mirror of
https://github.com/genesi/linux-legacy.git
synced 2026-07-19 15:15:06 +00:00
f3aead3d77
Enable the ssp mmc port0~1, the set_rate, set_parent to refio.0 clock, and the HighSpeed mode, SD up to 4bits and 50MHz, MMC up to 8bits and 52MHz. Resolved the urgly IO bench and some cards unrecognization issues. The root cause is the clk unit of clock should be Hz, but not the KHz Signed-off-by: Richard Zhu <r65037@freescale.com>
43 lines
1.3 KiB
Makefile
43 lines
1.3 KiB
Makefile
#
|
|
# Makefile for MMC/SD host controller drivers
|
|
#
|
|
|
|
ifeq ($(CONFIG_MMC_DEBUG),y)
|
|
EXTRA_CFLAGS += -DDEBUG
|
|
endif
|
|
|
|
obj-$(CONFIG_MMC_ARMMMCI) += mmci.o
|
|
obj-$(CONFIG_MMC_PXA) += pxamci.o
|
|
obj-$(CONFIG_MMC_IMX) += imxmmc.o
|
|
obj-$(CONFIG_MMC_MXC) += mxc_mmc.o
|
|
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
|
|
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
|
|
obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
|
|
obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
|
|
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
|
|
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
|
|
obj-$(CONFIG_MMC_IMX_ESDHCI) += mx_sdhci.o
|
|
obj-$(CONFIG_MMC_STMP3XXX) += stmp3xxx_mmc.o
|
|
obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
|
|
obj-$(CONFIG_MMC_WBSD) += wbsd.o
|
|
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
|
|
obj-$(CONFIG_MMC_OMAP) += omap.o
|
|
obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
|
|
obj-$(CONFIG_MMC_AT91) += at91_mci.o
|
|
obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
|
|
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
|
|
obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o
|
|
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
|
|
ifeq ($(CONFIG_OF),y)
|
|
obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o
|
|
endif
|
|
obj-$(CONFIG_MMC_S3C) += s3cmci.o
|
|
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
|
|
obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
|
|
obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
|
|
obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o
|
|
|
|
ifeq ($(CONFIG_CB710_DEBUG),y)
|
|
CFLAGS-cb710-mmc += -DDEBUG
|
|
endif
|