linux-legacy/arch/arm/mach-mx37/system.c

/*
 * Copyright 2007-2009 Freescale Semiconductor, Inc. All Rights Reserved.
 */

/*
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */
#define DEBUG
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/proc-fns.h>
#include <asm/system.h>
#include <asm/cacheflush.h>
#include <mach/clock.h>
#include "crm_regs.h"

/*!
 * @defgroup MSL_MX37 i.MX37 Machine Specific Layer (MSL)
 */

/*!
 * @file mach-mx37/system.c
 * @brief This file contains idle and reset functions.
 *
 * @ingroup MSL_MX37
 */

extern int mxc_jtag_enabled;
extern int low_bus_freq_mode;

static struct clk *gpc_dvfs_clk;

/* set cpu low power mode before WFI instruction */
void mxc_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
{
	u32 plat_lpc, gpc_pgr, arm_srpgcr, empgcr0, empgcr1, ccm_clpcr;
	/* always allow platform to issue a deep sleep mode request */
	plat_lpc = __raw_readl(MXC_ARM1176_PLAT_LPC) &
	    ~(MXC_ARM1176_PLAT_LPC_DSM);

	ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
	gpc_pgr = __raw_readl(MXC_GPC_PGR) & ~(MXC_GPC_PGR_ARMPG_MASK);
	arm_srpgcr = __raw_readl(MXC_SRPGC_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
	empgcr0 = __raw_readl(MXC_EMPGC0_ARM_EMPGCR) & ~(MXC_EMPGCR_PCR);
	empgcr1 = __raw_readl(MXC_EMPGC1_ARM_EMPGCR) & ~(MXC_EMPGCR_PCR);

	switch (mode) {
	case WAIT_CLOCKED:
		break;
	case WAIT_UNCLOCKED:
		ccm_clpcr |= (0x1 << MXC_CCM_CLPCR_LPM_OFFSET);
		break;
	case WAIT_UNCLOCKED_POWER_OFF:
	case STOP_POWER_OFF:
		plat_lpc |= MXC_ARM1176_PLAT_LPC_DSM;
		if (mode == WAIT_UNCLOCKED_POWER_OFF)
			ccm_clpcr |= (0x1 << MXC_CCM_CLPCR_LPM_OFFSET);
		else {
			ccm_clpcr |= (0x2 << MXC_CCM_CLPCR_LPM_OFFSET);
			ccm_clpcr |= (0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET);
			ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
			ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
		}

		gpc_pgr |= (0x1 << MXC_GPC_PGR_ARMPG_OFFSET);
		arm_srpgcr |= MXC_SRPGCR_PCR;
		empgcr0 |= MXC_EMPGCR_PCR;
		empgcr1 |= MXC_EMPGCR_PCR;

		if (tzic_enable_wake(1) != 0)
			return;
		break;
	case STOP_POWER_ON:
		ccm_clpcr |= (0x2 << MXC_CCM_CLPCR_LPM_OFFSET);
		break;
	default:
		printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
		return;
	}

	__raw_writel(plat_lpc, MXC_ARM1176_PLAT_LPC);
	__raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
	__raw_writel(gpc_pgr, MXC_GPC_PGR);
	__raw_writel(arm_srpgcr, MXC_SRPGC_ARM_SRPGCR);
	if ((mxc_cpu_is_rev(CHIP_REV_1_0)) != 1)
		__raw_writel(empgcr0, MXC_EMPGC0_ARM_EMPGCR);

	flush_cache_all();

	if (gpc_dvfs_clk == NULL)
		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs_clk");

	/* gpc clock is needed for SRPG */
	clk_enable(gpc_dvfs_clk);
}

void mxc_pg_enable(struct platform_device *pdev)
{
	if (pdev == NULL)
		return;

	if (strcmp(pdev->name, "mxc_ipu") == 0) {
		__raw_writel(MXC_PGCR_PCR, MXC_PGC_IPU_PGCR);
		__raw_writel(MXC_PGSR_PSR, MXC_PGC_IPU_PGSR);
	} else if (strcmp(pdev->name, "mxc_vpu") == 0) {
		__raw_writel(MXC_PGCR_PCR, MXC_PGC_VPU_PGCR);
		__raw_writel(MXC_PGSR_PSR, MXC_PGC_VPU_PGSR);
	}
}

EXPORT_SYMBOL(mxc_pg_enable);

void mxc_pg_disable(struct platform_device *pdev)
{
	if (pdev == NULL)
		return;

	if (strcmp(pdev->name, "mxc_ipu") == 0) {
		__raw_writel(0x0, MXC_PGC_IPU_PGCR);
		if (__raw_readl(MXC_PGC_IPU_PGSR) & MXC_PGSR_PSR)
			dev_dbg(&pdev->dev, "power gating successful\n");
		__raw_writel(MXC_PGSR_PSR, MXC_PGC_IPU_PGSR);
	} else if (strcmp(pdev->name, "mxc_vpu") == 0) {
		__raw_writel(0x0, MXC_PGC_VPU_PGCR);
		if (__raw_readl(MXC_PGC_VPU_PGSR) & MXC_PGSR_PSR)
			dev_dbg(&pdev->dev, "power gating successful\n");
		__raw_writel(MXC_PGSR_PSR, MXC_PGC_VPU_PGSR);
	}
}

EXPORT_SYMBOL(mxc_pg_disable);

/* To change the idle power mode, need to set arch_idle_mode to a different
 * power mode as in enum mxc_cpu_pwr_mode.
 * May allow dynamically changing the idle mode.
 */
static int arch_idle_mode = WAIT_UNCLOCKED_POWER_OFF;

/*!
 * This function puts the CPU into idle mode. It is called by default_idle()
 * in process.c file.
 */
void arch_idle(void)
{
	if (likely(!mxc_jtag_enabled)) {
		mxc_cpu_lp_set(arch_idle_mode);
		cpu_do_idle();
		/* gpc clock is needed for SRPG */
		clk_disable(gpc_dvfs_clk);
	}
}

/*
 * This function resets the system. It is called by machine_restart().
 *
 * @param  mode         indicates different kinds of resets
 */
void arch_reset(char mode)
{
	/* Assert SRS signal */
	mxc_wd_reset();
}