: error: dubious one-bit signed bitfield
drivers/media/video/pvrusb2/pvrusb2-devattr.h:120:23: error: dubious one-bit signed bitfield
drivers/media/video/pvrusb2/pvrusb2-devattr.h:124:24: error: dubious one-bit signed bitfield
drivers/media/video/pvrusb2/pvrusb2-devattr.h:128:23: error: dubious one-bit signed bitfield
drivers/media/video/pvrusb2/pvrusb2-devattr.h:138:36: error: dubious one-bit signed bitfield
drivers/media/video/pvrusb2/pvrusb2-devattr.h:143:24: error: dubious one-bit signed bitfield
drivers/media/video/pvrusb2/pvrusb2-devattr.h:144:28: error: dubious one-bit signed bitfield
drivers/media/video/pvrusb2/pvrusb2-devattr.h:145:26: error: dubious one-bit signed bitfield
drivers/media/video/pvrusb2/pvrusb2-devattr.h:146:23: error: dubious one-bit signed bitfield

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:29:57 -03:00
Michael Krufky
4aef8fddb6 V4L/DVB (7744): pvrusb2-dvb: add atsc/qam support for Hauppauge pvrusb2 model 751xx
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:29:56 -03:00
Steven Toth
d893d5dc7f V4L/DVB (7742): cx88: Add support for the DViCO FusionHDTV_7_GOLD digital modes
The S5H1411 demodulator is now enabled.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:29:56 -03:00
Steven Toth
8b4f1d0316 V4L/DVB (7741): s5h1411: Adding support for this ATSC/QAM demodulator
This adds full support for this demodulator.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:29:56 -03:00
Harvey Harrison
8367fe248d V4L/DVB (7740): tuner-xc2028.c dubious !x & y
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:29:55 -03:00
Harvey Harrison
a45e0b45e5 V4L/DVB (7739): mt312.h: dubious one-bit signed bitfield
Make it unsigned (0/1) rather than signed (0/-1).

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:29:55 -03:00
Brandon Philips
d0d14226b9 V4L/DVB (7735): Fix compilation for au0828
Encountered this error when testing.

Kernel: arch/x86/boot/bzImage is ready  (#76)
  MODPOST 813 modules
ERROR: "dvb_dmx_init" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "dvb_unregister_adapter" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "dvb_register_frontend" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "dvb_unregister_frontend" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "dvb_net_release" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "dvb_frontend_detach" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "dvb_dmxdev_release" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "dvb_net_init" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "dvb_dmx_release" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "dvb_dmx_swfilter_packets" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "dvb_register_adapter" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "dvb_dmxdev_init" [drivers/media/video/au0828/au0828.ko] undefined!
WARNING: modpost: Found 9 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:10:50 -03:00
Janne Grunau
094f9b4b31 V4L/DVB (7734): em28xx: copy and paste error in em28xx_init_isoc
Fixes a copy and paste error in check of kzalloc return value. The check block
was copied from the previous allocation but the variable wasn't exchanged.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:10:49 -03:00
Roel Kluin
50fa46b254 V4L/DVB (7733): blackbird_find_mailbox negative return ignored in blackbird_initialize_codec()
dev->mailbox is unsigned. so a negative return goes unnoticed

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:10:48 -03:00
Mauro Carvalho Chehab
63b79cfa05 V4L/DVB (7732): vivi: fix a warning
some gcc versions complain that fh is used without being defined.

The error report is bogus. However, fixing it is trivial. Better to make
gcc happy.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26 09:10:46 -03:00
Mathieu Segaud
09aa356b55 agp: convert drivers/char/agp/frontend.c to use unlocked_ioctl
As of now, agp_compat_ioctl already runs without the BKL.  Mutual exclusion
is enforced by agp_fe.agp_mutex in agp_ioctl() and agp_compat_ioctl().
Apply the same locking rationale to the two functions allowing BKL cleanup.

Signed-off-by: Mathieu Segaud <mathieu.segaud@regala.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-04-26 18:43:20 +10:00
Harvey Harrison
4ab92bcf77 agp: fix shadowed variable warning in amd-k7-agp.c
Introduced between 2.6.25-rc2 and -rc3
drivers/char/agp/amd-k7-agp.c:439:6: warning: symbol 'cap_ptr' shadows an
earlier one
drivers/char/agp/amd-k7-agp.c:414:5: originally declared here

cap_ptr is never used again in this function, don't bother redeclaring.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-04-26 18:38:04 +10:00
Dave Airlie
b74e2082f8 drm: _end is shadowing real _end, just rename it.
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-04-26 18:21:28 +10:00
Jesse Barnes
ac741ab71b drm/vbl rework: rework how the drm deals with vblank.
Other Authors: Michel Dänzer <michel@tungstengraphics.com>
mga: Ian Romanick <idr@us.ibm.com>
via: Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>

This re-works the DRM internals to provide a better interface for drivers
to expose vblank on multiple crtcs.

It also includes work done by Michel on making i915 triple buffering and pageflipping work properly.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-04-26 18:01:07 +10:00
Dave Airlie
2c14f28be2 drm: reorganise minor number handling using backported modesetting code.
rips out the head crap and replaces it with an idr and drm_minor structure

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-04-26 17:55:07 +10:00
Keith Packard
7b832b56bd drm/i915: Handle tiled buffers in vblank tasklet
The vblank tasklet update code must build 2D blt commands with the appropriate
tiled flags

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-04-26 17:48:54 +10:00
Keith Packard
a36b7dcc05 drm/i965: On I965, use correct 3DSTATE_DRAWING_RECTANGLE command in vblank
The batchbuffer submission paths were fixed to use the 965-specific command,
but the vblank tasklet was not. When the older version is sent, the 965 will
lock up.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-04-26 17:48:47 +10:00
Benjamin Herrenschmidt
f1c3e67eb7 drm: Remove unneeded dma sync in ATI pcigart alloc
Now that the ATI pcigart code uses dma_alloc_coherent, we don't need
the dma_sync_single_for_device() that we used to have here.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-04-26 17:48:21 +10:00
Benjamin Herrenschmidt
5ff6461133 drm: Fix mismerge of non-coherent DMA patch
The patch for supporting non coherent PCI DMA in the DRM was mismerged
causing the page protection to be updated for the wrong type of
mapping.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-04-26 17:48:17 +10:00
Harvey Harrison
b1721d0da2 v4l/dvb: add statics to avoid multiple definitions
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25 19:06:59 -07:00
Linus Torvalds
bc84e0a160 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] sanitize locate_fd()
  [PATCH] sanitize unshare_files/reset_files_struct
  [PATCH] sanitize handling of shared descriptor tables in failing execve()
  [PATCH] close race in unshare_files()
  [PATCH] restore sane ->umount_begin() API
  cifs: timeout dfs automounts +little fix.
2008-04-25 19:05:55 -07:00
Harvey Harrison
a92910723a mac-hid: fix build after lockdep annotation
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25 18:57:09 -07:00
Randy Dunlap
753d7054c3 documentation: remove smart-config.txt
As requested by Sam Ravnborg: Remove Documentation/smart-config.txt.

It is outdated and has been (functionally) replaced by
Documentation/kbuild/*.txt.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25 18:24:20 -07:00
Steve French
d09e860cf0 [CIFS] Adds to dns_resolver checking if the server name is an IP addr and skipping upcall in this case.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: sfrench@us.ibm.com
2008-04-26 00:22:23 +00:00
Roland Dreier
3dd7b71ca0 Export __locks_copy_lock() so modular lockd builds
Commit 1a747ee0 ("locks: don't call ->copy_lock methods on return of
conflicting locks") changed fs/lockd/svclock.c to call
__locks_copy_lock() instead of locks_copy_lock(), but lockd can be built
as a module and __locks_copy_lock() is not exported, which causes a
build error

    ERROR: "__locks_copy_lock" [fs/lockd/lockd.ko] undefined!

with CONFIG_LOCKD=m.

Fix this by exporting __locks_copy_lock().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25 15:49:46 -07:00
Yevgeny Petrilin
ed4d3c1061 mlx4_core: Add helper to move QP to ready-to-send
Avoid duplicating code in ethernet and FC modules.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-25 14:52:32 -07:00
Kenji Kaneshige
b7aa1f1603 pciehp: Fix command write
Current implementation of pciehp_write_cmd() always enables command
completed interrupt. But pciehp_write_cmd() is also used for clearing
command completed interrupt enable bit. In this case, we must not set
the command completed interrupt enable bit. To fix this bug, this
patch add the check to see if caller wants to change command complete
interrupt enable bit.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-25 14:39:14 -07:00
Kenji Kaneshige
ef0ff95f13 shpchp: fix slot name
Current shpchp uses the combination of bus number and slot number as a
slot name. But it is not a good idea because bus number is not a
physical identifier but a logical identifier. This is against the shpc
specification. So remove the bus number from the physical identifier.

However, there are some platforms with the problem that it provides
the same slot number. For those platforms, this patch also introduces
new module option 'shpchp_slot_with_bus'. If it is specified, shpchp
uses the combination of bus number and slot number as a slot name.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-25 14:39:12 -07:00
Adrian Bunk
4ea3e58b22 make pciehp_acpi_get_hp_hw_control_from_firmware()
this_patch_makes_the_needlessly_global_pciehp_acpi_get_hp_hw_control_from_firmware_static

;)

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-25 14:39:10 -07:00
Kenji Kaneshige
2aeeef1199 pciehp: Clean up pcie_init()
Clean up pciehp_ini(). This patch is trying to

  - Remove redundant capablity checks that were already done in PCIe
    port bus driver.
  - Separate the code only for debugging and make debug information
    easier to read.
  - Make the entire code easier to read and understand what it is doing.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-25 14:39:08 -07:00
Kenji Kaneshige
d84be093a8 pciehp: Mask hotplug interrupt at controller release
We must disable hotplug interrupt at controller relase time, otherwise
spurious interrupts might happen if any slot events occured (e.g. MRL
change) after unloading pciehp driver.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-25 14:39:07 -07:00
Kenji Kaneshige
cff006543f pciehp: Remove useless hotplug interrupt enabling
Hotplug interrupt is enabled at initialization and nobody clears it.
So we need to setup it in each command. This patch removes redundant
codes about this.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-25 14:39:06 -07:00
Kenji Kaneshige
ae416e6b29 pciehp: Fix wrong slot capability check
Current pciehp saves only 8bits of Slot Capability registers in
ctrl->ctrlcap. But it refers more than 8bit for checking EMI capability.
It is clearly a bug and EMI would never work. To fix this problem,
this patch saves full Slot Capability contens in ctrl->slot_cap. It also
reduce the redundant reads of Slot Capability register. And this pach
also cleans up the macros to check the slot capabilitys (e.g. MRL_SENS(),
and so on).

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-25 14:39:06 -07:00
Kenji Kaneshige
c27fb883df pciehp: Fix wrong slot control register access
Current pciehp implementaion clears hotplug events without waiting for
command completion. Because of this, events might not be cleared properly.
To prevent this problem, we must use pciehp_write_cmd() to write to
Slot Control register.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-25 14:39:05 -07:00
Kenji Kaneshige
2d32a9aed2 pciehp: Add missing memory barrier
Fix the possible race condition between pcie_isr() and pciehp_write_cmd()
because of the lack of memory barrier.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-25 14:39:02 -07:00
Kenji Kaneshige
c6b069e946 pciehp: Fix interrupt event handlig
Current pciehp implementation disables and re-enables hotplug interrupts
in its interrupt handler. This operation might be intend to guarantee
that interrupts for the events newly occured during previous events are
being handled will be successfully generated. But current implementaion
has the following prolems.

  - Current interrupt service routin clears status changes without
    waiting command completion. Because of this, events might not be
    cleared properly.
  - Current interrupt service routine clears status changes caused by
    disabling or enabling hotplug interrupts itself. This will lose new
    events that occurs during previous interrupts are being handled.
  - Current implementation doesn't have any serialization mechanism
    between the code to wait for command completion and the interrupt
    handler that clears the command completion events caused by itself.
    There is clearly race conditions between them, and it may cause
    the problem that waiting for command completion doesn't work for
    example.

To fix those problems, this patch stops disabling/re-enabling hotplug
interrupts in interrupt service routine. Instead of this, this patch
re-inspects Slot Status register after clearing what is presumed to
be the last bending interrupt in order to guarantee that all interrupt
events are serviced.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-25 14:38:57 -07:00
Kenji Kaneshige
3800345f72 pciehp: fix slot name
Current pciehp uses the combination of bus number and slot number as a
slot name. But it is not a good idea because bus number is not a
physical identifier but a logical identifier. This is against the PCIE
specification. So remove the bus number from the physical identifier.

However, there are some platforms with the problem that it provides
the same slot number. For those platforms, this patch also introduces
new module option 'pciehp_slot_with_bus'. If it is specified, pciehp
uses the combination of bus number and slot number as a slot name.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-25 14:38:38 -07:00
Yevgeny Petrilin
38ae6a5354 mlx4_core: Add HW queues allocation helpers
Wrap doorbell, buffer and MTT allocation in helper functions for
ethernet and FC modules to use.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-25 14:27:08 -07:00
Steve French
404e86e155 Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6 2008-04-25 20:20:10 +00:00
Linus Torvalds
b9fa38f75e Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (49 commits)
  [POWERPC] Add zImage.iseries to arch/powerpc/boot/.gitignore
  [POWERPC] bootwrapper: fix build error on virtex405-head.S
  [POWERPC] 4xx: Fix 460GT support to not enable FPU
  [POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dts
  [POWERPC] Xilinx: of_serial support for Xilinx uart 16550.
  [POWERPC] Xilinx: boot support for Xilinx uart 16550.
  [POWERPC] celleb: Add support for PCI Express
  [POWERPC] celleb: Move miscellaneous files for Beat
  [POWERPC] celleb: Move a file for SPU on Beat
  [POWERPC] celleb: Move files for Beat mmu and iommu
  [POWERPC] celleb: Move files for Beat hvcall interfaces
  [POWERPC] celleb: Move the SCC related code for celleb
  [POWERPC] celleb: Move the files for celleb base support
  [POWERPC] celleb: Consolidate io-workarounds code
  [POWERPC] cell: Generalize io-workarounds code
  [POWERPC] Add CONFIG_PPC_PSERIES_DEBUG to enable debugging for platforms/pseries
  [POWERPC] Convert from DBG() to pr_debug() in platforms/pseries/
  [POWERPC] Register udbg console early on pseries LPAR
  [POWERPC] Mark udbg console as CON_ANYTIME, ie. callable early in boot
  [POWERPC] Set udbg_console index to 0
  ...
2008-04-25 12:52:16 -07:00