Commit Graph

108979 Commits

Author SHA1 Message Date
Avi Kivity
7682f2d0dd KVM: VMX: Trivial vmcs_write64() code simplification
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:40:50 +03:00
Chris Lalancette
14ae51b6c0 KVM: SVM: Fake MSR_K7 performance counters
Attached is a patch that fixes a guest crash when booting older Linux kernels.
The problem stems from the fact that we are currently emulating
MSR_K7_EVNTSEL[0-3], but not emulating MSR_K7_PERFCTR[0-3].  Because of this,
setup_k7_watchdog() in the Linux kernel receives a GPF when it attempts to
write into MSR_K7_PERFCTR, which causes an OOPs.

The patch fixes it by just "fake" emulating the appropriate MSRs, throwing
away the data in the process.  This causes the NMI watchdog to not actually
work, but it's not such a big deal in a virtualized environment.

When we get a write to one of these counters, we printk_ratelimit() a warning.
I decided to print it out for all writes, even if the data is 0; it doesn't
seem to make sense to me to special case when data == 0.

Tested by myself on a RHEL-4 guest, and Joerg Roedel on a Windows XP 64-bit
guest.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:40:49 +03:00
Aurelien Jarno
f697554515 KVM: PIT: support mode 3
The in-kernel PIT emulation ignores pending timers if operating
under mode 3, which for example Hurd uses.

This mode should output a square wave, high for (N+1)/2 counts and low
for (N-1)/2 counts. As we only care about the resulting interrupts, the
period is N, and mode 3 is the same as mode 2 with regard to
interrupts.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:40:49 +03:00
Anthony Liguori
2e2e3738af KVM: Handle vma regions with no backing page
This patch allows VMAs that contain no backing page to be used for guest
memory.  This is useful for assigning mmio regions to a guest.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:40:49 +03:00
Joerg Roedel
d2ebb4103f KVM: SVM: add tracing support for TDP page faults
To distinguish between real page faults and nested page faults they should be
traced as different events. This is implemented by this patch.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:40:48 +03:00
Joerg Roedel
af9ca2d703 KVM: SVM: add missing kvmtrace markers
This patch adds the missing kvmtrace markers to the svm
module of kvm.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:40:48 +03:00
Joerg Roedel
54e445ca84 KVM: add missing kvmtrace bits
This patch adds some kvmtrace bits to the generic x86 code
where it is instrumented from SVM.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:40:48 +03:00
Joerg Roedel
a069805579 KVM: SVM: implement dedicated INTR exit handler
With an exit handler for INTR intercepts its possible to account them using
kvmtrace.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:40:47 +03:00
Joerg Roedel
c47f098d69 KVM: SVM: implement dedicated NMI exit handler
With an exit handler for NMI intercepts its possible to account them using
kvmtrace.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:40:47 +03:00
Joerg Roedel
c7bf23babc KVM: VMX: move APIC_ACCESS trace entry to generic code
This patch moves the trace entry for APIC accesses from the VMX code to the
generic lapic code. This way APIC accesses from SVM will also be traced.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:40:47 +03:00
Harvey Harrison
8b2cf73cc1 KVM: add statics were possible, function definition in lapic.h
Noticed by sparse:
arch/x86/kvm/vmx.c:1583:6: warning: symbol 'vmx_disable_intercept_for_msr' was not declared. Should it be static?
arch/x86/kvm/x86.c:3406:5: warning: symbol 'kvm_task_switch_16' was not declared. Should it be static?
arch/x86/kvm/x86.c:3429:5: warning: symbol 'kvm_task_switch_32' was not declared. Should it be static?
arch/x86/kvm/mmu.c:1968:6: warning: symbol 'kvm_mmu_remove_one_alloc_mmu_page' was not declared. Should it be static?
arch/x86/kvm/mmu.c:2014:6: warning: symbol 'mmu_destroy_caches' was not declared. Should it be static?
arch/x86/kvm/lapic.c:862:5: warning: symbol 'kvm_lapic_get_base' was not declared. Should it be static?
arch/x86/kvm/i8254.c:94:5: warning: symbol 'pit_get_gate' was not declared. Should it be static?
arch/x86/kvm/i8254.c:196:5: warning: symbol '__pit_timer_fn' was not declared. Should it be static?
arch/x86/kvm/i8254.c:561:6: warning: symbol '__inject_pit_timer_intr' was not declared. Should it be static?

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:40:46 +03:00
Christian Borntraeger
1e1c65e03e KVM: remove long -> void *user -> long cast
kvm_dev_ioctl casts the arg value to void __user *, just to recast it
again to long. This seems unnecessary.

According to objdump the binary code on x86 is unchanged by this patch.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:40:46 +03:00
Ingo Molnar
ba42059fbd sched: hrtick_enabled() should use cpu_active()
Peter pointed out that hrtick_enabled() should use cpu_active().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 11:02:06 +02:00
Ingo Molnar
d986434a7d Merge branch 'sched/urgent' into sched/devel 2008-07-20 11:01:29 +02:00
Peter Zijlstra
31656519e1 sched, x86: clean up hrtick implementation
random uvesafb failures were reported against Gentoo:

  http://bugs.gentoo.org/show_bug.cgi?id=222799

and Mihai Moldovan bisected it back to:

> 8f4d37ec07 is first bad commit
> commit 8f4d37ec07
> Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
> Date:   Fri Jan 25 21:08:29 2008 +0100
>
>    sched: high-res preemption tick

Linus suspected it to be hrtick + vm86 interaction and observed:

> Btw, Peter, Ingo: I think that commit is doing bad things. They aren't
> _incorrect_ per se, but they are definitely bad.
>
> Why?
>
> Using random _TIF_WORK_MASK flags is really impolite for doing
> "scheduling" work. There's a reason that arch/x86/kernel/entry_32.S
> special-cases the _TIF_NEED_RESCHED flag: we don't want to exit out of
> vm86 mode unnecessarily.
>
> See the "work_notifysig_v86" label, and how it does that
> "save_v86_state()" thing etc etc.

Right, I never liked having to fiddle with those TIF flags. Initially I
needed it because the hrtimer base lock could not nest in the rq lock.
That however is fixed these days.

Currently the only reason left to fiddle with the TIF flags is remote
wakeups. We cannot program a remote cpu's hrtimer. I've been thinking
about using the new and improved IPI function call stuff to implement
hrtimer_start_on().

However that does require that smp_call_function_single(.wait=0) works
from interrupt context - /me looks at the latest series from Jens - Yes
that does seem to be supported, good.

Here's a stab at cleaning this stuff up ...

Mihai reported test success as well.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Mihai Moldovan <ionic@ionic.de>
Cc: Michal Januszewski <spock@gentoo.org>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:37:28 +02:00
Mike Travis
c4762aba0b NR_CPUS: Replace NR_CPUS in speedstep-centrino.c
Some cleanups in speedstep-centrino.c for NR_CPUS=4096.

  * Use new CPUMASK_PTR (instead of old CPUMASK_VAR).

  * Replace arrays sized by NR_CPUS with percpu variables.

  * Cleanup some formatting problems (>80 chars per line)
    and other checkpatch complaints.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:21:12 +02:00
Mike Travis
80422d3431 cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP
* Rename CPUMASK_VAR --> CPUMASK_PTR (and simplify)

  * Fix a semantic error in CPUMASK_ALLOC

  * Add a bit of commentry to cpumask.h

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:21:12 +02:00
Mike Travis
b38868aabe NR_CPUS: Replace NR_CPUS in cpufreq userspace routines
* Replace arrays sized by NR_CPUS with percpu variables.

    Prior reference: http://marc.info/?l=linux-kernel&m=120251421825989&w=4
    Subject:    [PATCH 1/4] cpufreq: change cpu freq tables to per_cpu variables
    From:       Mike Travis <travis () sgi ! com>
    Date:       2008-02-08 23:37:39

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:21:11 +02:00
Mike Travis
94a1e869c7 NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var
* Slight optimization when getting one's own cpu_info percpu data.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:21:11 +02:00
Mike Travis
1bd9d6b64e NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c
* nr_cpu_ids should be used to determine if a percpu area is
    available for a given cpu.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:21:10 +02:00
Mike Travis
247bc6ca0f NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c
* Replace NR_CPUS loop with for_each_possible_cpu().

  * nr_cpu_ids should be used to determine if a percpu area is
    available for a given cpu.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:21:09 +02:00
Mike Travis
f2ad47ffeb NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c
* Use nr_cpu_ids instead of NR_CPUS to limit traversal of cpu online map.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:21:09 +02:00
Mike Travis
6bca67f951 NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c
* nr_cpu_ids should be used to allocate arrays based on the number of
    cpu's present.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:21:08 +02:00
Simon Arlott
e3a61b0a8c x86: add unknown_nmi_panic kernel parameter
It's not possible to enable the unknown_nmi_panic sysctl option
until init is run. It's useful to be able to panic the kernel
during boot too, this adds a parameter to enable this option.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:10:31 +02:00
Ingo Molnar
c4dc59ae7a x86, VisWS: turn into generic arch, eliminate leftover files
remove unused leftovers.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 09:31:24 +02:00
Yinghai Lu
63b5d7af25 x86: add ->pre_time_init to x86_quirks
so NUMAQ can use that to call numaq_pre_time_init()

This allows us to remove a NUMAQ special from arch/x86/kernel/setup.c.

(and paves the way to remove the NUMAQ subarch)

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 09:25:52 +02:00
Yinghai Lu
64898a8bad x86: extend and use x86_quirks to clean up NUMAQ code
add these new x86_quirks methods:

	int *mpc_record;
	int (*mpc_apic_id)(struct mpc_config_processor *m);
	void (*mpc_oem_bus_info)(struct mpc_config_bus *m, char *name);
	void (*mpc_oem_pci_bus)(struct mpc_config_bus *m);
	void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable,
                                    unsigned short oemsize);

... and move NUMAQ related mps table handling to numaq_32.c.

also move the call to smp_read_mpc_oem() to smp_read_mpc() directly.

Should not change functionality, albeit it would be nice to get it
tested on real NUMAQ as well ...

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 09:25:52 +02:00
Yinghai Lu
3c9cb6de1e x86: introduce x86_quirks
introduce x86_quirks array of boot-time quirk methods.

No change in functionality intended.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 09:18:17 +02:00
Yinghai Lu
5f1f2b3d9d x86: improve debug printout: add target bootmem range in early_res_to_bootmem()
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 09:11:07 +02:00
Jussi Kivilinna
175f9c1bba net_sched: Add size table for qdiscs
Add size table functions for qdiscs and calculate packet size in
qdisc_enqueue().

Based on patch by Patrick McHardy
 http://marc.info/?l=linux-netdev&m=115201979221729&w=2

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-20 00:08:47 -07:00
Jussi Kivilinna
0abf77e55a net_sched: Add accessor function for packet length for qdiscs
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-20 00:08:27 -07:00
Jussi Kivilinna
5f86173bdf net_sched: Add qdisc_enqueue wrapper
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-20 00:08:04 -07:00
Yinghai Lu
a83fe32fa6 x86, pci: detect end_bus_number according to acpi/e820 reserved, v2
Jack Howarth reported that 2.6.26-rc9-git9 doesn't boot on MacBookPro2.

the reason is a faulty BIOS update that reportes faulty resources.

Nevertheless it's possible for Linux to be more resolent about this
situation (and similar situations) and work around this bug, by
cross-checking the mmconf range against the e820 table and ACPI resources.

Change the mconf bus range from [0,0xff] to to [0, 0x3f]
to match range [0xf0000000, 0xf4000000) in e820 tables.

[ v2, yhlu.kernel@gmail.com:
  x86, pci: detect end_bus_number according to acpi/e820 reserved - fix ]

Reported-by: Jack Howarth <howarth@bromo.msbb.uc.edu>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: jbarnes@virtuousgeek.org
Cc: Jack Howarth <howarth@bromo.msbb.uc.edu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 08:43:30 +02:00
Ingo Molnar
d092633bff Subject: devmem, x86: fix rename of CONFIG_NONPROMISC_DEVMEM
From: Arjan van de Ven <arjan@infradead.org>
Date: Sat, 19 Jul 2008 15:47:17 -0700

CONFIG_NONPROMISC_DEVMEM was a rather confusing name - but renaming it
to CONFIG_PROMISC_DEVMEM causes problems on architectures that do not
support this feature; this patch renames it to CONFIG_STRICT_DEVMEM,
so that architectures can opt-in into it.

( the polarity of the option is still the same as it was originally; it
  needs to be for now to not break architectures that don't have the
  infastructure yet to support this feature)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: "V.Radhakrishnan" <rk@atr-labs.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
2008-07-20 08:35:55 +02:00
David S. Miller
db7a94d60f highmem: Export totalhigh_pages.
Hash et al. sizing code in SCTP wants to make the
calculation totalram_pages - totalhigh_pages, just
like TCP.  But this requires an export for the
CONFIG_HIGHMEM case to work.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-19 22:39:46 -07:00
YOSHIFUJI Hideaki
a6ffb404dc ipv6 mcast: Omit redundant address family checks in ip6_mc_source().
The caller has alredy checked for them.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-19 22:36:07 -07:00
YOSHIFUJI Hideaki
230b183921 net: Use standard structures for generic socket address structures.
Use sockaddr_storage{} for generic socket address storage
and ensures proper alignment.
Use sockaddr{} for pointers to omit several casts.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-19 22:35:47 -07:00
YOSHIFUJI Hideaki
53b7997fd5 ipv6 netns: Make several "global" sysctl variables namespace aware.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-19 22:35:03 -07:00
YOSHIFUJI Hideaki
721499e893 netns: Use net_eq() to compare net-namespaces for optimization.
Without CONFIG_NET_NS, namespace is always &init_net.
Compiler will be able to omit namespace comparisons with this patch.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-19 22:34:43 -07:00
Pekka Enberg
0ebd652b35 slub: dump more data on slab corruption
The limit of 128 bytes is too small when debugging slab corruption of the skb
cache, for example. So increase the limit to PAGE_SIZE to make debugging
corruptions easier.

Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-07-19 14:17:22 +03:00
Michael Hennerich
9db144fe89 Blackfin arch: Apply Bluetechnix CM-BF527 board support patch
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 17:16:07 +08:00
Robin Getz
f09630bff5 Blackfin arch: Add unwinding for stack info, and a little more detail on trace buffer
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-26 19:45:46 +08:00
Michael Hennerich
0a6304a951 Blackfin arch: Add ISP1760 board resources to BF548-EZKIT
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-26 16:14:57 +08:00
Michael Hennerich
0138da6101 Blackfin arch: fix bug - detect 0.1 silicon revision BF527-EZKIT as 0.0 version
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 16:56:53 +08:00
Mike Frysinger
cc2e16bd35 Blackfin arch: add missing IORESOURCE_MEM flags to UART3
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 16:43:51 +08:00
Graf Yang
aa3348f461 Blackfin arch: Add return value check in bfin_sir_probe(), remove SSYNC().
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 15:54:10 +08:00
Thomas Gleixner
e338125b8a nohz: adjust tick_nohz_stop_sched_tick() call of s390 as well
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-19 09:44:33 +02:00
David Howells
e4f25060b8 sparc: Remove Sparc's asm-offsets for sclow.S
Remove Sparc's asm-offsets for sclow.S as the (E)UID/(E)GID size and
offset definitions will cease to be correct if COW credentials are
merged.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-19 00:44:32 -07:00
Sonic Zhang
262c3825a9 Blackfin arch: Extend sram malloc to handle L2 SRAM.
Extend system call to alloc L2 SRAM in application.
Automatically move following sections to L2 SRAM:
1. kernel built-in l2 attribute section
2. kernel module l2 attribute section
3. elf-fdpic application l2 attribute section

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19 15:42:41 +08:00
David S. Miller
407d819cf0 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6 2008-07-19 00:30:39 -07:00