Commit Graph

113027 Commits

Author SHA1 Message Date
Harvey Harrison
065e9605f9 mac80211: tx.c use new frame control helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27 09:09:18 -04:00
Harvey Harrison
70217d7f83 mac80211: wep.c use new frame control helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27 09:09:17 -04:00
Bob Copeland
3a078876ca ath5k: convert LED code to use mac80211 triggers
This change cleans up the ath5k LED code and converts it to use
the standard LED device class along with the rx/tx LED triggers
provided by mac80211.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27 09:09:17 -04:00
Luis R. Rodriguez
ffd7891dc9 mac80211: Let drivers have access to TKIP key offets for TX and RX MIC
Some drivers may want to to use the TKIP key offsets for TX and RX
MIC so lets move this out. Lets also clear up a bit how this is used
internally in mac80211.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27 09:09:17 -04:00
Ivo van Doorn
61243d8e79 rt2x00: Remove duplicate deinitialization
When rt2x00queue_alloc_rxskbs() fails rt2x00queue_unitialize()
will be called which will free all rxskb. So we don't need
to do this in the rt2x00queue_alloc_rxskb() function as well.

rt2x00queue_free_skb() unmaps the DMA but doesn't clear the
allocation flag. Since the code is copied from rt2x00queue_unmap_skb()
anyway (and that function does clear the flag) we might as well
use that function directly.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27 09:09:17 -04:00
Michael Buesch
923fd7036f b43: Add debugfs firmware debugging knob
This adds a firmware debugging knob to debugfs.
With this knob it's possible to enable advanced runtime firmware
checks.
For now it only implements one sanity check for the mac-suspend.
In future there'll probably be more.
If CONFIG_B43_DEBUG is disabled, these checks will collapse to nothing.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27 09:09:16 -04:00
Michael Buesch
9b839a7453 b43: Add simple firmware watchdog
This adds a simple firmware watchdog for the opensource firmware.
This will check every 15 seconds, if the firmware zeroed out the watchdog
register. The firmware will do this in its eventloop.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27 09:09:16 -04:00
Johannes Berg
9ae705cfd3 mac80211: rename TKIP debugging Kconfig symbol
... to MAC80211_TKIP_DEBUG rather than TKIP_DEBUG.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27 09:09:15 -04:00
Michael Buesch
f225763a7d ssb, b43, b43legacy, b44: Rewrite SSB DMA API
This is a rewrite of the DMA API for SSB devices.
This is needed, because the old (non-existing) "API" made too many bad
assumptions on the API of the host-bus (PCI).
This introduces an almost complete SSB-DMA-API that maps to the lowlevel
bus-API based on the bustype.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27 09:09:15 -04:00
Haavard Skinnemoen
c1f24ac99f avr32: Fix wrong I/O access size in __raw_readsb
__raw_readsb() should always use byte accesses, never halfword accesses,
to I/O memory.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:07:50 +02:00
Martin Koegler
7c1b90a1e9 avr32: Fix sigaltstack behaviour
A signal handler should be able to change the signal stack used for the
next signal by altering the ucontext_t passed as a parameter to the
handler. This does not currently work on avr32 since it doesn't update
the in-kernel signal context from the ucontext_t upon signal handler
return.

Fix it by adding a call to do_sigaltstack() from sys_rt_sigreturn(),
bringing it in line with most other architectures.

Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
[haavard.skinnemoen@atmel.com: changed patch description]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:07:35 +02:00
Alex
60ed7951d0 avr32: Allow board to define oscillator rates
On our custom board we have other oscillator rates than on atngw100 and
atstk100x.

Currently these rates are hardcoded in arch/avr32/mach-at32ap/at32ap700x.c.

This patch moves them into board specific code.

Signed-off-by: Alex Raimondi <raimondi@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:07:16 +02:00
Haavard Skinnemoen
8bd8974fcd avr32: export empty_zero_page
Fixes one of two ext4 build problems:
ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined!

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:07:07 +02:00
Haavard Skinnemoen
b788ed5c97 avr32: Provide PCI DMA mapping API
Some non-PCI drivers need the PCI variant of the DMA mapping API.
Include <asm-generic/pci-dma-compat.h> to provide this through the
non-PCI DMA mapping API.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:07:01 +02:00
Ingo Molnar
4c9fe8ad81 sched: export cpu_clock
the rcutorture module relies on cpu_clock.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:49:06 +02:00
Dhaval Giani
55e12e5e7b sched: make sched_{rt,fair}.c ifdefs more readable
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:32:05 +02:00
Peter Zijlstra
f5bfb7d9ff sched: bias effective_load() error towards failing wake_affine().
Measurement shows that the difference between cgroup:/ and cgroup:/foo
wake_affine() results is that the latter succeeds significantly more.

Therefore bias the calculations towards failing the test.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:47 +02:00
Peter Zijlstra
f1d239f732 sched: incremental effective_load()
Increase the accuracy of the effective_load values.

Not only consider the current increment (as per the attempted wakeup), but
also consider the delta between when we last adjusted the shares and the
current situation.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:47 +02:00
Peter Zijlstra
83378269a5 sched: correct wakeup weight calculations
rw_i = {2, 4, 1, 0}
s_i = {2/7, 4/7, 1/7, 0}

wakeup on cpu0, weight=1

rw'_i = {3, 4, 1, 0}
s'_i = {3/8, 4/8, 1/8, 0}

s_0 = S * rw_0 / \Sum rw_j ->
  \Sum rw_j = S*rw_0/s_0 = 1*2*7/2 = 7 (correct)

s'_0 = S * (rw_0 + 1) / (\Sum rw_j + 1) =
       1 * (2+1) / (7+1) = 3/8 (correct

so we find that adding 1 to cpu0 gains 5/56 in weight
if say the other cpu were, cpu1, we'd also have to calculate its 4/56 loss

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:46 +02:00
Srivatsa Vaddagiri
243e0e7b7d sched: fix mult overflow
It was observed these mults can overflow.

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:45 +02:00
Peter Zijlstra
2398f2c6d3 sched: update shares on wakeup
We found that the affine wakeup code needs rather accurate load figures
to be effective. The trouble is that updating the load figures is fairly
expensive with group scheduling. Therefore ratelimit the updating.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:45 +02:00
Peter Zijlstra
cd80917e4f sched: fix shares boost logic
In case the domain is empty, pretend there is a single task on each cpu, so
that together with the boost logic we end up giving 1/n shares to each
cpu.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:44 +02:00
Peter Zijlstra
93b75217df sched: disable source/target_load bias
The bias given by source/target_load functions can be very large, disable
it by default to get faster convergence.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:44 +02:00
Peter Zijlstra
cb5ef42a03 sched: optimize effective_load()
s_i = S * rw_i / \Sum_j rw_j

 -> \Sum_j rw_j = S * rw_i / s_i

 -> s'_i = S * (rw_i + w) / (\Sum_j rw_j + w)

delta s = s' - s = S * (rw + w) / ((S * rw / s) + w)
        = s * (S * (rw + w) / (S * rw + s * w) - 1)

 a = S*(rw+w), b = S*rw + s*w

delta s = s * (a-b) / b

IOW, trade one divide for two multiplies

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:43 +02:00
Peter Zijlstra
051c67640e sched: remove prio preference from balance decisions
Priority looses much of its meaning in a hierarchical context. So don't
use it in balance decisions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:42 +02:00
Peter Zijlstra
4be9daaa1b sched: fix task_h_load()
Currently task_h_load() computes the load of a task and uses that to either
subtract it from the total, or add to it.

However, removing or adding a task need not have any effect on the total load
at all. Imagine adding a task to a group that is local to one cpu - in that
case the total load of that cpu is unaffected.

So properly compute addition/removal:

 s_i = S * rw_i / \Sum_j rw_j
 s'_i = S * (rw_i + wl) / (\Sum_j rw_j + wg)

then s'_i - s_i gives the change in load.

Where s_i is the shares for cpu i, S the group weight, rw_i the runqueue weight
for that cpu, wl the weight we add (subtract) and wg the weight contribution to
the runqueue.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:42 +02:00
Peter Zijlstra
42a3ac7d5c sched: fix load scaling in group balancing
doing the load balance will change cfs_rq->load.weight (that's the whole point)
but since that's part of the scale factor, we'll scale back with a different
amount.

Weight getting smaller would result in an inflated moved_load which causes
it to stop balancing too soon.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:41 +02:00
Peter Zijlstra
408ed066b1 sched: hierarchical load vs find_busiest_group
find_busiest_group() has some assumptions about task weight being in the
NICE_0_LOAD range. Hierarchical task groups break this assumption - fix this
by replacing it with the average task weight, which will adapt the situation.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:40 +02:00
Peter Zijlstra
bb3469ac9b sched: hierarchical load vs affine wakeups
With hierarchical grouping we can't just compare task weight to rq weight - we
need to scale the weight appropriately.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:40 +02:00
Peter Zijlstra
a8a51d5e59 sched: persistent average load per task
Remove the fall-back to SCHED_LOAD_SCALE by remembering the previous value of
cpu_avg_load_per_task() - this is useful because of the hierarchical group
model in which task weight can be much smaller.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:39 +02:00
Peter Zijlstra
039a1c41b3 sched: fix sched_balance_self() smp group balancing
Finding the least idle cpu is more accurate when done with updated shares.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:38 +02:00
Peter Zijlstra
3e5459b4be sched: fix newidle smp group balancing
Re-compute the shares on newidle - so we can make a decision based on
recent data.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:37 +02:00
Peter Zijlstra
c8cba857b4 sched: simplify the group load balancer
While thinking about the previous patch - I realized that using per domain
aggregate load values in load_balance_fair() is wrong. We should use the
load value for that CPU.

By not needing per domain hierarchical load values we don't need to store
per domain aggregate shares, which greatly simplifies all the math.

It basically falls apart in two separate computations:
 - per domain update of the shares
 - per CPU update of the hierarchical load

Also get rid of the move_group_shares() stuff - just re-compute the shares
again after a successful load balance.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:36 +02:00
Peter Zijlstra
a25b5aca87 sched: no need to aggregate task_weight
We only need to know the task_weight of the busiest rq - nothing to do
if there are no tasks there.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:35 +02:00
Peter Zijlstra
d3f40dbab9 sched: dont micro manage share losses
We used to try and contain the loss of 'shares' by playing arithmetic
games. Replace that by noticing that at the top sched_domain we'll
always have the full weight in shares to distribute.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:34 +02:00
Srivatsa Vaddagiri
53fecd8ae1 sched: kill task_group balancing
The idea was to balance groups until we've reached the global goal, however
Vatsa rightly pointed out that we might never reach that goal this way -
hence take out this logic.

[ the initial rationale for this 'feature' was to promote max concurrency
  within a group - it does not however affect fairness ]

Reported-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:33 +02:00
Peter Zijlstra
4d8d595dfa sched: update aggregate when holding the RQs
It was observed that in __update_group_shares_cpu()

  rq_weight > aggregate()->rq_weight

This is caused by forks/wakeups in between the initial aggregate pass and
locking of the RQs for load balance. To avoid this situation partially re-do
the aggregation once we have the RQs locked (which avoids new tasks from
appearing).

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:33 +02:00
Peter Zijlstra
b6a86c746f sched: fix sched_domain aggregation
Keeping the aggregate on the first cpu of the sched domain has two problems:
 - it could collide between different sched domains on different cpus
 - it could slow things down because of the remote accesses

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:32 +02:00
Peter Zijlstra
32df2ee86a sched: add full schedstats to /proc/sched_debug
show all the schedstats in /debug/sched_debug as well.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:31 +02:00
Peter Zijlstra
103638d95b sched: fix wakeup granularity and buddy granularity
Uncouple buddy selection from wakeup granularity.

The initial idea was that buddies could run ahead as far as a normal task
can - do this by measuring a pair 'slice' just as we do for a normal task.

This means we can drop the wakeup_granularity back to 5ms.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:31 +02:00
Peter Zijlstra
76a2a6ee8a sched: sched_clock_cpu() based cpu_clock()
with sched_clock_cpu() being reasonably in sync between cpus (max 1 jiffy
difference) use this to provide cpu_clock().

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:30 +02:00
Peter Zijlstra
c09595f63b sched: revert revert of: fair-group: SMP-nice for group scheduling
Try again..

Initial commit: 18d95a2832
Revert: 6363ca57c7

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:29 +02:00
Peter Zijlstra
ced8aa16e1 sched: fix calc_delta_asym, #2
Ok, so why are we in this mess, it was:

  1/w

but now we mixed that rw in the mix like:

 rw/w

rw being \Sum w suggests: fiddling w, we should also fiddle rw, humm?

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:28 +02:00
Peter Zijlstra
c9c294a630 sched: fix calc_delta_asym()
calc_delta_asym() is supposed to do the same as calc_delta_fair() except
linearly shrink the result for negative nice processes - this causes them
to have a smaller preemption threshold so that they are more easily preempted.

The problem is that for task groups se->load.weight is the per cpu share of
the actual task group weight; take that into account.

Also provide a debug switch to disable the asymmetry (which I still don't
like - but it does greatly benefit some workloads)

This would explain the interactivity issues reported against group scheduling.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:28 +02:00
Peter Zijlstra
a7be37ac8e sched: revert the revert of: weight calculations
Try again..

initial commit: 8f1bc385cf
revert: f9305d4a09

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:27 +02:00
Peter Zijlstra
bf647b62fd sched: clean up some unused variables
In file included from /mnt/build/linux-2.6/kernel/sched.c:1496:
/mnt/build/linux-2.6/kernel/sched_rt.c: In function '__enable_runtime':
/mnt/build/linux-2.6/kernel/sched_rt.c:339: warning: unused variable 'rd'
/mnt/build/linux-2.6/kernel/sched_rt.c: In function 'requeue_rt_entity':
/mnt/build/linux-2.6/kernel/sched_rt.c:692: warning: unused variable 'queue'

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:26 +02:00
David S. Miller
7ac3b02536 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6 2008-06-27 04:26:58 -07:00
Ingo Molnar
8b604d5207 fix: "smp_call_function: get rid of the unused nonatomic/retry argument"
drivers/char/sysrq.c: In function 'sysrq_showregs_othercpus':
drivers/char/sysrq.c:218: error: too many arguments to function 'smp_call_function'

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 11:52:45 +02:00
Ingo Molnar
ce0d1b6f73 fix: "smp_call_function: get rid of the unused nonatomic/retry argument"
fix:

kernel/smp.c: In function 'smp_call_function_mask':
kernel/smp.c:303: error: too many arguments to function 'smp_call_function_single'

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 11:50:32 +02:00
Ingo Molnar
127a237a1f fix "smp_call_function: get rid of the unused nonatomic/retry argument"
fix:

arch/x86/kernel/process.c: In function 'cpu_idle_wait':
arch/x86/kernel/process.c:64: error: too many arguments to function 'smp_call_function'

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 11:48:22 +02:00